ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.161.0.0/16
network10.161.0.0/16
broadcast10.161.255.255
first host10.161.0.1
last host10.161.255.254
subnet mask255.255.0.0
wildcard0.0.255.255
addresses65,536
usable hosts65,534
classA
ipcalc 10.161.0.0/16
address00001010.10100001.00000000.00000000
subnet mask11111111.11111111.00000000.00000000
network00001010.10100001.00000000.00000000
broadcast00001010.10100001.11111111.11111111
green = network part, grey = host part
hex0x0aa10000
decimal178323456
reverse dns0.0.161.10.in-addr.arpa
ipv4-mapped::ffff:aa1:0

/16 split into /22 · 64 subnets

close ×
#networkhost rangebroadcast
110.161.0.0/2210.161.0.1 – 10.161.3.25410.161.3.255
210.161.4.0/2210.161.4.1 – 10.161.7.25410.161.7.255
310.161.8.0/2210.161.8.1 – 10.161.11.25410.161.11.255
410.161.12.0/2210.161.12.1 – 10.161.15.25410.161.15.255
510.161.16.0/2210.161.16.1 – 10.161.19.25410.161.19.255
610.161.20.0/2210.161.20.1 – 10.161.23.25410.161.23.255
710.161.24.0/2210.161.24.1 – 10.161.27.25410.161.27.255
810.161.28.0/2210.161.28.1 – 10.161.31.25410.161.31.255
910.161.32.0/2210.161.32.1 – 10.161.35.25410.161.35.255
1010.161.36.0/2210.161.36.1 – 10.161.39.25410.161.39.255
1110.161.40.0/2210.161.40.1 – 10.161.43.25410.161.43.255
1210.161.44.0/2210.161.44.1 – 10.161.47.25410.161.47.255
1310.161.48.0/2210.161.48.1 – 10.161.51.25410.161.51.255
1410.161.52.0/2210.161.52.1 – 10.161.55.25410.161.55.255
1510.161.56.0/2210.161.56.1 – 10.161.59.25410.161.59.255
1610.161.60.0/2210.161.60.1 – 10.161.63.25410.161.63.255
1710.161.64.0/2210.161.64.1 – 10.161.67.25410.161.67.255
1810.161.68.0/2210.161.68.1 – 10.161.71.25410.161.71.255
1910.161.72.0/2210.161.72.1 – 10.161.75.25410.161.75.255
2010.161.76.0/2210.161.76.1 – 10.161.79.25410.161.79.255
2110.161.80.0/2210.161.80.1 – 10.161.83.25410.161.83.255
2210.161.84.0/2210.161.84.1 – 10.161.87.25410.161.87.255
2310.161.88.0/2210.161.88.1 – 10.161.91.25410.161.91.255
2410.161.92.0/2210.161.92.1 – 10.161.95.25410.161.95.255
2510.161.96.0/2210.161.96.1 – 10.161.99.25410.161.99.255
2610.161.100.0/2210.161.100.1 – 10.161.103.25410.161.103.255
2710.161.104.0/2210.161.104.1 – 10.161.107.25410.161.107.255
2810.161.108.0/2210.161.108.1 – 10.161.111.25410.161.111.255
2910.161.112.0/2210.161.112.1 – 10.161.115.25410.161.115.255
3010.161.116.0/2210.161.116.1 – 10.161.119.25410.161.119.255
3110.161.120.0/2210.161.120.1 – 10.161.123.25410.161.123.255
3210.161.124.0/2210.161.124.1 – 10.161.127.25410.161.127.255
3310.161.128.0/2210.161.128.1 – 10.161.131.25410.161.131.255
3410.161.132.0/2210.161.132.1 – 10.161.135.25410.161.135.255
3510.161.136.0/2210.161.136.1 – 10.161.139.25410.161.139.255
3610.161.140.0/2210.161.140.1 – 10.161.143.25410.161.143.255
3710.161.144.0/2210.161.144.1 – 10.161.147.25410.161.147.255
3810.161.148.0/2210.161.148.1 – 10.161.151.25410.161.151.255
3910.161.152.0/2210.161.152.1 – 10.161.155.25410.161.155.255
4010.161.156.0/2210.161.156.1 – 10.161.159.25410.161.159.255
4110.161.160.0/2210.161.160.1 – 10.161.163.25410.161.163.255
4210.161.164.0/2210.161.164.1 – 10.161.167.25410.161.167.255
4310.161.168.0/2210.161.168.1 – 10.161.171.25410.161.171.255
4410.161.172.0/2210.161.172.1 – 10.161.175.25410.161.175.255
4510.161.176.0/2210.161.176.1 – 10.161.179.25410.161.179.255
4610.161.180.0/2210.161.180.1 – 10.161.183.25410.161.183.255
4710.161.184.0/2210.161.184.1 – 10.161.187.25410.161.187.255
4810.161.188.0/2210.161.188.1 – 10.161.191.25410.161.191.255
4910.161.192.0/2210.161.192.1 – 10.161.195.25410.161.195.255
5010.161.196.0/2210.161.196.1 – 10.161.199.25410.161.199.255
5110.161.200.0/2210.161.200.1 – 10.161.203.25410.161.203.255
5210.161.204.0/2210.161.204.1 – 10.161.207.25410.161.207.255
5310.161.208.0/2210.161.208.1 – 10.161.211.25410.161.211.255
5410.161.212.0/2210.161.212.1 – 10.161.215.25410.161.215.255
5510.161.216.0/2210.161.216.1 – 10.161.219.25410.161.219.255
5610.161.220.0/2210.161.220.1 – 10.161.223.25410.161.223.255
5710.161.224.0/2210.161.224.1 – 10.161.227.25410.161.227.255
5810.161.228.0/2210.161.228.1 – 10.161.231.25410.161.231.255
5910.161.232.0/2210.161.232.1 – 10.161.235.25410.161.235.255
6010.161.236.0/2210.161.236.1 – 10.161.239.25410.161.239.255
6110.161.240.0/2210.161.240.1 – 10.161.243.25410.161.243.255
6210.161.244.0/2210.161.244.1 – 10.161.247.25410.161.247.255
6310.161.248.0/2210.161.248.1 – 10.161.251.25410.161.251.255
6410.161.252.0/2210.161.252.1 – 10.161.255.25410.161.255.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /16
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,5341
/17255.255.128.032,76832,7662 split →
/18255.255.192.016,38416,3824 split →
/19255.255.224.08,1928,1908 split →
/20255.255.240.04,0964,09416 split →
/21255.255.248.02,0482,04632 split →
/22255.255.252.01,0241,02264 split →
/23255.255.254.0512510128 split →
/24255.255.255.0256254256 split →
/25255.255.255.128128126512 split →
/26255.255.255.19264621,024 split →
/27255.255.255.22432302,048 split →
/28255.255.255.24016144,096 split →
/29255.255.255.248868,192 split →
/30255.255.255.2524216,384 split →
/31255.255.255.2542232,768 split →
/32255.255.255.2551165,536 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →