ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
private IP (RFC 1918)10.167.23.0/24
network10.167.23.0/24
broadcast10.167.23.255
first host10.167.23.1
last host10.167.23.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.167.23.0/24
address00001010.10100111.00010111.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.10100111.00010111.00000000
broadcast00001010.10100111.00010111.11111111
green = network part, grey = host part
hex0x0aa71700
decimal178722560
reverse dns0.23.167.10.in-addr.arpa
ipv4-mapped::ffff:aa7:1700

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.167.23.0/3010.167.23.1 – 10.167.23.210.167.23.3
210.167.23.4/3010.167.23.5 – 10.167.23.610.167.23.7
310.167.23.8/3010.167.23.9 – 10.167.23.1010.167.23.11
410.167.23.12/3010.167.23.13 – 10.167.23.1410.167.23.15
510.167.23.16/3010.167.23.17 – 10.167.23.1810.167.23.19
610.167.23.20/3010.167.23.21 – 10.167.23.2210.167.23.23
710.167.23.24/3010.167.23.25 – 10.167.23.2610.167.23.27
810.167.23.28/3010.167.23.29 – 10.167.23.3010.167.23.31
910.167.23.32/3010.167.23.33 – 10.167.23.3410.167.23.35
1010.167.23.36/3010.167.23.37 – 10.167.23.3810.167.23.39
1110.167.23.40/3010.167.23.41 – 10.167.23.4210.167.23.43
1210.167.23.44/3010.167.23.45 – 10.167.23.4610.167.23.47
1310.167.23.48/3010.167.23.49 – 10.167.23.5010.167.23.51
1410.167.23.52/3010.167.23.53 – 10.167.23.5410.167.23.55
1510.167.23.56/3010.167.23.57 – 10.167.23.5810.167.23.59
1610.167.23.60/3010.167.23.61 – 10.167.23.6210.167.23.63
1710.167.23.64/3010.167.23.65 – 10.167.23.6610.167.23.67
1810.167.23.68/3010.167.23.69 – 10.167.23.7010.167.23.71
1910.167.23.72/3010.167.23.73 – 10.167.23.7410.167.23.75
2010.167.23.76/3010.167.23.77 – 10.167.23.7810.167.23.79
2110.167.23.80/3010.167.23.81 – 10.167.23.8210.167.23.83
2210.167.23.84/3010.167.23.85 – 10.167.23.8610.167.23.87
2310.167.23.88/3010.167.23.89 – 10.167.23.9010.167.23.91
2410.167.23.92/3010.167.23.93 – 10.167.23.9410.167.23.95
2510.167.23.96/3010.167.23.97 – 10.167.23.9810.167.23.99
2610.167.23.100/3010.167.23.101 – 10.167.23.10210.167.23.103
2710.167.23.104/3010.167.23.105 – 10.167.23.10610.167.23.107
2810.167.23.108/3010.167.23.109 – 10.167.23.11010.167.23.111
2910.167.23.112/3010.167.23.113 – 10.167.23.11410.167.23.115
3010.167.23.116/3010.167.23.117 – 10.167.23.11810.167.23.119
3110.167.23.120/3010.167.23.121 – 10.167.23.12210.167.23.123
3210.167.23.124/3010.167.23.125 – 10.167.23.12610.167.23.127
3310.167.23.128/3010.167.23.129 – 10.167.23.13010.167.23.131
3410.167.23.132/3010.167.23.133 – 10.167.23.13410.167.23.135
3510.167.23.136/3010.167.23.137 – 10.167.23.13810.167.23.139
3610.167.23.140/3010.167.23.141 – 10.167.23.14210.167.23.143
3710.167.23.144/3010.167.23.145 – 10.167.23.14610.167.23.147
3810.167.23.148/3010.167.23.149 – 10.167.23.15010.167.23.151
3910.167.23.152/3010.167.23.153 – 10.167.23.15410.167.23.155
4010.167.23.156/3010.167.23.157 – 10.167.23.15810.167.23.159
4110.167.23.160/3010.167.23.161 – 10.167.23.16210.167.23.163
4210.167.23.164/3010.167.23.165 – 10.167.23.16610.167.23.167
4310.167.23.168/3010.167.23.169 – 10.167.23.17010.167.23.171
4410.167.23.172/3010.167.23.173 – 10.167.23.17410.167.23.175
4510.167.23.176/3010.167.23.177 – 10.167.23.17810.167.23.179
4610.167.23.180/3010.167.23.181 – 10.167.23.18210.167.23.183
4710.167.23.184/3010.167.23.185 – 10.167.23.18610.167.23.187
4810.167.23.188/3010.167.23.189 – 10.167.23.19010.167.23.191
4910.167.23.192/3010.167.23.193 – 10.167.23.19410.167.23.195
5010.167.23.196/3010.167.23.197 – 10.167.23.19810.167.23.199
5110.167.23.200/3010.167.23.201 – 10.167.23.20210.167.23.203
5210.167.23.204/3010.167.23.205 – 10.167.23.20610.167.23.207
5310.167.23.208/3010.167.23.209 – 10.167.23.21010.167.23.211
5410.167.23.212/3010.167.23.213 – 10.167.23.21410.167.23.215
5510.167.23.216/3010.167.23.217 – 10.167.23.21810.167.23.219
5610.167.23.220/3010.167.23.221 – 10.167.23.22210.167.23.223
5710.167.23.224/3010.167.23.225 – 10.167.23.22610.167.23.227
5810.167.23.228/3010.167.23.229 – 10.167.23.23010.167.23.231
5910.167.23.232/3010.167.23.233 – 10.167.23.23410.167.23.235
6010.167.23.236/3010.167.23.237 – 10.167.23.23810.167.23.239
6110.167.23.240/3010.167.23.241 – 10.167.23.24210.167.23.243
6210.167.23.244/3010.167.23.245 – 10.167.23.24610.167.23.247
6310.167.23.248/3010.167.23.249 – 10.167.23.25010.167.23.251
6410.167.23.252/3010.167.23.253 – 10.167.23.25410.167.23.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →