ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.167.50.0/23
network10.167.50.0/23
broadcast10.167.51.255
first host10.167.50.1
last host10.167.51.254
subnet mask255.255.254.0
wildcard0.0.1.255
addresses512
usable hosts510
classA
ipcalc 10.167.50.0/23
address00001010.10100111.00110010.00000000
subnet mask11111111.11111111.11111110.00000000
network00001010.10100111.00110010.00000000
broadcast00001010.10100111.00110011.11111111
green = network part, grey = host part
hex0x0aa73200
decimal178729472
reverse dns0.50.167.10.in-addr.arpa
ipv4-mapped::ffff:aa7:3200

/23 split into /28 · 32 subnets

close ×
#networkhost rangebroadcast
110.167.50.0/2810.167.50.1 – 10.167.50.1410.167.50.15
210.167.50.16/2810.167.50.17 – 10.167.50.3010.167.50.31
310.167.50.32/2810.167.50.33 – 10.167.50.4610.167.50.47
410.167.50.48/2810.167.50.49 – 10.167.50.6210.167.50.63
510.167.50.64/2810.167.50.65 – 10.167.50.7810.167.50.79
610.167.50.80/2810.167.50.81 – 10.167.50.9410.167.50.95
710.167.50.96/2810.167.50.97 – 10.167.50.11010.167.50.111
810.167.50.112/2810.167.50.113 – 10.167.50.12610.167.50.127
910.167.50.128/2810.167.50.129 – 10.167.50.14210.167.50.143
1010.167.50.144/2810.167.50.145 – 10.167.50.15810.167.50.159
1110.167.50.160/2810.167.50.161 – 10.167.50.17410.167.50.175
1210.167.50.176/2810.167.50.177 – 10.167.50.19010.167.50.191
1310.167.50.192/2810.167.50.193 – 10.167.50.20610.167.50.207
1410.167.50.208/2810.167.50.209 – 10.167.50.22210.167.50.223
1510.167.50.224/2810.167.50.225 – 10.167.50.23810.167.50.239
1610.167.50.240/2810.167.50.241 – 10.167.50.25410.167.50.255
1710.167.51.0/2810.167.51.1 – 10.167.51.1410.167.51.15
1810.167.51.16/2810.167.51.17 – 10.167.51.3010.167.51.31
1910.167.51.32/2810.167.51.33 – 10.167.51.4610.167.51.47
2010.167.51.48/2810.167.51.49 – 10.167.51.6210.167.51.63
2110.167.51.64/2810.167.51.65 – 10.167.51.7810.167.51.79
2210.167.51.80/2810.167.51.81 – 10.167.51.9410.167.51.95
2310.167.51.96/2810.167.51.97 – 10.167.51.11010.167.51.111
2410.167.51.112/2810.167.51.113 – 10.167.51.12610.167.51.127
2510.167.51.128/2810.167.51.129 – 10.167.51.14210.167.51.143
2610.167.51.144/2810.167.51.145 – 10.167.51.15810.167.51.159
2710.167.51.160/2810.167.51.161 – 10.167.51.17410.167.51.175
2810.167.51.176/2810.167.51.177 – 10.167.51.19010.167.51.191
2910.167.51.192/2810.167.51.193 – 10.167.51.20610.167.51.207
3010.167.51.208/2810.167.51.209 – 10.167.51.22210.167.51.223
3110.167.51.224/2810.167.51.225 – 10.167.51.23810.167.51.239
3210.167.51.240/2810.167.51.241 – 10.167.51.25410.167.51.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /23
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.05125101
/24255.255.255.02562542 split →
/25255.255.255.1281281264 split →
/26255.255.255.19264628 split →
/27255.255.255.224323016 split →
/28255.255.255.240161432 split →
/29255.255.255.2488664 split →
/30255.255.255.25242128 split →
/31255.255.255.25422256 split →
/32255.255.255.25511512 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →