ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
private IP (RFC 1918)10.167.32.0/21
network10.167.32.0/21
broadcast10.167.39.255
first host10.167.32.1
last host10.167.39.254
subnet mask255.255.248.0
wildcard0.0.7.255
addresses2,048
usable hosts2,046
classA
ipcalc 10.167.32.0/21
address00001010.10100111.00100000.00000000
subnet mask11111111.11111111.11111000.00000000
network00001010.10100111.00100000.00000000
broadcast00001010.10100111.00100111.11111111
green = network part, grey = host part
hex0x0aa72000
decimal178724864
reverse dns0.32.167.10.in-addr.arpa
ipv4-mapped::ffff:aa7:2000

/21 split into /27 · 64 subnets

close ×
#networkhost rangebroadcast
110.167.32.0/2710.167.32.1 – 10.167.32.3010.167.32.31
210.167.32.32/2710.167.32.33 – 10.167.32.6210.167.32.63
310.167.32.64/2710.167.32.65 – 10.167.32.9410.167.32.95
410.167.32.96/2710.167.32.97 – 10.167.32.12610.167.32.127
510.167.32.128/2710.167.32.129 – 10.167.32.15810.167.32.159
610.167.32.160/2710.167.32.161 – 10.167.32.19010.167.32.191
710.167.32.192/2710.167.32.193 – 10.167.32.22210.167.32.223
810.167.32.224/2710.167.32.225 – 10.167.32.25410.167.32.255
910.167.33.0/2710.167.33.1 – 10.167.33.3010.167.33.31
1010.167.33.32/2710.167.33.33 – 10.167.33.6210.167.33.63
1110.167.33.64/2710.167.33.65 – 10.167.33.9410.167.33.95
1210.167.33.96/2710.167.33.97 – 10.167.33.12610.167.33.127
1310.167.33.128/2710.167.33.129 – 10.167.33.15810.167.33.159
1410.167.33.160/2710.167.33.161 – 10.167.33.19010.167.33.191
1510.167.33.192/2710.167.33.193 – 10.167.33.22210.167.33.223
1610.167.33.224/2710.167.33.225 – 10.167.33.25410.167.33.255
1710.167.34.0/2710.167.34.1 – 10.167.34.3010.167.34.31
1810.167.34.32/2710.167.34.33 – 10.167.34.6210.167.34.63
1910.167.34.64/2710.167.34.65 – 10.167.34.9410.167.34.95
2010.167.34.96/2710.167.34.97 – 10.167.34.12610.167.34.127
2110.167.34.128/2710.167.34.129 – 10.167.34.15810.167.34.159
2210.167.34.160/2710.167.34.161 – 10.167.34.19010.167.34.191
2310.167.34.192/2710.167.34.193 – 10.167.34.22210.167.34.223
2410.167.34.224/2710.167.34.225 – 10.167.34.25410.167.34.255
2510.167.35.0/2710.167.35.1 – 10.167.35.3010.167.35.31
2610.167.35.32/2710.167.35.33 – 10.167.35.6210.167.35.63
2710.167.35.64/2710.167.35.65 – 10.167.35.9410.167.35.95
2810.167.35.96/2710.167.35.97 – 10.167.35.12610.167.35.127
2910.167.35.128/2710.167.35.129 – 10.167.35.15810.167.35.159
3010.167.35.160/2710.167.35.161 – 10.167.35.19010.167.35.191
3110.167.35.192/2710.167.35.193 – 10.167.35.22210.167.35.223
3210.167.35.224/2710.167.35.225 – 10.167.35.25410.167.35.255
3310.167.36.0/2710.167.36.1 – 10.167.36.3010.167.36.31
3410.167.36.32/2710.167.36.33 – 10.167.36.6210.167.36.63
3510.167.36.64/2710.167.36.65 – 10.167.36.9410.167.36.95
3610.167.36.96/2710.167.36.97 – 10.167.36.12610.167.36.127
3710.167.36.128/2710.167.36.129 – 10.167.36.15810.167.36.159
3810.167.36.160/2710.167.36.161 – 10.167.36.19010.167.36.191
3910.167.36.192/2710.167.36.193 – 10.167.36.22210.167.36.223
4010.167.36.224/2710.167.36.225 – 10.167.36.25410.167.36.255
4110.167.37.0/2710.167.37.1 – 10.167.37.3010.167.37.31
4210.167.37.32/2710.167.37.33 – 10.167.37.6210.167.37.63
4310.167.37.64/2710.167.37.65 – 10.167.37.9410.167.37.95
4410.167.37.96/2710.167.37.97 – 10.167.37.12610.167.37.127
4510.167.37.128/2710.167.37.129 – 10.167.37.15810.167.37.159
4610.167.37.160/2710.167.37.161 – 10.167.37.19010.167.37.191
4710.167.37.192/2710.167.37.193 – 10.167.37.22210.167.37.223
4810.167.37.224/2710.167.37.225 – 10.167.37.25410.167.37.255
4910.167.38.0/2710.167.38.1 – 10.167.38.3010.167.38.31
5010.167.38.32/2710.167.38.33 – 10.167.38.6210.167.38.63
5110.167.38.64/2710.167.38.65 – 10.167.38.9410.167.38.95
5210.167.38.96/2710.167.38.97 – 10.167.38.12610.167.38.127
5310.167.38.128/2710.167.38.129 – 10.167.38.15810.167.38.159
5410.167.38.160/2710.167.38.161 – 10.167.38.19010.167.38.191
5510.167.38.192/2710.167.38.193 – 10.167.38.22210.167.38.223
5610.167.38.224/2710.167.38.225 – 10.167.38.25410.167.38.255
5710.167.39.0/2710.167.39.1 – 10.167.39.3010.167.39.31
5810.167.39.32/2710.167.39.33 – 10.167.39.6210.167.39.63
5910.167.39.64/2710.167.39.65 – 10.167.39.9410.167.39.95
6010.167.39.96/2710.167.39.97 – 10.167.39.12610.167.39.127
6110.167.39.128/2710.167.39.129 – 10.167.39.15810.167.39.159
6210.167.39.160/2710.167.39.161 – 10.167.39.19010.167.39.191
6310.167.39.192/2710.167.39.193 – 10.167.39.22210.167.39.223
6410.167.39.224/2710.167.39.225 – 10.167.39.25410.167.39.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /21
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,0461
/22255.255.252.01,0241,0222 split →
/23255.255.254.05125104 split →
/24255.255.255.02562548 split →
/25255.255.255.12812812616 split →
/26255.255.255.192646232 split →
/27255.255.255.224323064 split →
/28255.255.255.2401614128 split →
/29255.255.255.24886256 split →
/30255.255.255.25242512 split →
/31255.255.255.254221,024 split →
/32255.255.255.255112,048 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →