ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.167.75.0/24
network10.167.75.0/24
broadcast10.167.75.255
first host10.167.75.1
last host10.167.75.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.167.75.0/24
address00001010.10100111.01001011.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.10100111.01001011.00000000
broadcast00001010.10100111.01001011.11111111
green = network part, grey = host part
hex0x0aa74b00
decimal178735872
reverse dns0.75.167.10.in-addr.arpa
ipv4-mapped::ffff:aa7:4b00

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.167.75.0/3010.167.75.1 – 10.167.75.210.167.75.3
210.167.75.4/3010.167.75.5 – 10.167.75.610.167.75.7
310.167.75.8/3010.167.75.9 – 10.167.75.1010.167.75.11
410.167.75.12/3010.167.75.13 – 10.167.75.1410.167.75.15
510.167.75.16/3010.167.75.17 – 10.167.75.1810.167.75.19
610.167.75.20/3010.167.75.21 – 10.167.75.2210.167.75.23
710.167.75.24/3010.167.75.25 – 10.167.75.2610.167.75.27
810.167.75.28/3010.167.75.29 – 10.167.75.3010.167.75.31
910.167.75.32/3010.167.75.33 – 10.167.75.3410.167.75.35
1010.167.75.36/3010.167.75.37 – 10.167.75.3810.167.75.39
1110.167.75.40/3010.167.75.41 – 10.167.75.4210.167.75.43
1210.167.75.44/3010.167.75.45 – 10.167.75.4610.167.75.47
1310.167.75.48/3010.167.75.49 – 10.167.75.5010.167.75.51
1410.167.75.52/3010.167.75.53 – 10.167.75.5410.167.75.55
1510.167.75.56/3010.167.75.57 – 10.167.75.5810.167.75.59
1610.167.75.60/3010.167.75.61 – 10.167.75.6210.167.75.63
1710.167.75.64/3010.167.75.65 – 10.167.75.6610.167.75.67
1810.167.75.68/3010.167.75.69 – 10.167.75.7010.167.75.71
1910.167.75.72/3010.167.75.73 – 10.167.75.7410.167.75.75
2010.167.75.76/3010.167.75.77 – 10.167.75.7810.167.75.79
2110.167.75.80/3010.167.75.81 – 10.167.75.8210.167.75.83
2210.167.75.84/3010.167.75.85 – 10.167.75.8610.167.75.87
2310.167.75.88/3010.167.75.89 – 10.167.75.9010.167.75.91
2410.167.75.92/3010.167.75.93 – 10.167.75.9410.167.75.95
2510.167.75.96/3010.167.75.97 – 10.167.75.9810.167.75.99
2610.167.75.100/3010.167.75.101 – 10.167.75.10210.167.75.103
2710.167.75.104/3010.167.75.105 – 10.167.75.10610.167.75.107
2810.167.75.108/3010.167.75.109 – 10.167.75.11010.167.75.111
2910.167.75.112/3010.167.75.113 – 10.167.75.11410.167.75.115
3010.167.75.116/3010.167.75.117 – 10.167.75.11810.167.75.119
3110.167.75.120/3010.167.75.121 – 10.167.75.12210.167.75.123
3210.167.75.124/3010.167.75.125 – 10.167.75.12610.167.75.127
3310.167.75.128/3010.167.75.129 – 10.167.75.13010.167.75.131
3410.167.75.132/3010.167.75.133 – 10.167.75.13410.167.75.135
3510.167.75.136/3010.167.75.137 – 10.167.75.13810.167.75.139
3610.167.75.140/3010.167.75.141 – 10.167.75.14210.167.75.143
3710.167.75.144/3010.167.75.145 – 10.167.75.14610.167.75.147
3810.167.75.148/3010.167.75.149 – 10.167.75.15010.167.75.151
3910.167.75.152/3010.167.75.153 – 10.167.75.15410.167.75.155
4010.167.75.156/3010.167.75.157 – 10.167.75.15810.167.75.159
4110.167.75.160/3010.167.75.161 – 10.167.75.16210.167.75.163
4210.167.75.164/3010.167.75.165 – 10.167.75.16610.167.75.167
4310.167.75.168/3010.167.75.169 – 10.167.75.17010.167.75.171
4410.167.75.172/3010.167.75.173 – 10.167.75.17410.167.75.175
4510.167.75.176/3010.167.75.177 – 10.167.75.17810.167.75.179
4610.167.75.180/3010.167.75.181 – 10.167.75.18210.167.75.183
4710.167.75.184/3010.167.75.185 – 10.167.75.18610.167.75.187
4810.167.75.188/3010.167.75.189 – 10.167.75.19010.167.75.191
4910.167.75.192/3010.167.75.193 – 10.167.75.19410.167.75.195
5010.167.75.196/3010.167.75.197 – 10.167.75.19810.167.75.199
5110.167.75.200/3010.167.75.201 – 10.167.75.20210.167.75.203
5210.167.75.204/3010.167.75.205 – 10.167.75.20610.167.75.207
5310.167.75.208/3010.167.75.209 – 10.167.75.21010.167.75.211
5410.167.75.212/3010.167.75.213 – 10.167.75.21410.167.75.215
5510.167.75.216/3010.167.75.217 – 10.167.75.21810.167.75.219
5610.167.75.220/3010.167.75.221 – 10.167.75.22210.167.75.223
5710.167.75.224/3010.167.75.225 – 10.167.75.22610.167.75.227
5810.167.75.228/3010.167.75.229 – 10.167.75.23010.167.75.231
5910.167.75.232/3010.167.75.233 – 10.167.75.23410.167.75.235
6010.167.75.236/3010.167.75.237 – 10.167.75.23810.167.75.239
6110.167.75.240/3010.167.75.241 – 10.167.75.24210.167.75.243
6210.167.75.244/3010.167.75.245 – 10.167.75.24610.167.75.247
6310.167.75.248/3010.167.75.249 – 10.167.75.25010.167.75.251
6410.167.75.252/3010.167.75.253 – 10.167.75.25410.167.75.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →