ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
private IP (RFC 1918)10.167.54.0/23
network10.167.54.0/23
broadcast10.167.55.255
first host10.167.54.1
last host10.167.55.254
subnet mask255.255.254.0
wildcard0.0.1.255
addresses512
usable hosts510
classA
ipcalc 10.167.54.0/23
address00001010.10100111.00110110.00000000
subnet mask11111111.11111111.11111110.00000000
network00001010.10100111.00110110.00000000
broadcast00001010.10100111.00110111.11111111
green = network part, grey = host part
hex0x0aa73600
decimal178730496
reverse dns0.54.167.10.in-addr.arpa
ipv4-mapped::ffff:aa7:3600

/23 split into /29 · 64 subnets

close ×
#networkhost rangebroadcast
110.167.54.0/2910.167.54.1 – 10.167.54.610.167.54.7
210.167.54.8/2910.167.54.9 – 10.167.54.1410.167.54.15
310.167.54.16/2910.167.54.17 – 10.167.54.2210.167.54.23
410.167.54.24/2910.167.54.25 – 10.167.54.3010.167.54.31
510.167.54.32/2910.167.54.33 – 10.167.54.3810.167.54.39
610.167.54.40/2910.167.54.41 – 10.167.54.4610.167.54.47
710.167.54.48/2910.167.54.49 – 10.167.54.5410.167.54.55
810.167.54.56/2910.167.54.57 – 10.167.54.6210.167.54.63
910.167.54.64/2910.167.54.65 – 10.167.54.7010.167.54.71
1010.167.54.72/2910.167.54.73 – 10.167.54.7810.167.54.79
1110.167.54.80/2910.167.54.81 – 10.167.54.8610.167.54.87
1210.167.54.88/2910.167.54.89 – 10.167.54.9410.167.54.95
1310.167.54.96/2910.167.54.97 – 10.167.54.10210.167.54.103
1410.167.54.104/2910.167.54.105 – 10.167.54.11010.167.54.111
1510.167.54.112/2910.167.54.113 – 10.167.54.11810.167.54.119
1610.167.54.120/2910.167.54.121 – 10.167.54.12610.167.54.127
1710.167.54.128/2910.167.54.129 – 10.167.54.13410.167.54.135
1810.167.54.136/2910.167.54.137 – 10.167.54.14210.167.54.143
1910.167.54.144/2910.167.54.145 – 10.167.54.15010.167.54.151
2010.167.54.152/2910.167.54.153 – 10.167.54.15810.167.54.159
2110.167.54.160/2910.167.54.161 – 10.167.54.16610.167.54.167
2210.167.54.168/2910.167.54.169 – 10.167.54.17410.167.54.175
2310.167.54.176/2910.167.54.177 – 10.167.54.18210.167.54.183
2410.167.54.184/2910.167.54.185 – 10.167.54.19010.167.54.191
2510.167.54.192/2910.167.54.193 – 10.167.54.19810.167.54.199
2610.167.54.200/2910.167.54.201 – 10.167.54.20610.167.54.207
2710.167.54.208/2910.167.54.209 – 10.167.54.21410.167.54.215
2810.167.54.216/2910.167.54.217 – 10.167.54.22210.167.54.223
2910.167.54.224/2910.167.54.225 – 10.167.54.23010.167.54.231
3010.167.54.232/2910.167.54.233 – 10.167.54.23810.167.54.239
3110.167.54.240/2910.167.54.241 – 10.167.54.24610.167.54.247
3210.167.54.248/2910.167.54.249 – 10.167.54.25410.167.54.255
3310.167.55.0/2910.167.55.1 – 10.167.55.610.167.55.7
3410.167.55.8/2910.167.55.9 – 10.167.55.1410.167.55.15
3510.167.55.16/2910.167.55.17 – 10.167.55.2210.167.55.23
3610.167.55.24/2910.167.55.25 – 10.167.55.3010.167.55.31
3710.167.55.32/2910.167.55.33 – 10.167.55.3810.167.55.39
3810.167.55.40/2910.167.55.41 – 10.167.55.4610.167.55.47
3910.167.55.48/2910.167.55.49 – 10.167.55.5410.167.55.55
4010.167.55.56/2910.167.55.57 – 10.167.55.6210.167.55.63
4110.167.55.64/2910.167.55.65 – 10.167.55.7010.167.55.71
4210.167.55.72/2910.167.55.73 – 10.167.55.7810.167.55.79
4310.167.55.80/2910.167.55.81 – 10.167.55.8610.167.55.87
4410.167.55.88/2910.167.55.89 – 10.167.55.9410.167.55.95
4510.167.55.96/2910.167.55.97 – 10.167.55.10210.167.55.103
4610.167.55.104/2910.167.55.105 – 10.167.55.11010.167.55.111
4710.167.55.112/2910.167.55.113 – 10.167.55.11810.167.55.119
4810.167.55.120/2910.167.55.121 – 10.167.55.12610.167.55.127
4910.167.55.128/2910.167.55.129 – 10.167.55.13410.167.55.135
5010.167.55.136/2910.167.55.137 – 10.167.55.14210.167.55.143
5110.167.55.144/2910.167.55.145 – 10.167.55.15010.167.55.151
5210.167.55.152/2910.167.55.153 – 10.167.55.15810.167.55.159
5310.167.55.160/2910.167.55.161 – 10.167.55.16610.167.55.167
5410.167.55.168/2910.167.55.169 – 10.167.55.17410.167.55.175
5510.167.55.176/2910.167.55.177 – 10.167.55.18210.167.55.183
5610.167.55.184/2910.167.55.185 – 10.167.55.19010.167.55.191
5710.167.55.192/2910.167.55.193 – 10.167.55.19810.167.55.199
5810.167.55.200/2910.167.55.201 – 10.167.55.20610.167.55.207
5910.167.55.208/2910.167.55.209 – 10.167.55.21410.167.55.215
6010.167.55.216/2910.167.55.217 – 10.167.55.22210.167.55.223
6110.167.55.224/2910.167.55.225 – 10.167.55.23010.167.55.231
6210.167.55.232/2910.167.55.233 – 10.167.55.23810.167.55.239
6310.167.55.240/2910.167.55.241 – 10.167.55.24610.167.55.247
6410.167.55.248/2910.167.55.249 – 10.167.55.25410.167.55.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /23
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.05125101
/24255.255.255.02562542 split →
/25255.255.255.1281281264 split →
/26255.255.255.19264628 split →
/27255.255.255.224323016 split →
/28255.255.255.240161432 split →
/29255.255.255.2488664 split →
/30255.255.255.25242128 split →
/31255.255.255.25422256 split →
/32255.255.255.25511512 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →