ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.167.24.192/26
network10.167.24.192/26
broadcast10.167.24.255
first host10.167.24.193
last host10.167.24.254
subnet mask255.255.255.192
wildcard0.0.0.63
addresses64
usable hosts62
classA
ipcalc 10.167.24.192/26
address00001010.10100111.00011000.11000000
subnet mask11111111.11111111.11111111.11000000
network00001010.10100111.00011000.11000000
broadcast00001010.10100111.00011000.11111111
green = network part, grey = host part
hex0x0aa718c0
decimal178723008
reverse dns192.24.167.10.in-addr.arpa
ipv4-mapped::ffff:aa7:18c0

/26 split into /31 · 32 subnets

close ×
#networkhost rangebroadcast
110.167.24.192/3110.167.24.192 – 10.167.24.19310.167.24.193
210.167.24.194/3110.167.24.194 – 10.167.24.19510.167.24.195
310.167.24.196/3110.167.24.196 – 10.167.24.19710.167.24.197
410.167.24.198/3110.167.24.198 – 10.167.24.19910.167.24.199
510.167.24.200/3110.167.24.200 – 10.167.24.20110.167.24.201
610.167.24.202/3110.167.24.202 – 10.167.24.20310.167.24.203
710.167.24.204/3110.167.24.204 – 10.167.24.20510.167.24.205
810.167.24.206/3110.167.24.206 – 10.167.24.20710.167.24.207
910.167.24.208/3110.167.24.208 – 10.167.24.20910.167.24.209
1010.167.24.210/3110.167.24.210 – 10.167.24.21110.167.24.211
1110.167.24.212/3110.167.24.212 – 10.167.24.21310.167.24.213
1210.167.24.214/3110.167.24.214 – 10.167.24.21510.167.24.215
1310.167.24.216/3110.167.24.216 – 10.167.24.21710.167.24.217
1410.167.24.218/3110.167.24.218 – 10.167.24.21910.167.24.219
1510.167.24.220/3110.167.24.220 – 10.167.24.22110.167.24.221
1610.167.24.222/3110.167.24.222 – 10.167.24.22310.167.24.223
1710.167.24.224/3110.167.24.224 – 10.167.24.22510.167.24.225
1810.167.24.226/3110.167.24.226 – 10.167.24.22710.167.24.227
1910.167.24.228/3110.167.24.228 – 10.167.24.22910.167.24.229
2010.167.24.230/3110.167.24.230 – 10.167.24.23110.167.24.231
2110.167.24.232/3110.167.24.232 – 10.167.24.23310.167.24.233
2210.167.24.234/3110.167.24.234 – 10.167.24.23510.167.24.235
2310.167.24.236/3110.167.24.236 – 10.167.24.23710.167.24.237
2410.167.24.238/3110.167.24.238 – 10.167.24.23910.167.24.239
2510.167.24.240/3110.167.24.240 – 10.167.24.24110.167.24.241
2610.167.24.242/3110.167.24.242 – 10.167.24.24310.167.24.243
2710.167.24.244/3110.167.24.244 – 10.167.24.24510.167.24.245
2810.167.24.246/3110.167.24.246 – 10.167.24.24710.167.24.247
2910.167.24.248/3110.167.24.248 – 10.167.24.24910.167.24.249
3010.167.24.250/3110.167.24.250 – 10.167.24.25110.167.24.251
3110.167.24.252/3110.167.24.252 – 10.167.24.25310.167.24.253
3210.167.24.254/3110.167.24.254 – 10.167.24.25510.167.24.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /26
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.19264621
/27255.255.255.22432302 split →
/28255.255.255.24016144 split →
/29255.255.255.248868 split →
/30255.255.255.2524216 split →
/31255.255.255.2542232 split →
/32255.255.255.2551164 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →