ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.167.89.0/24
network10.167.89.0/24
broadcast10.167.89.255
first host10.167.89.1
last host10.167.89.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.167.89.0/24
address00001010.10100111.01011001.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.10100111.01011001.00000000
broadcast00001010.10100111.01011001.11111111
green = network part, grey = host part
hex0x0aa75900
decimal178739456
reverse dns0.89.167.10.in-addr.arpa
ipv4-mapped::ffff:aa7:5900

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.167.89.0/3010.167.89.1 – 10.167.89.210.167.89.3
210.167.89.4/3010.167.89.5 – 10.167.89.610.167.89.7
310.167.89.8/3010.167.89.9 – 10.167.89.1010.167.89.11
410.167.89.12/3010.167.89.13 – 10.167.89.1410.167.89.15
510.167.89.16/3010.167.89.17 – 10.167.89.1810.167.89.19
610.167.89.20/3010.167.89.21 – 10.167.89.2210.167.89.23
710.167.89.24/3010.167.89.25 – 10.167.89.2610.167.89.27
810.167.89.28/3010.167.89.29 – 10.167.89.3010.167.89.31
910.167.89.32/3010.167.89.33 – 10.167.89.3410.167.89.35
1010.167.89.36/3010.167.89.37 – 10.167.89.3810.167.89.39
1110.167.89.40/3010.167.89.41 – 10.167.89.4210.167.89.43
1210.167.89.44/3010.167.89.45 – 10.167.89.4610.167.89.47
1310.167.89.48/3010.167.89.49 – 10.167.89.5010.167.89.51
1410.167.89.52/3010.167.89.53 – 10.167.89.5410.167.89.55
1510.167.89.56/3010.167.89.57 – 10.167.89.5810.167.89.59
1610.167.89.60/3010.167.89.61 – 10.167.89.6210.167.89.63
1710.167.89.64/3010.167.89.65 – 10.167.89.6610.167.89.67
1810.167.89.68/3010.167.89.69 – 10.167.89.7010.167.89.71
1910.167.89.72/3010.167.89.73 – 10.167.89.7410.167.89.75
2010.167.89.76/3010.167.89.77 – 10.167.89.7810.167.89.79
2110.167.89.80/3010.167.89.81 – 10.167.89.8210.167.89.83
2210.167.89.84/3010.167.89.85 – 10.167.89.8610.167.89.87
2310.167.89.88/3010.167.89.89 – 10.167.89.9010.167.89.91
2410.167.89.92/3010.167.89.93 – 10.167.89.9410.167.89.95
2510.167.89.96/3010.167.89.97 – 10.167.89.9810.167.89.99
2610.167.89.100/3010.167.89.101 – 10.167.89.10210.167.89.103
2710.167.89.104/3010.167.89.105 – 10.167.89.10610.167.89.107
2810.167.89.108/3010.167.89.109 – 10.167.89.11010.167.89.111
2910.167.89.112/3010.167.89.113 – 10.167.89.11410.167.89.115
3010.167.89.116/3010.167.89.117 – 10.167.89.11810.167.89.119
3110.167.89.120/3010.167.89.121 – 10.167.89.12210.167.89.123
3210.167.89.124/3010.167.89.125 – 10.167.89.12610.167.89.127
3310.167.89.128/3010.167.89.129 – 10.167.89.13010.167.89.131
3410.167.89.132/3010.167.89.133 – 10.167.89.13410.167.89.135
3510.167.89.136/3010.167.89.137 – 10.167.89.13810.167.89.139
3610.167.89.140/3010.167.89.141 – 10.167.89.14210.167.89.143
3710.167.89.144/3010.167.89.145 – 10.167.89.14610.167.89.147
3810.167.89.148/3010.167.89.149 – 10.167.89.15010.167.89.151
3910.167.89.152/3010.167.89.153 – 10.167.89.15410.167.89.155
4010.167.89.156/3010.167.89.157 – 10.167.89.15810.167.89.159
4110.167.89.160/3010.167.89.161 – 10.167.89.16210.167.89.163
4210.167.89.164/3010.167.89.165 – 10.167.89.16610.167.89.167
4310.167.89.168/3010.167.89.169 – 10.167.89.17010.167.89.171
4410.167.89.172/3010.167.89.173 – 10.167.89.17410.167.89.175
4510.167.89.176/3010.167.89.177 – 10.167.89.17810.167.89.179
4610.167.89.180/3010.167.89.181 – 10.167.89.18210.167.89.183
4710.167.89.184/3010.167.89.185 – 10.167.89.18610.167.89.187
4810.167.89.188/3010.167.89.189 – 10.167.89.19010.167.89.191
4910.167.89.192/3010.167.89.193 – 10.167.89.19410.167.89.195
5010.167.89.196/3010.167.89.197 – 10.167.89.19810.167.89.199
5110.167.89.200/3010.167.89.201 – 10.167.89.20210.167.89.203
5210.167.89.204/3010.167.89.205 – 10.167.89.20610.167.89.207
5310.167.89.208/3010.167.89.209 – 10.167.89.21010.167.89.211
5410.167.89.212/3010.167.89.213 – 10.167.89.21410.167.89.215
5510.167.89.216/3010.167.89.217 – 10.167.89.21810.167.89.219
5610.167.89.220/3010.167.89.221 – 10.167.89.22210.167.89.223
5710.167.89.224/3010.167.89.225 – 10.167.89.22610.167.89.227
5810.167.89.228/3010.167.89.229 – 10.167.89.23010.167.89.231
5910.167.89.232/3010.167.89.233 – 10.167.89.23410.167.89.235
6010.167.89.236/3010.167.89.237 – 10.167.89.23810.167.89.239
6110.167.89.240/3010.167.89.241 – 10.167.89.24210.167.89.243
6210.167.89.244/3010.167.89.245 – 10.167.89.24610.167.89.247
6310.167.89.248/3010.167.89.249 – 10.167.89.25010.167.89.251
6410.167.89.252/3010.167.89.253 – 10.167.89.25410.167.89.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →