ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.167.14.64/26
network10.167.14.64/26
broadcast10.167.14.127
first host10.167.14.65
last host10.167.14.126
subnet mask255.255.255.192
wildcard0.0.0.63
addresses64
usable hosts62
classA
ipcalc 10.167.14.64/26
address00001010.10100111.00001110.01000000
subnet mask11111111.11111111.11111111.11000000
network00001010.10100111.00001110.01000000
broadcast00001010.10100111.00001110.01111111
green = network part, grey = host part
hex0x0aa70e40
decimal178720320
reverse dns64.14.167.10.in-addr.arpa
ipv4-mapped::ffff:aa7:e40

/26 split into /32 · 64 subnets

close ×
#networkhost rangebroadcast
110.167.14.64/3210.167.14.64 – 10.167.14.6410.167.14.64
210.167.14.65/3210.167.14.65 – 10.167.14.6510.167.14.65
310.167.14.66/3210.167.14.66 – 10.167.14.6610.167.14.66
410.167.14.67/3210.167.14.67 – 10.167.14.6710.167.14.67
510.167.14.68/3210.167.14.68 – 10.167.14.6810.167.14.68
610.167.14.69/3210.167.14.69 – 10.167.14.6910.167.14.69
710.167.14.70/3210.167.14.70 – 10.167.14.7010.167.14.70
810.167.14.71/3210.167.14.71 – 10.167.14.7110.167.14.71
910.167.14.72/3210.167.14.72 – 10.167.14.7210.167.14.72
1010.167.14.73/3210.167.14.73 – 10.167.14.7310.167.14.73
1110.167.14.74/3210.167.14.74 – 10.167.14.7410.167.14.74
1210.167.14.75/3210.167.14.75 – 10.167.14.7510.167.14.75
1310.167.14.76/3210.167.14.76 – 10.167.14.7610.167.14.76
1410.167.14.77/3210.167.14.77 – 10.167.14.7710.167.14.77
1510.167.14.78/3210.167.14.78 – 10.167.14.7810.167.14.78
1610.167.14.79/3210.167.14.79 – 10.167.14.7910.167.14.79
1710.167.14.80/3210.167.14.80 – 10.167.14.8010.167.14.80
1810.167.14.81/3210.167.14.81 – 10.167.14.8110.167.14.81
1910.167.14.82/3210.167.14.82 – 10.167.14.8210.167.14.82
2010.167.14.83/3210.167.14.83 – 10.167.14.8310.167.14.83
2110.167.14.84/3210.167.14.84 – 10.167.14.8410.167.14.84
2210.167.14.85/3210.167.14.85 – 10.167.14.8510.167.14.85
2310.167.14.86/3210.167.14.86 – 10.167.14.8610.167.14.86
2410.167.14.87/3210.167.14.87 – 10.167.14.8710.167.14.87
2510.167.14.88/3210.167.14.88 – 10.167.14.8810.167.14.88
2610.167.14.89/3210.167.14.89 – 10.167.14.8910.167.14.89
2710.167.14.90/3210.167.14.90 – 10.167.14.9010.167.14.90
2810.167.14.91/3210.167.14.91 – 10.167.14.9110.167.14.91
2910.167.14.92/3210.167.14.92 – 10.167.14.9210.167.14.92
3010.167.14.93/3210.167.14.93 – 10.167.14.9310.167.14.93
3110.167.14.94/3210.167.14.94 – 10.167.14.9410.167.14.94
3210.167.14.95/3210.167.14.95 – 10.167.14.9510.167.14.95
3310.167.14.96/3210.167.14.96 – 10.167.14.9610.167.14.96
3410.167.14.97/3210.167.14.97 – 10.167.14.9710.167.14.97
3510.167.14.98/3210.167.14.98 – 10.167.14.9810.167.14.98
3610.167.14.99/3210.167.14.99 – 10.167.14.9910.167.14.99
3710.167.14.100/3210.167.14.100 – 10.167.14.10010.167.14.100
3810.167.14.101/3210.167.14.101 – 10.167.14.10110.167.14.101
3910.167.14.102/3210.167.14.102 – 10.167.14.10210.167.14.102
4010.167.14.103/3210.167.14.103 – 10.167.14.10310.167.14.103
4110.167.14.104/3210.167.14.104 – 10.167.14.10410.167.14.104
4210.167.14.105/3210.167.14.105 – 10.167.14.10510.167.14.105
4310.167.14.106/3210.167.14.106 – 10.167.14.10610.167.14.106
4410.167.14.107/3210.167.14.107 – 10.167.14.10710.167.14.107
4510.167.14.108/3210.167.14.108 – 10.167.14.10810.167.14.108
4610.167.14.109/3210.167.14.109 – 10.167.14.10910.167.14.109
4710.167.14.110/3210.167.14.110 – 10.167.14.11010.167.14.110
4810.167.14.111/3210.167.14.111 – 10.167.14.11110.167.14.111
4910.167.14.112/3210.167.14.112 – 10.167.14.11210.167.14.112
5010.167.14.113/3210.167.14.113 – 10.167.14.11310.167.14.113
5110.167.14.114/3210.167.14.114 – 10.167.14.11410.167.14.114
5210.167.14.115/3210.167.14.115 – 10.167.14.11510.167.14.115
5310.167.14.116/3210.167.14.116 – 10.167.14.11610.167.14.116
5410.167.14.117/3210.167.14.117 – 10.167.14.11710.167.14.117
5510.167.14.118/3210.167.14.118 – 10.167.14.11810.167.14.118
5610.167.14.119/3210.167.14.119 – 10.167.14.11910.167.14.119
5710.167.14.120/3210.167.14.120 – 10.167.14.12010.167.14.120
5810.167.14.121/3210.167.14.121 – 10.167.14.12110.167.14.121
5910.167.14.122/3210.167.14.122 – 10.167.14.12210.167.14.122
6010.167.14.123/3210.167.14.123 – 10.167.14.12310.167.14.123
6110.167.14.124/3210.167.14.124 – 10.167.14.12410.167.14.124
6210.167.14.125/3210.167.14.125 – 10.167.14.12510.167.14.125
6310.167.14.126/3210.167.14.126 – 10.167.14.12610.167.14.126
6410.167.14.127/3210.167.14.127 – 10.167.14.12710.167.14.127
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /26
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.19264621
/27255.255.255.22432302 split →
/28255.255.255.24016144 split →
/29255.255.255.248868 split →
/30255.255.255.2524216 split →
/31255.255.255.2542232 split →
/32255.255.255.2551164 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →