ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
private IP (RFC 1918)10.167.82.0/23
network10.167.82.0/23
broadcast10.167.83.255
first host10.167.82.1
last host10.167.83.254
subnet mask255.255.254.0
wildcard0.0.1.255
addresses512
usable hosts510
classA
ipcalc 10.167.82.0/23
address00001010.10100111.01010010.00000000
subnet mask11111111.11111111.11111110.00000000
network00001010.10100111.01010010.00000000
broadcast00001010.10100111.01010011.11111111
green = network part, grey = host part
hex0x0aa75200
decimal178737664
reverse dns0.82.167.10.in-addr.arpa
ipv4-mapped::ffff:aa7:5200

/23 split into /29 · 64 subnets

close ×
#networkhost rangebroadcast
110.167.82.0/2910.167.82.1 – 10.167.82.610.167.82.7
210.167.82.8/2910.167.82.9 – 10.167.82.1410.167.82.15
310.167.82.16/2910.167.82.17 – 10.167.82.2210.167.82.23
410.167.82.24/2910.167.82.25 – 10.167.82.3010.167.82.31
510.167.82.32/2910.167.82.33 – 10.167.82.3810.167.82.39
610.167.82.40/2910.167.82.41 – 10.167.82.4610.167.82.47
710.167.82.48/2910.167.82.49 – 10.167.82.5410.167.82.55
810.167.82.56/2910.167.82.57 – 10.167.82.6210.167.82.63
910.167.82.64/2910.167.82.65 – 10.167.82.7010.167.82.71
1010.167.82.72/2910.167.82.73 – 10.167.82.7810.167.82.79
1110.167.82.80/2910.167.82.81 – 10.167.82.8610.167.82.87
1210.167.82.88/2910.167.82.89 – 10.167.82.9410.167.82.95
1310.167.82.96/2910.167.82.97 – 10.167.82.10210.167.82.103
1410.167.82.104/2910.167.82.105 – 10.167.82.11010.167.82.111
1510.167.82.112/2910.167.82.113 – 10.167.82.11810.167.82.119
1610.167.82.120/2910.167.82.121 – 10.167.82.12610.167.82.127
1710.167.82.128/2910.167.82.129 – 10.167.82.13410.167.82.135
1810.167.82.136/2910.167.82.137 – 10.167.82.14210.167.82.143
1910.167.82.144/2910.167.82.145 – 10.167.82.15010.167.82.151
2010.167.82.152/2910.167.82.153 – 10.167.82.15810.167.82.159
2110.167.82.160/2910.167.82.161 – 10.167.82.16610.167.82.167
2210.167.82.168/2910.167.82.169 – 10.167.82.17410.167.82.175
2310.167.82.176/2910.167.82.177 – 10.167.82.18210.167.82.183
2410.167.82.184/2910.167.82.185 – 10.167.82.19010.167.82.191
2510.167.82.192/2910.167.82.193 – 10.167.82.19810.167.82.199
2610.167.82.200/2910.167.82.201 – 10.167.82.20610.167.82.207
2710.167.82.208/2910.167.82.209 – 10.167.82.21410.167.82.215
2810.167.82.216/2910.167.82.217 – 10.167.82.22210.167.82.223
2910.167.82.224/2910.167.82.225 – 10.167.82.23010.167.82.231
3010.167.82.232/2910.167.82.233 – 10.167.82.23810.167.82.239
3110.167.82.240/2910.167.82.241 – 10.167.82.24610.167.82.247
3210.167.82.248/2910.167.82.249 – 10.167.82.25410.167.82.255
3310.167.83.0/2910.167.83.1 – 10.167.83.610.167.83.7
3410.167.83.8/2910.167.83.9 – 10.167.83.1410.167.83.15
3510.167.83.16/2910.167.83.17 – 10.167.83.2210.167.83.23
3610.167.83.24/2910.167.83.25 – 10.167.83.3010.167.83.31
3710.167.83.32/2910.167.83.33 – 10.167.83.3810.167.83.39
3810.167.83.40/2910.167.83.41 – 10.167.83.4610.167.83.47
3910.167.83.48/2910.167.83.49 – 10.167.83.5410.167.83.55
4010.167.83.56/2910.167.83.57 – 10.167.83.6210.167.83.63
4110.167.83.64/2910.167.83.65 – 10.167.83.7010.167.83.71
4210.167.83.72/2910.167.83.73 – 10.167.83.7810.167.83.79
4310.167.83.80/2910.167.83.81 – 10.167.83.8610.167.83.87
4410.167.83.88/2910.167.83.89 – 10.167.83.9410.167.83.95
4510.167.83.96/2910.167.83.97 – 10.167.83.10210.167.83.103
4610.167.83.104/2910.167.83.105 – 10.167.83.11010.167.83.111
4710.167.83.112/2910.167.83.113 – 10.167.83.11810.167.83.119
4810.167.83.120/2910.167.83.121 – 10.167.83.12610.167.83.127
4910.167.83.128/2910.167.83.129 – 10.167.83.13410.167.83.135
5010.167.83.136/2910.167.83.137 – 10.167.83.14210.167.83.143
5110.167.83.144/2910.167.83.145 – 10.167.83.15010.167.83.151
5210.167.83.152/2910.167.83.153 – 10.167.83.15810.167.83.159
5310.167.83.160/2910.167.83.161 – 10.167.83.16610.167.83.167
5410.167.83.168/2910.167.83.169 – 10.167.83.17410.167.83.175
5510.167.83.176/2910.167.83.177 – 10.167.83.18210.167.83.183
5610.167.83.184/2910.167.83.185 – 10.167.83.19010.167.83.191
5710.167.83.192/2910.167.83.193 – 10.167.83.19810.167.83.199
5810.167.83.200/2910.167.83.201 – 10.167.83.20610.167.83.207
5910.167.83.208/2910.167.83.209 – 10.167.83.21410.167.83.215
6010.167.83.216/2910.167.83.217 – 10.167.83.22210.167.83.223
6110.167.83.224/2910.167.83.225 – 10.167.83.23010.167.83.231
6210.167.83.232/2910.167.83.233 – 10.167.83.23810.167.83.239
6310.167.83.240/2910.167.83.241 – 10.167.83.24610.167.83.247
6410.167.83.248/2910.167.83.249 – 10.167.83.25410.167.83.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /23
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.05125101
/24255.255.255.02562542 split →
/25255.255.255.1281281264 split →
/26255.255.255.19264628 split →
/27255.255.255.224323016 split →
/28255.255.255.240161432 split →
/29255.255.255.2488664 split →
/30255.255.255.25242128 split →
/31255.255.255.25422256 split →
/32255.255.255.25511512 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →