ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.167.52.0/23
network10.167.52.0/23
broadcast10.167.53.255
first host10.167.52.1
last host10.167.53.254
subnet mask255.255.254.0
wildcard0.0.1.255
addresses512
usable hosts510
classA
ipcalc 10.167.52.0/23
address00001010.10100111.00110100.00000000
subnet mask11111111.11111111.11111110.00000000
network00001010.10100111.00110100.00000000
broadcast00001010.10100111.00110101.11111111
green = network part, grey = host part
hex0x0aa73400
decimal178729984
reverse dns0.52.167.10.in-addr.arpa
ipv4-mapped::ffff:aa7:3400

/23 split into /28 · 32 subnets

close ×
#networkhost rangebroadcast
110.167.52.0/2810.167.52.1 – 10.167.52.1410.167.52.15
210.167.52.16/2810.167.52.17 – 10.167.52.3010.167.52.31
310.167.52.32/2810.167.52.33 – 10.167.52.4610.167.52.47
410.167.52.48/2810.167.52.49 – 10.167.52.6210.167.52.63
510.167.52.64/2810.167.52.65 – 10.167.52.7810.167.52.79
610.167.52.80/2810.167.52.81 – 10.167.52.9410.167.52.95
710.167.52.96/2810.167.52.97 – 10.167.52.11010.167.52.111
810.167.52.112/2810.167.52.113 – 10.167.52.12610.167.52.127
910.167.52.128/2810.167.52.129 – 10.167.52.14210.167.52.143
1010.167.52.144/2810.167.52.145 – 10.167.52.15810.167.52.159
1110.167.52.160/2810.167.52.161 – 10.167.52.17410.167.52.175
1210.167.52.176/2810.167.52.177 – 10.167.52.19010.167.52.191
1310.167.52.192/2810.167.52.193 – 10.167.52.20610.167.52.207
1410.167.52.208/2810.167.52.209 – 10.167.52.22210.167.52.223
1510.167.52.224/2810.167.52.225 – 10.167.52.23810.167.52.239
1610.167.52.240/2810.167.52.241 – 10.167.52.25410.167.52.255
1710.167.53.0/2810.167.53.1 – 10.167.53.1410.167.53.15
1810.167.53.16/2810.167.53.17 – 10.167.53.3010.167.53.31
1910.167.53.32/2810.167.53.33 – 10.167.53.4610.167.53.47
2010.167.53.48/2810.167.53.49 – 10.167.53.6210.167.53.63
2110.167.53.64/2810.167.53.65 – 10.167.53.7810.167.53.79
2210.167.53.80/2810.167.53.81 – 10.167.53.9410.167.53.95
2310.167.53.96/2810.167.53.97 – 10.167.53.11010.167.53.111
2410.167.53.112/2810.167.53.113 – 10.167.53.12610.167.53.127
2510.167.53.128/2810.167.53.129 – 10.167.53.14210.167.53.143
2610.167.53.144/2810.167.53.145 – 10.167.53.15810.167.53.159
2710.167.53.160/2810.167.53.161 – 10.167.53.17410.167.53.175
2810.167.53.176/2810.167.53.177 – 10.167.53.19010.167.53.191
2910.167.53.192/2810.167.53.193 – 10.167.53.20610.167.53.207
3010.167.53.208/2810.167.53.209 – 10.167.53.22210.167.53.223
3110.167.53.224/2810.167.53.225 – 10.167.53.23810.167.53.239
3210.167.53.240/2810.167.53.241 – 10.167.53.25410.167.53.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /23
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.05125101
/24255.255.255.02562542 split →
/25255.255.255.1281281264 split →
/26255.255.255.19264628 split →
/27255.255.255.224323016 split →
/28255.255.255.240161432 split →
/29255.255.255.2488664 split →
/30255.255.255.25242128 split →
/31255.255.255.25422256 split →
/32255.255.255.25511512 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →