ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.167.40.128/25
network10.167.40.128/25
broadcast10.167.40.255
first host10.167.40.129
last host10.167.40.254
subnet mask255.255.255.128
wildcard0.0.0.127
addresses128
usable hosts126
classA
ipcalc 10.167.40.128/25
address00001010.10100111.00101000.10000000
subnet mask11111111.11111111.11111111.10000000
network00001010.10100111.00101000.10000000
broadcast00001010.10100111.00101000.11111111
green = network part, grey = host part
hex0x0aa72880
decimal178727040
reverse dns128.40.167.10.in-addr.arpa
ipv4-mapped::ffff:aa7:2880

/25 split into /30 · 32 subnets

close ×
#networkhost rangebroadcast
110.167.40.128/3010.167.40.129 – 10.167.40.13010.167.40.131
210.167.40.132/3010.167.40.133 – 10.167.40.13410.167.40.135
310.167.40.136/3010.167.40.137 – 10.167.40.13810.167.40.139
410.167.40.140/3010.167.40.141 – 10.167.40.14210.167.40.143
510.167.40.144/3010.167.40.145 – 10.167.40.14610.167.40.147
610.167.40.148/3010.167.40.149 – 10.167.40.15010.167.40.151
710.167.40.152/3010.167.40.153 – 10.167.40.15410.167.40.155
810.167.40.156/3010.167.40.157 – 10.167.40.15810.167.40.159
910.167.40.160/3010.167.40.161 – 10.167.40.16210.167.40.163
1010.167.40.164/3010.167.40.165 – 10.167.40.16610.167.40.167
1110.167.40.168/3010.167.40.169 – 10.167.40.17010.167.40.171
1210.167.40.172/3010.167.40.173 – 10.167.40.17410.167.40.175
1310.167.40.176/3010.167.40.177 – 10.167.40.17810.167.40.179
1410.167.40.180/3010.167.40.181 – 10.167.40.18210.167.40.183
1510.167.40.184/3010.167.40.185 – 10.167.40.18610.167.40.187
1610.167.40.188/3010.167.40.189 – 10.167.40.19010.167.40.191
1710.167.40.192/3010.167.40.193 – 10.167.40.19410.167.40.195
1810.167.40.196/3010.167.40.197 – 10.167.40.19810.167.40.199
1910.167.40.200/3010.167.40.201 – 10.167.40.20210.167.40.203
2010.167.40.204/3010.167.40.205 – 10.167.40.20610.167.40.207
2110.167.40.208/3010.167.40.209 – 10.167.40.21010.167.40.211
2210.167.40.212/3010.167.40.213 – 10.167.40.21410.167.40.215
2310.167.40.216/3010.167.40.217 – 10.167.40.21810.167.40.219
2410.167.40.220/3010.167.40.221 – 10.167.40.22210.167.40.223
2510.167.40.224/3010.167.40.225 – 10.167.40.22610.167.40.227
2610.167.40.228/3010.167.40.229 – 10.167.40.23010.167.40.231
2710.167.40.232/3010.167.40.233 – 10.167.40.23410.167.40.235
2810.167.40.236/3010.167.40.237 – 10.167.40.23810.167.40.239
2910.167.40.240/3010.167.40.241 – 10.167.40.24210.167.40.243
3010.167.40.244/3010.167.40.245 – 10.167.40.24610.167.40.247
3110.167.40.248/3010.167.40.249 – 10.167.40.25010.167.40.251
3210.167.40.252/3010.167.40.253 – 10.167.40.25410.167.40.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /25
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.1281281261
/26255.255.255.19264622 split →
/27255.255.255.22432304 split →
/28255.255.255.24016148 split →
/29255.255.255.2488616 split →
/30255.255.255.2524232 split →
/31255.255.255.2542264 split →
/32255.255.255.25511128 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →