ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.167.89.160/27
network10.167.89.160/27
broadcast10.167.89.191
first host10.167.89.161
last host10.167.89.190
subnet mask255.255.255.224
wildcard0.0.0.31
addresses32
usable hosts30
classA
ipcalc 10.167.89.160/27
address00001010.10100111.01011001.10100000
subnet mask11111111.11111111.11111111.11100000
network00001010.10100111.01011001.10100000
broadcast00001010.10100111.01011001.10111111
green = network part, grey = host part
hex0x0aa759a0
decimal178739616
reverse dns160.89.167.10.in-addr.arpa
ipv4-mapped::ffff:aa7:59a0

/27 split into /32 · 32 subnets

close ×
#networkhost rangebroadcast
110.167.89.160/3210.167.89.160 – 10.167.89.16010.167.89.160
210.167.89.161/3210.167.89.161 – 10.167.89.16110.167.89.161
310.167.89.162/3210.167.89.162 – 10.167.89.16210.167.89.162
410.167.89.163/3210.167.89.163 – 10.167.89.16310.167.89.163
510.167.89.164/3210.167.89.164 – 10.167.89.16410.167.89.164
610.167.89.165/3210.167.89.165 – 10.167.89.16510.167.89.165
710.167.89.166/3210.167.89.166 – 10.167.89.16610.167.89.166
810.167.89.167/3210.167.89.167 – 10.167.89.16710.167.89.167
910.167.89.168/3210.167.89.168 – 10.167.89.16810.167.89.168
1010.167.89.169/3210.167.89.169 – 10.167.89.16910.167.89.169
1110.167.89.170/3210.167.89.170 – 10.167.89.17010.167.89.170
1210.167.89.171/3210.167.89.171 – 10.167.89.17110.167.89.171
1310.167.89.172/3210.167.89.172 – 10.167.89.17210.167.89.172
1410.167.89.173/3210.167.89.173 – 10.167.89.17310.167.89.173
1510.167.89.174/3210.167.89.174 – 10.167.89.17410.167.89.174
1610.167.89.175/3210.167.89.175 – 10.167.89.17510.167.89.175
1710.167.89.176/3210.167.89.176 – 10.167.89.17610.167.89.176
1810.167.89.177/3210.167.89.177 – 10.167.89.17710.167.89.177
1910.167.89.178/3210.167.89.178 – 10.167.89.17810.167.89.178
2010.167.89.179/3210.167.89.179 – 10.167.89.17910.167.89.179
2110.167.89.180/3210.167.89.180 – 10.167.89.18010.167.89.180
2210.167.89.181/3210.167.89.181 – 10.167.89.18110.167.89.181
2310.167.89.182/3210.167.89.182 – 10.167.89.18210.167.89.182
2410.167.89.183/3210.167.89.183 – 10.167.89.18310.167.89.183
2510.167.89.184/3210.167.89.184 – 10.167.89.18410.167.89.184
2610.167.89.185/3210.167.89.185 – 10.167.89.18510.167.89.185
2710.167.89.186/3210.167.89.186 – 10.167.89.18610.167.89.186
2810.167.89.187/3210.167.89.187 – 10.167.89.18710.167.89.187
2910.167.89.188/3210.167.89.188 – 10.167.89.18810.167.89.188
3010.167.89.189/3210.167.89.189 – 10.167.89.18910.167.89.189
3110.167.89.190/3210.167.89.190 – 10.167.89.19010.167.89.190
3210.167.89.191/3210.167.89.191 – 10.167.89.19110.167.89.191
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /27
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.1926462-
/27255.255.255.22432301
/28255.255.255.24016142 split →
/29255.255.255.248864 split →
/30255.255.255.252428 split →
/31255.255.255.2542216 split →
/32255.255.255.2551132 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →