ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.167.64.0/18
network10.167.64.0/18
broadcast10.167.127.255
first host10.167.64.1
last host10.167.127.254
subnet mask255.255.192.0
wildcard0.0.63.255
addresses16,384
usable hosts16,382
classA
ipcalc 10.167.64.0/18
address00001010.10100111.01000000.00000000
subnet mask11111111.11111111.11000000.00000000
network00001010.10100111.01000000.00000000
broadcast00001010.10100111.01111111.11111111
green = network part, grey = host part
hex0x0aa74000
decimal178733056
reverse dns0.64.167.10.in-addr.arpa
ipv4-mapped::ffff:aa7:4000

/18 split into /24 · 64 subnets

close ×
#networkhost rangebroadcast
110.167.64.0/2410.167.64.1 – 10.167.64.25410.167.64.255
210.167.65.0/2410.167.65.1 – 10.167.65.25410.167.65.255
310.167.66.0/2410.167.66.1 – 10.167.66.25410.167.66.255
410.167.67.0/2410.167.67.1 – 10.167.67.25410.167.67.255
510.167.68.0/2410.167.68.1 – 10.167.68.25410.167.68.255
610.167.69.0/2410.167.69.1 – 10.167.69.25410.167.69.255
710.167.70.0/2410.167.70.1 – 10.167.70.25410.167.70.255
810.167.71.0/2410.167.71.1 – 10.167.71.25410.167.71.255
910.167.72.0/2410.167.72.1 – 10.167.72.25410.167.72.255
1010.167.73.0/2410.167.73.1 – 10.167.73.25410.167.73.255
1110.167.74.0/2410.167.74.1 – 10.167.74.25410.167.74.255
1210.167.75.0/2410.167.75.1 – 10.167.75.25410.167.75.255
1310.167.76.0/2410.167.76.1 – 10.167.76.25410.167.76.255
1410.167.77.0/2410.167.77.1 – 10.167.77.25410.167.77.255
1510.167.78.0/2410.167.78.1 – 10.167.78.25410.167.78.255
1610.167.79.0/2410.167.79.1 – 10.167.79.25410.167.79.255
1710.167.80.0/2410.167.80.1 – 10.167.80.25410.167.80.255
1810.167.81.0/2410.167.81.1 – 10.167.81.25410.167.81.255
1910.167.82.0/2410.167.82.1 – 10.167.82.25410.167.82.255
2010.167.83.0/2410.167.83.1 – 10.167.83.25410.167.83.255
2110.167.84.0/2410.167.84.1 – 10.167.84.25410.167.84.255
2210.167.85.0/2410.167.85.1 – 10.167.85.25410.167.85.255
2310.167.86.0/2410.167.86.1 – 10.167.86.25410.167.86.255
2410.167.87.0/2410.167.87.1 – 10.167.87.25410.167.87.255
2510.167.88.0/2410.167.88.1 – 10.167.88.25410.167.88.255
2610.167.89.0/2410.167.89.1 – 10.167.89.25410.167.89.255
2710.167.90.0/2410.167.90.1 – 10.167.90.25410.167.90.255
2810.167.91.0/2410.167.91.1 – 10.167.91.25410.167.91.255
2910.167.92.0/2410.167.92.1 – 10.167.92.25410.167.92.255
3010.167.93.0/2410.167.93.1 – 10.167.93.25410.167.93.255
3110.167.94.0/2410.167.94.1 – 10.167.94.25410.167.94.255
3210.167.95.0/2410.167.95.1 – 10.167.95.25410.167.95.255
3310.167.96.0/2410.167.96.1 – 10.167.96.25410.167.96.255
3410.167.97.0/2410.167.97.1 – 10.167.97.25410.167.97.255
3510.167.98.0/2410.167.98.1 – 10.167.98.25410.167.98.255
3610.167.99.0/2410.167.99.1 – 10.167.99.25410.167.99.255
3710.167.100.0/2410.167.100.1 – 10.167.100.25410.167.100.255
3810.167.101.0/2410.167.101.1 – 10.167.101.25410.167.101.255
3910.167.102.0/2410.167.102.1 – 10.167.102.25410.167.102.255
4010.167.103.0/2410.167.103.1 – 10.167.103.25410.167.103.255
4110.167.104.0/2410.167.104.1 – 10.167.104.25410.167.104.255
4210.167.105.0/2410.167.105.1 – 10.167.105.25410.167.105.255
4310.167.106.0/2410.167.106.1 – 10.167.106.25410.167.106.255
4410.167.107.0/2410.167.107.1 – 10.167.107.25410.167.107.255
4510.167.108.0/2410.167.108.1 – 10.167.108.25410.167.108.255
4610.167.109.0/2410.167.109.1 – 10.167.109.25410.167.109.255
4710.167.110.0/2410.167.110.1 – 10.167.110.25410.167.110.255
4810.167.111.0/2410.167.111.1 – 10.167.111.25410.167.111.255
4910.167.112.0/2410.167.112.1 – 10.167.112.25410.167.112.255
5010.167.113.0/2410.167.113.1 – 10.167.113.25410.167.113.255
5110.167.114.0/2410.167.114.1 – 10.167.114.25410.167.114.255
5210.167.115.0/2410.167.115.1 – 10.167.115.25410.167.115.255
5310.167.116.0/2410.167.116.1 – 10.167.116.25410.167.116.255
5410.167.117.0/2410.167.117.1 – 10.167.117.25410.167.117.255
5510.167.118.0/2410.167.118.1 – 10.167.118.25410.167.118.255
5610.167.119.0/2410.167.119.1 – 10.167.119.25410.167.119.255
5710.167.120.0/2410.167.120.1 – 10.167.120.25410.167.120.255
5810.167.121.0/2410.167.121.1 – 10.167.121.25410.167.121.255
5910.167.122.0/2410.167.122.1 – 10.167.122.25410.167.122.255
6010.167.123.0/2410.167.123.1 – 10.167.123.25410.167.123.255
6110.167.124.0/2410.167.124.1 – 10.167.124.25410.167.124.255
6210.167.125.0/2410.167.125.1 – 10.167.125.25410.167.125.255
6310.167.126.0/2410.167.126.1 – 10.167.126.25410.167.126.255
6410.167.127.0/2410.167.127.1 – 10.167.127.25410.167.127.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /18
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,3821
/19255.255.224.08,1928,1902 split →
/20255.255.240.04,0964,0944 split →
/21255.255.248.02,0482,0468 split →
/22255.255.252.01,0241,02216 split →
/23255.255.254.051251032 split →
/24255.255.255.025625464 split →
/25255.255.255.128128126128 split →
/26255.255.255.1926462256 split →
/27255.255.255.2243230512 split →
/28255.255.255.24016141,024 split →
/29255.255.255.248862,048 split →
/30255.255.255.252424,096 split →
/31255.255.255.254228,192 split →
/32255.255.255.2551116,384 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →