ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.167.52.128/25
network10.167.52.128/25
broadcast10.167.52.255
first host10.167.52.129
last host10.167.52.254
subnet mask255.255.255.128
wildcard0.0.0.127
addresses128
usable hosts126
classA
ipcalc 10.167.52.128/25
address00001010.10100111.00110100.10000000
subnet mask11111111.11111111.11111111.10000000
network00001010.10100111.00110100.10000000
broadcast00001010.10100111.00110100.11111111
green = network part, grey = host part
hex0x0aa73480
decimal178730112
reverse dns128.52.167.10.in-addr.arpa
ipv4-mapped::ffff:aa7:3480

/25 split into /29 · 16 subnets

close ×
#networkhost rangebroadcast
110.167.52.128/2910.167.52.129 – 10.167.52.13410.167.52.135
210.167.52.136/2910.167.52.137 – 10.167.52.14210.167.52.143
310.167.52.144/2910.167.52.145 – 10.167.52.15010.167.52.151
410.167.52.152/2910.167.52.153 – 10.167.52.15810.167.52.159
510.167.52.160/2910.167.52.161 – 10.167.52.16610.167.52.167
610.167.52.168/2910.167.52.169 – 10.167.52.17410.167.52.175
710.167.52.176/2910.167.52.177 – 10.167.52.18210.167.52.183
810.167.52.184/2910.167.52.185 – 10.167.52.19010.167.52.191
910.167.52.192/2910.167.52.193 – 10.167.52.19810.167.52.199
1010.167.52.200/2910.167.52.201 – 10.167.52.20610.167.52.207
1110.167.52.208/2910.167.52.209 – 10.167.52.21410.167.52.215
1210.167.52.216/2910.167.52.217 – 10.167.52.22210.167.52.223
1310.167.52.224/2910.167.52.225 – 10.167.52.23010.167.52.231
1410.167.52.232/2910.167.52.233 – 10.167.52.23810.167.52.239
1510.167.52.240/2910.167.52.241 – 10.167.52.24610.167.52.247
1610.167.52.248/2910.167.52.249 – 10.167.52.25410.167.52.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /25
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.1281281261
/26255.255.255.19264622 split →
/27255.255.255.22432304 split →
/28255.255.255.24016148 split →
/29255.255.255.2488616 split →
/30255.255.255.2524232 split →
/31255.255.255.2542264 split →
/32255.255.255.25511128 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →