ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.167.0.0/19
network10.167.0.0/19
broadcast10.167.31.255
first host10.167.0.1
last host10.167.31.254
subnet mask255.255.224.0
wildcard0.0.31.255
addresses8,192
usable hosts8,190
classA
ipcalc 10.167.0.0/19
address00001010.10100111.00000000.00000000
subnet mask11111111.11111111.11100000.00000000
network00001010.10100111.00000000.00000000
broadcast00001010.10100111.00011111.11111111
green = network part, grey = host part
hex0x0aa70000
decimal178716672
reverse dns0.0.167.10.in-addr.arpa
ipv4-mapped::ffff:aa7:0

/19 split into /25 · 64 subnets

close ×
#networkhost rangebroadcast
110.167.0.0/2510.167.0.1 – 10.167.0.12610.167.0.127
210.167.0.128/2510.167.0.129 – 10.167.0.25410.167.0.255
310.167.1.0/2510.167.1.1 – 10.167.1.12610.167.1.127
410.167.1.128/2510.167.1.129 – 10.167.1.25410.167.1.255
510.167.2.0/2510.167.2.1 – 10.167.2.12610.167.2.127
610.167.2.128/2510.167.2.129 – 10.167.2.25410.167.2.255
710.167.3.0/2510.167.3.1 – 10.167.3.12610.167.3.127
810.167.3.128/2510.167.3.129 – 10.167.3.25410.167.3.255
910.167.4.0/2510.167.4.1 – 10.167.4.12610.167.4.127
1010.167.4.128/2510.167.4.129 – 10.167.4.25410.167.4.255
1110.167.5.0/2510.167.5.1 – 10.167.5.12610.167.5.127
1210.167.5.128/2510.167.5.129 – 10.167.5.25410.167.5.255
1310.167.6.0/2510.167.6.1 – 10.167.6.12610.167.6.127
1410.167.6.128/2510.167.6.129 – 10.167.6.25410.167.6.255
1510.167.7.0/2510.167.7.1 – 10.167.7.12610.167.7.127
1610.167.7.128/2510.167.7.129 – 10.167.7.25410.167.7.255
1710.167.8.0/2510.167.8.1 – 10.167.8.12610.167.8.127
1810.167.8.128/2510.167.8.129 – 10.167.8.25410.167.8.255
1910.167.9.0/2510.167.9.1 – 10.167.9.12610.167.9.127
2010.167.9.128/2510.167.9.129 – 10.167.9.25410.167.9.255
2110.167.10.0/2510.167.10.1 – 10.167.10.12610.167.10.127
2210.167.10.128/2510.167.10.129 – 10.167.10.25410.167.10.255
2310.167.11.0/2510.167.11.1 – 10.167.11.12610.167.11.127
2410.167.11.128/2510.167.11.129 – 10.167.11.25410.167.11.255
2510.167.12.0/2510.167.12.1 – 10.167.12.12610.167.12.127
2610.167.12.128/2510.167.12.129 – 10.167.12.25410.167.12.255
2710.167.13.0/2510.167.13.1 – 10.167.13.12610.167.13.127
2810.167.13.128/2510.167.13.129 – 10.167.13.25410.167.13.255
2910.167.14.0/2510.167.14.1 – 10.167.14.12610.167.14.127
3010.167.14.128/2510.167.14.129 – 10.167.14.25410.167.14.255
3110.167.15.0/2510.167.15.1 – 10.167.15.12610.167.15.127
3210.167.15.128/2510.167.15.129 – 10.167.15.25410.167.15.255
3310.167.16.0/2510.167.16.1 – 10.167.16.12610.167.16.127
3410.167.16.128/2510.167.16.129 – 10.167.16.25410.167.16.255
3510.167.17.0/2510.167.17.1 – 10.167.17.12610.167.17.127
3610.167.17.128/2510.167.17.129 – 10.167.17.25410.167.17.255
3710.167.18.0/2510.167.18.1 – 10.167.18.12610.167.18.127
3810.167.18.128/2510.167.18.129 – 10.167.18.25410.167.18.255
3910.167.19.0/2510.167.19.1 – 10.167.19.12610.167.19.127
4010.167.19.128/2510.167.19.129 – 10.167.19.25410.167.19.255
4110.167.20.0/2510.167.20.1 – 10.167.20.12610.167.20.127
4210.167.20.128/2510.167.20.129 – 10.167.20.25410.167.20.255
4310.167.21.0/2510.167.21.1 – 10.167.21.12610.167.21.127
4410.167.21.128/2510.167.21.129 – 10.167.21.25410.167.21.255
4510.167.22.0/2510.167.22.1 – 10.167.22.12610.167.22.127
4610.167.22.128/2510.167.22.129 – 10.167.22.25410.167.22.255
4710.167.23.0/2510.167.23.1 – 10.167.23.12610.167.23.127
4810.167.23.128/2510.167.23.129 – 10.167.23.25410.167.23.255
4910.167.24.0/2510.167.24.1 – 10.167.24.12610.167.24.127
5010.167.24.128/2510.167.24.129 – 10.167.24.25410.167.24.255
5110.167.25.0/2510.167.25.1 – 10.167.25.12610.167.25.127
5210.167.25.128/2510.167.25.129 – 10.167.25.25410.167.25.255
5310.167.26.0/2510.167.26.1 – 10.167.26.12610.167.26.127
5410.167.26.128/2510.167.26.129 – 10.167.26.25410.167.26.255
5510.167.27.0/2510.167.27.1 – 10.167.27.12610.167.27.127
5610.167.27.128/2510.167.27.129 – 10.167.27.25410.167.27.255
5710.167.28.0/2510.167.28.1 – 10.167.28.12610.167.28.127
5810.167.28.128/2510.167.28.129 – 10.167.28.25410.167.28.255
5910.167.29.0/2510.167.29.1 – 10.167.29.12610.167.29.127
6010.167.29.128/2510.167.29.129 – 10.167.29.25410.167.29.255
6110.167.30.0/2510.167.30.1 – 10.167.30.12610.167.30.127
6210.167.30.128/2510.167.30.129 – 10.167.30.25410.167.30.255
6310.167.31.0/2510.167.31.1 – 10.167.31.12610.167.31.127
6410.167.31.128/2510.167.31.129 – 10.167.31.25410.167.31.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /19
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,1901
/20255.255.240.04,0964,0942 split →
/21255.255.248.02,0482,0464 split →
/22255.255.252.01,0241,0228 split →
/23255.255.254.051251016 split →
/24255.255.255.025625432 split →
/25255.255.255.12812812664 split →
/26255.255.255.1926462128 split →
/27255.255.255.2243230256 split →
/28255.255.255.2401614512 split →
/29255.255.255.248861,024 split →
/30255.255.255.252422,048 split →
/31255.255.255.254224,096 split →
/32255.255.255.255118,192 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →