ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.167.12.128/25
network10.167.12.128/25
broadcast10.167.12.255
first host10.167.12.129
last host10.167.12.254
subnet mask255.255.255.128
wildcard0.0.0.127
addresses128
usable hosts126
classA
ipcalc 10.167.12.128/25
address00001010.10100111.00001100.10000000
subnet mask11111111.11111111.11111111.10000000
network00001010.10100111.00001100.10000000
broadcast00001010.10100111.00001100.11111111
green = network part, grey = host part
hex0x0aa70c80
decimal178719872
reverse dns128.12.167.10.in-addr.arpa
ipv4-mapped::ffff:aa7:c80

/25 split into /30 · 32 subnets

close ×
#networkhost rangebroadcast
110.167.12.128/3010.167.12.129 – 10.167.12.13010.167.12.131
210.167.12.132/3010.167.12.133 – 10.167.12.13410.167.12.135
310.167.12.136/3010.167.12.137 – 10.167.12.13810.167.12.139
410.167.12.140/3010.167.12.141 – 10.167.12.14210.167.12.143
510.167.12.144/3010.167.12.145 – 10.167.12.14610.167.12.147
610.167.12.148/3010.167.12.149 – 10.167.12.15010.167.12.151
710.167.12.152/3010.167.12.153 – 10.167.12.15410.167.12.155
810.167.12.156/3010.167.12.157 – 10.167.12.15810.167.12.159
910.167.12.160/3010.167.12.161 – 10.167.12.16210.167.12.163
1010.167.12.164/3010.167.12.165 – 10.167.12.16610.167.12.167
1110.167.12.168/3010.167.12.169 – 10.167.12.17010.167.12.171
1210.167.12.172/3010.167.12.173 – 10.167.12.17410.167.12.175
1310.167.12.176/3010.167.12.177 – 10.167.12.17810.167.12.179
1410.167.12.180/3010.167.12.181 – 10.167.12.18210.167.12.183
1510.167.12.184/3010.167.12.185 – 10.167.12.18610.167.12.187
1610.167.12.188/3010.167.12.189 – 10.167.12.19010.167.12.191
1710.167.12.192/3010.167.12.193 – 10.167.12.19410.167.12.195
1810.167.12.196/3010.167.12.197 – 10.167.12.19810.167.12.199
1910.167.12.200/3010.167.12.201 – 10.167.12.20210.167.12.203
2010.167.12.204/3010.167.12.205 – 10.167.12.20610.167.12.207
2110.167.12.208/3010.167.12.209 – 10.167.12.21010.167.12.211
2210.167.12.212/3010.167.12.213 – 10.167.12.21410.167.12.215
2310.167.12.216/3010.167.12.217 – 10.167.12.21810.167.12.219
2410.167.12.220/3010.167.12.221 – 10.167.12.22210.167.12.223
2510.167.12.224/3010.167.12.225 – 10.167.12.22610.167.12.227
2610.167.12.228/3010.167.12.229 – 10.167.12.23010.167.12.231
2710.167.12.232/3010.167.12.233 – 10.167.12.23410.167.12.235
2810.167.12.236/3010.167.12.237 – 10.167.12.23810.167.12.239
2910.167.12.240/3010.167.12.241 – 10.167.12.24210.167.12.243
3010.167.12.244/3010.167.12.245 – 10.167.12.24610.167.12.247
3110.167.12.248/3010.167.12.249 – 10.167.12.25010.167.12.251
3210.167.12.252/3010.167.12.253 – 10.167.12.25410.167.12.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /25
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.1281281261
/26255.255.255.19264622 split →
/27255.255.255.22432304 split →
/28255.255.255.24016148 split →
/29255.255.255.2488616 split →
/30255.255.255.2524232 split →
/31255.255.255.2542264 split →
/32255.255.255.25511128 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →