ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.167.62.128/26
network10.167.62.128/26
broadcast10.167.62.191
first host10.167.62.129
last host10.167.62.190
subnet mask255.255.255.192
wildcard0.0.0.63
addresses64
usable hosts62
classA
ipcalc 10.167.62.128/26
address00001010.10100111.00111110.10000000
subnet mask11111111.11111111.11111111.11000000
network00001010.10100111.00111110.10000000
broadcast00001010.10100111.00111110.10111111
green = network part, grey = host part
hex0x0aa73e80
decimal178732672
reverse dns128.62.167.10.in-addr.arpa
ipv4-mapped::ffff:aa7:3e80

/26 split into /31 · 32 subnets

close ×
#networkhost rangebroadcast
110.167.62.128/3110.167.62.128 – 10.167.62.12910.167.62.129
210.167.62.130/3110.167.62.130 – 10.167.62.13110.167.62.131
310.167.62.132/3110.167.62.132 – 10.167.62.13310.167.62.133
410.167.62.134/3110.167.62.134 – 10.167.62.13510.167.62.135
510.167.62.136/3110.167.62.136 – 10.167.62.13710.167.62.137
610.167.62.138/3110.167.62.138 – 10.167.62.13910.167.62.139
710.167.62.140/3110.167.62.140 – 10.167.62.14110.167.62.141
810.167.62.142/3110.167.62.142 – 10.167.62.14310.167.62.143
910.167.62.144/3110.167.62.144 – 10.167.62.14510.167.62.145
1010.167.62.146/3110.167.62.146 – 10.167.62.14710.167.62.147
1110.167.62.148/3110.167.62.148 – 10.167.62.14910.167.62.149
1210.167.62.150/3110.167.62.150 – 10.167.62.15110.167.62.151
1310.167.62.152/3110.167.62.152 – 10.167.62.15310.167.62.153
1410.167.62.154/3110.167.62.154 – 10.167.62.15510.167.62.155
1510.167.62.156/3110.167.62.156 – 10.167.62.15710.167.62.157
1610.167.62.158/3110.167.62.158 – 10.167.62.15910.167.62.159
1710.167.62.160/3110.167.62.160 – 10.167.62.16110.167.62.161
1810.167.62.162/3110.167.62.162 – 10.167.62.16310.167.62.163
1910.167.62.164/3110.167.62.164 – 10.167.62.16510.167.62.165
2010.167.62.166/3110.167.62.166 – 10.167.62.16710.167.62.167
2110.167.62.168/3110.167.62.168 – 10.167.62.16910.167.62.169
2210.167.62.170/3110.167.62.170 – 10.167.62.17110.167.62.171
2310.167.62.172/3110.167.62.172 – 10.167.62.17310.167.62.173
2410.167.62.174/3110.167.62.174 – 10.167.62.17510.167.62.175
2510.167.62.176/3110.167.62.176 – 10.167.62.17710.167.62.177
2610.167.62.178/3110.167.62.178 – 10.167.62.17910.167.62.179
2710.167.62.180/3110.167.62.180 – 10.167.62.18110.167.62.181
2810.167.62.182/3110.167.62.182 – 10.167.62.18310.167.62.183
2910.167.62.184/3110.167.62.184 – 10.167.62.18510.167.62.185
3010.167.62.186/3110.167.62.186 – 10.167.62.18710.167.62.187
3110.167.62.188/3110.167.62.188 – 10.167.62.18910.167.62.189
3210.167.62.190/3110.167.62.190 – 10.167.62.19110.167.62.191
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /26
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.19264621
/27255.255.255.22432302 split →
/28255.255.255.24016144 split →
/29255.255.255.248868 split →
/30255.255.255.2524216 split →
/31255.255.255.2542232 split →
/32255.255.255.2551164 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →