ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.167.181.0/24
network10.167.181.0/24
broadcast10.167.181.255
first host10.167.181.1
last host10.167.181.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.167.181.0/24
address00001010.10100111.10110101.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.10100111.10110101.00000000
broadcast00001010.10100111.10110101.11111111
green = network part, grey = host part
hex0x0aa7b500
decimal178763008
reverse dns0.181.167.10.in-addr.arpa
ipv4-mapped::ffff:aa7:b500

/24 split into /29 · 32 subnets

close ×
#networkhost rangebroadcast
110.167.181.0/2910.167.181.1 – 10.167.181.610.167.181.7
210.167.181.8/2910.167.181.9 – 10.167.181.1410.167.181.15
310.167.181.16/2910.167.181.17 – 10.167.181.2210.167.181.23
410.167.181.24/2910.167.181.25 – 10.167.181.3010.167.181.31
510.167.181.32/2910.167.181.33 – 10.167.181.3810.167.181.39
610.167.181.40/2910.167.181.41 – 10.167.181.4610.167.181.47
710.167.181.48/2910.167.181.49 – 10.167.181.5410.167.181.55
810.167.181.56/2910.167.181.57 – 10.167.181.6210.167.181.63
910.167.181.64/2910.167.181.65 – 10.167.181.7010.167.181.71
1010.167.181.72/2910.167.181.73 – 10.167.181.7810.167.181.79
1110.167.181.80/2910.167.181.81 – 10.167.181.8610.167.181.87
1210.167.181.88/2910.167.181.89 – 10.167.181.9410.167.181.95
1310.167.181.96/2910.167.181.97 – 10.167.181.10210.167.181.103
1410.167.181.104/2910.167.181.105 – 10.167.181.11010.167.181.111
1510.167.181.112/2910.167.181.113 – 10.167.181.11810.167.181.119
1610.167.181.120/2910.167.181.121 – 10.167.181.12610.167.181.127
1710.167.181.128/2910.167.181.129 – 10.167.181.13410.167.181.135
1810.167.181.136/2910.167.181.137 – 10.167.181.14210.167.181.143
1910.167.181.144/2910.167.181.145 – 10.167.181.15010.167.181.151
2010.167.181.152/2910.167.181.153 – 10.167.181.15810.167.181.159
2110.167.181.160/2910.167.181.161 – 10.167.181.16610.167.181.167
2210.167.181.168/2910.167.181.169 – 10.167.181.17410.167.181.175
2310.167.181.176/2910.167.181.177 – 10.167.181.18210.167.181.183
2410.167.181.184/2910.167.181.185 – 10.167.181.19010.167.181.191
2510.167.181.192/2910.167.181.193 – 10.167.181.19810.167.181.199
2610.167.181.200/2910.167.181.201 – 10.167.181.20610.167.181.207
2710.167.181.208/2910.167.181.209 – 10.167.181.21410.167.181.215
2810.167.181.216/2910.167.181.217 – 10.167.181.22210.167.181.223
2910.167.181.224/2910.167.181.225 – 10.167.181.23010.167.181.231
3010.167.181.232/2910.167.181.233 – 10.167.181.23810.167.181.239
3110.167.181.240/2910.167.181.241 – 10.167.181.24610.167.181.247
3210.167.181.248/2910.167.181.249 – 10.167.181.25410.167.181.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →