ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
private IP (RFC 1918)10.167.48.0/21
network10.167.48.0/21
broadcast10.167.55.255
first host10.167.48.1
last host10.167.55.254
subnet mask255.255.248.0
wildcard0.0.7.255
addresses2,048
usable hosts2,046
classA
ipcalc 10.167.48.0/21
address00001010.10100111.00110000.00000000
subnet mask11111111.11111111.11111000.00000000
network00001010.10100111.00110000.00000000
broadcast00001010.10100111.00110111.11111111
green = network part, grey = host part
hex0x0aa73000
decimal178728960
reverse dns0.48.167.10.in-addr.arpa
ipv4-mapped::ffff:aa7:3000

/21 split into /27 · 64 subnets

close ×
#networkhost rangebroadcast
110.167.48.0/2710.167.48.1 – 10.167.48.3010.167.48.31
210.167.48.32/2710.167.48.33 – 10.167.48.6210.167.48.63
310.167.48.64/2710.167.48.65 – 10.167.48.9410.167.48.95
410.167.48.96/2710.167.48.97 – 10.167.48.12610.167.48.127
510.167.48.128/2710.167.48.129 – 10.167.48.15810.167.48.159
610.167.48.160/2710.167.48.161 – 10.167.48.19010.167.48.191
710.167.48.192/2710.167.48.193 – 10.167.48.22210.167.48.223
810.167.48.224/2710.167.48.225 – 10.167.48.25410.167.48.255
910.167.49.0/2710.167.49.1 – 10.167.49.3010.167.49.31
1010.167.49.32/2710.167.49.33 – 10.167.49.6210.167.49.63
1110.167.49.64/2710.167.49.65 – 10.167.49.9410.167.49.95
1210.167.49.96/2710.167.49.97 – 10.167.49.12610.167.49.127
1310.167.49.128/2710.167.49.129 – 10.167.49.15810.167.49.159
1410.167.49.160/2710.167.49.161 – 10.167.49.19010.167.49.191
1510.167.49.192/2710.167.49.193 – 10.167.49.22210.167.49.223
1610.167.49.224/2710.167.49.225 – 10.167.49.25410.167.49.255
1710.167.50.0/2710.167.50.1 – 10.167.50.3010.167.50.31
1810.167.50.32/2710.167.50.33 – 10.167.50.6210.167.50.63
1910.167.50.64/2710.167.50.65 – 10.167.50.9410.167.50.95
2010.167.50.96/2710.167.50.97 – 10.167.50.12610.167.50.127
2110.167.50.128/2710.167.50.129 – 10.167.50.15810.167.50.159
2210.167.50.160/2710.167.50.161 – 10.167.50.19010.167.50.191
2310.167.50.192/2710.167.50.193 – 10.167.50.22210.167.50.223
2410.167.50.224/2710.167.50.225 – 10.167.50.25410.167.50.255
2510.167.51.0/2710.167.51.1 – 10.167.51.3010.167.51.31
2610.167.51.32/2710.167.51.33 – 10.167.51.6210.167.51.63
2710.167.51.64/2710.167.51.65 – 10.167.51.9410.167.51.95
2810.167.51.96/2710.167.51.97 – 10.167.51.12610.167.51.127
2910.167.51.128/2710.167.51.129 – 10.167.51.15810.167.51.159
3010.167.51.160/2710.167.51.161 – 10.167.51.19010.167.51.191
3110.167.51.192/2710.167.51.193 – 10.167.51.22210.167.51.223
3210.167.51.224/2710.167.51.225 – 10.167.51.25410.167.51.255
3310.167.52.0/2710.167.52.1 – 10.167.52.3010.167.52.31
3410.167.52.32/2710.167.52.33 – 10.167.52.6210.167.52.63
3510.167.52.64/2710.167.52.65 – 10.167.52.9410.167.52.95
3610.167.52.96/2710.167.52.97 – 10.167.52.12610.167.52.127
3710.167.52.128/2710.167.52.129 – 10.167.52.15810.167.52.159
3810.167.52.160/2710.167.52.161 – 10.167.52.19010.167.52.191
3910.167.52.192/2710.167.52.193 – 10.167.52.22210.167.52.223
4010.167.52.224/2710.167.52.225 – 10.167.52.25410.167.52.255
4110.167.53.0/2710.167.53.1 – 10.167.53.3010.167.53.31
4210.167.53.32/2710.167.53.33 – 10.167.53.6210.167.53.63
4310.167.53.64/2710.167.53.65 – 10.167.53.9410.167.53.95
4410.167.53.96/2710.167.53.97 – 10.167.53.12610.167.53.127
4510.167.53.128/2710.167.53.129 – 10.167.53.15810.167.53.159
4610.167.53.160/2710.167.53.161 – 10.167.53.19010.167.53.191
4710.167.53.192/2710.167.53.193 – 10.167.53.22210.167.53.223
4810.167.53.224/2710.167.53.225 – 10.167.53.25410.167.53.255
4910.167.54.0/2710.167.54.1 – 10.167.54.3010.167.54.31
5010.167.54.32/2710.167.54.33 – 10.167.54.6210.167.54.63
5110.167.54.64/2710.167.54.65 – 10.167.54.9410.167.54.95
5210.167.54.96/2710.167.54.97 – 10.167.54.12610.167.54.127
5310.167.54.128/2710.167.54.129 – 10.167.54.15810.167.54.159
5410.167.54.160/2710.167.54.161 – 10.167.54.19010.167.54.191
5510.167.54.192/2710.167.54.193 – 10.167.54.22210.167.54.223
5610.167.54.224/2710.167.54.225 – 10.167.54.25410.167.54.255
5710.167.55.0/2710.167.55.1 – 10.167.55.3010.167.55.31
5810.167.55.32/2710.167.55.33 – 10.167.55.6210.167.55.63
5910.167.55.64/2710.167.55.65 – 10.167.55.9410.167.55.95
6010.167.55.96/2710.167.55.97 – 10.167.55.12610.167.55.127
6110.167.55.128/2710.167.55.129 – 10.167.55.15810.167.55.159
6210.167.55.160/2710.167.55.161 – 10.167.55.19010.167.55.191
6310.167.55.192/2710.167.55.193 – 10.167.55.22210.167.55.223
6410.167.55.224/2710.167.55.225 – 10.167.55.25410.167.55.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /21
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,0461
/22255.255.252.01,0241,0222 split →
/23255.255.254.05125104 split →
/24255.255.255.02562548 split →
/25255.255.255.12812812616 split →
/26255.255.255.192646232 split →
/27255.255.255.224323064 split →
/28255.255.255.2401614128 split →
/29255.255.255.24886256 split →
/30255.255.255.25242512 split →
/31255.255.255.254221,024 split →
/32255.255.255.255112,048 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →