ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.167.48.0/20
network10.167.48.0/20
broadcast10.167.63.255
first host10.167.48.1
last host10.167.63.254
subnet mask255.255.240.0
wildcard0.0.15.255
addresses4,096
usable hosts4,094
classA
ipcalc 10.167.48.0/20
address00001010.10100111.00110000.00000000
subnet mask11111111.11111111.11110000.00000000
network00001010.10100111.00110000.00000000
broadcast00001010.10100111.00111111.11111111
green = network part, grey = host part
hex0x0aa73000
decimal178728960
reverse dns0.48.167.10.in-addr.arpa
ipv4-mapped::ffff:aa7:3000

/20 split into /25 · 32 subnets

close ×
#networkhost rangebroadcast
110.167.48.0/2510.167.48.1 – 10.167.48.12610.167.48.127
210.167.48.128/2510.167.48.129 – 10.167.48.25410.167.48.255
310.167.49.0/2510.167.49.1 – 10.167.49.12610.167.49.127
410.167.49.128/2510.167.49.129 – 10.167.49.25410.167.49.255
510.167.50.0/2510.167.50.1 – 10.167.50.12610.167.50.127
610.167.50.128/2510.167.50.129 – 10.167.50.25410.167.50.255
710.167.51.0/2510.167.51.1 – 10.167.51.12610.167.51.127
810.167.51.128/2510.167.51.129 – 10.167.51.25410.167.51.255
910.167.52.0/2510.167.52.1 – 10.167.52.12610.167.52.127
1010.167.52.128/2510.167.52.129 – 10.167.52.25410.167.52.255
1110.167.53.0/2510.167.53.1 – 10.167.53.12610.167.53.127
1210.167.53.128/2510.167.53.129 – 10.167.53.25410.167.53.255
1310.167.54.0/2510.167.54.1 – 10.167.54.12610.167.54.127
1410.167.54.128/2510.167.54.129 – 10.167.54.25410.167.54.255
1510.167.55.0/2510.167.55.1 – 10.167.55.12610.167.55.127
1610.167.55.128/2510.167.55.129 – 10.167.55.25410.167.55.255
1710.167.56.0/2510.167.56.1 – 10.167.56.12610.167.56.127
1810.167.56.128/2510.167.56.129 – 10.167.56.25410.167.56.255
1910.167.57.0/2510.167.57.1 – 10.167.57.12610.167.57.127
2010.167.57.128/2510.167.57.129 – 10.167.57.25410.167.57.255
2110.167.58.0/2510.167.58.1 – 10.167.58.12610.167.58.127
2210.167.58.128/2510.167.58.129 – 10.167.58.25410.167.58.255
2310.167.59.0/2510.167.59.1 – 10.167.59.12610.167.59.127
2410.167.59.128/2510.167.59.129 – 10.167.59.25410.167.59.255
2510.167.60.0/2510.167.60.1 – 10.167.60.12610.167.60.127
2610.167.60.128/2510.167.60.129 – 10.167.60.25410.167.60.255
2710.167.61.0/2510.167.61.1 – 10.167.61.12610.167.61.127
2810.167.61.128/2510.167.61.129 – 10.167.61.25410.167.61.255
2910.167.62.0/2510.167.62.1 – 10.167.62.12610.167.62.127
3010.167.62.128/2510.167.62.129 – 10.167.62.25410.167.62.255
3110.167.63.0/2510.167.63.1 – 10.167.63.12610.167.63.127
3210.167.63.128/2510.167.63.129 – 10.167.63.25410.167.63.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /20
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,0941
/21255.255.248.02,0482,0462 split →
/22255.255.252.01,0241,0224 split →
/23255.255.254.05125108 split →
/24255.255.255.025625416 split →
/25255.255.255.12812812632 split →
/26255.255.255.192646264 split →
/27255.255.255.2243230128 split →
/28255.255.255.2401614256 split →
/29255.255.255.24886512 split →
/30255.255.255.252421,024 split →
/31255.255.255.254222,048 split →
/32255.255.255.255114,096 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →