ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
private IP (RFC 1918)10.160.0.0/11
network10.160.0.0/11
broadcast10.191.255.255
first host10.160.0.1
last host10.191.255.254
subnet mask255.224.0.0
wildcard0.31.255.255
addresses2,097,152
usable hosts2,097,150
classA
ipcalc 10.160.0.0/11
address00001010.10100000.00000000.00000000
subnet mask11111111.11100000.00000000.00000000
network00001010.10100000.00000000.00000000
broadcast00001010.10111111.11111111.11111111
green = network part, grey = host part
hex0x0aa00000
decimal178257920
reverse dns0.0.160.10.in-addr.arpa
ipv4-mapped::ffff:aa0:0

/11 split into /18 · 128 subnets

close ×
#networkhost rangebroadcast
110.160.0.0/1810.160.0.1 – 10.160.63.25410.160.63.255
210.160.64.0/1810.160.64.1 – 10.160.127.25410.160.127.255
310.160.128.0/1810.160.128.1 – 10.160.191.25410.160.191.255
410.160.192.0/1810.160.192.1 – 10.160.255.25410.160.255.255
510.161.0.0/1810.161.0.1 – 10.161.63.25410.161.63.255
610.161.64.0/1810.161.64.1 – 10.161.127.25410.161.127.255
710.161.128.0/1810.161.128.1 – 10.161.191.25410.161.191.255
810.161.192.0/1810.161.192.1 – 10.161.255.25410.161.255.255
910.162.0.0/1810.162.0.1 – 10.162.63.25410.162.63.255
1010.162.64.0/1810.162.64.1 – 10.162.127.25410.162.127.255
1110.162.128.0/1810.162.128.1 – 10.162.191.25410.162.191.255
1210.162.192.0/1810.162.192.1 – 10.162.255.25410.162.255.255
1310.163.0.0/1810.163.0.1 – 10.163.63.25410.163.63.255
1410.163.64.0/1810.163.64.1 – 10.163.127.25410.163.127.255
1510.163.128.0/1810.163.128.1 – 10.163.191.25410.163.191.255
1610.163.192.0/1810.163.192.1 – 10.163.255.25410.163.255.255
1710.164.0.0/1810.164.0.1 – 10.164.63.25410.164.63.255
1810.164.64.0/1810.164.64.1 – 10.164.127.25410.164.127.255
1910.164.128.0/1810.164.128.1 – 10.164.191.25410.164.191.255
2010.164.192.0/1810.164.192.1 – 10.164.255.25410.164.255.255
2110.165.0.0/1810.165.0.1 – 10.165.63.25410.165.63.255
2210.165.64.0/1810.165.64.1 – 10.165.127.25410.165.127.255
2310.165.128.0/1810.165.128.1 – 10.165.191.25410.165.191.255
2410.165.192.0/1810.165.192.1 – 10.165.255.25410.165.255.255
2510.166.0.0/1810.166.0.1 – 10.166.63.25410.166.63.255
2610.166.64.0/1810.166.64.1 – 10.166.127.25410.166.127.255
2710.166.128.0/1810.166.128.1 – 10.166.191.25410.166.191.255
2810.166.192.0/1810.166.192.1 – 10.166.255.25410.166.255.255
2910.167.0.0/1810.167.0.1 – 10.167.63.25410.167.63.255
3010.167.64.0/1810.167.64.1 – 10.167.127.25410.167.127.255
3110.167.128.0/1810.167.128.1 – 10.167.191.25410.167.191.255
3210.167.192.0/1810.167.192.1 – 10.167.255.25410.167.255.255
3310.168.0.0/1810.168.0.1 – 10.168.63.25410.168.63.255
3410.168.64.0/1810.168.64.1 – 10.168.127.25410.168.127.255
3510.168.128.0/1810.168.128.1 – 10.168.191.25410.168.191.255
3610.168.192.0/1810.168.192.1 – 10.168.255.25410.168.255.255
3710.169.0.0/1810.169.0.1 – 10.169.63.25410.169.63.255
3810.169.64.0/1810.169.64.1 – 10.169.127.25410.169.127.255
3910.169.128.0/1810.169.128.1 – 10.169.191.25410.169.191.255
4010.169.192.0/1810.169.192.1 – 10.169.255.25410.169.255.255
4110.170.0.0/1810.170.0.1 – 10.170.63.25410.170.63.255
4210.170.64.0/1810.170.64.1 – 10.170.127.25410.170.127.255
4310.170.128.0/1810.170.128.1 – 10.170.191.25410.170.191.255
4410.170.192.0/1810.170.192.1 – 10.170.255.25410.170.255.255
4510.171.0.0/1810.171.0.1 – 10.171.63.25410.171.63.255
4610.171.64.0/1810.171.64.1 – 10.171.127.25410.171.127.255
4710.171.128.0/1810.171.128.1 – 10.171.191.25410.171.191.255
4810.171.192.0/1810.171.192.1 – 10.171.255.25410.171.255.255
4910.172.0.0/1810.172.0.1 – 10.172.63.25410.172.63.255
5010.172.64.0/1810.172.64.1 – 10.172.127.25410.172.127.255
5110.172.128.0/1810.172.128.1 – 10.172.191.25410.172.191.255
5210.172.192.0/1810.172.192.1 – 10.172.255.25410.172.255.255
5310.173.0.0/1810.173.0.1 – 10.173.63.25410.173.63.255
5410.173.64.0/1810.173.64.1 – 10.173.127.25410.173.127.255
5510.173.128.0/1810.173.128.1 – 10.173.191.25410.173.191.255
5610.173.192.0/1810.173.192.1 – 10.173.255.25410.173.255.255
5710.174.0.0/1810.174.0.1 – 10.174.63.25410.174.63.255
5810.174.64.0/1810.174.64.1 – 10.174.127.25410.174.127.255
5910.174.128.0/1810.174.128.1 – 10.174.191.25410.174.191.255
6010.174.192.0/1810.174.192.1 – 10.174.255.25410.174.255.255
6110.175.0.0/1810.175.0.1 – 10.175.63.25410.175.63.255
6210.175.64.0/1810.175.64.1 – 10.175.127.25410.175.127.255
6310.175.128.0/1810.175.128.1 – 10.175.191.25410.175.191.255
6410.175.192.0/1810.175.192.1 – 10.175.255.25410.175.255.255
6510.176.0.0/1810.176.0.1 – 10.176.63.25410.176.63.255
6610.176.64.0/1810.176.64.1 – 10.176.127.25410.176.127.255
6710.176.128.0/1810.176.128.1 – 10.176.191.25410.176.191.255
6810.176.192.0/1810.176.192.1 – 10.176.255.25410.176.255.255
6910.177.0.0/1810.177.0.1 – 10.177.63.25410.177.63.255
7010.177.64.0/1810.177.64.1 – 10.177.127.25410.177.127.255
7110.177.128.0/1810.177.128.1 – 10.177.191.25410.177.191.255
7210.177.192.0/1810.177.192.1 – 10.177.255.25410.177.255.255
7310.178.0.0/1810.178.0.1 – 10.178.63.25410.178.63.255
7410.178.64.0/1810.178.64.1 – 10.178.127.25410.178.127.255
7510.178.128.0/1810.178.128.1 – 10.178.191.25410.178.191.255
7610.178.192.0/1810.178.192.1 – 10.178.255.25410.178.255.255
7710.179.0.0/1810.179.0.1 – 10.179.63.25410.179.63.255
7810.179.64.0/1810.179.64.1 – 10.179.127.25410.179.127.255
7910.179.128.0/1810.179.128.1 – 10.179.191.25410.179.191.255
8010.179.192.0/1810.179.192.1 – 10.179.255.25410.179.255.255
8110.180.0.0/1810.180.0.1 – 10.180.63.25410.180.63.255
8210.180.64.0/1810.180.64.1 – 10.180.127.25410.180.127.255
8310.180.128.0/1810.180.128.1 – 10.180.191.25410.180.191.255
8410.180.192.0/1810.180.192.1 – 10.180.255.25410.180.255.255
8510.181.0.0/1810.181.0.1 – 10.181.63.25410.181.63.255
8610.181.64.0/1810.181.64.1 – 10.181.127.25410.181.127.255
8710.181.128.0/1810.181.128.1 – 10.181.191.25410.181.191.255
8810.181.192.0/1810.181.192.1 – 10.181.255.25410.181.255.255
8910.182.0.0/1810.182.0.1 – 10.182.63.25410.182.63.255
9010.182.64.0/1810.182.64.1 – 10.182.127.25410.182.127.255
9110.182.128.0/1810.182.128.1 – 10.182.191.25410.182.191.255
9210.182.192.0/1810.182.192.1 – 10.182.255.25410.182.255.255
9310.183.0.0/1810.183.0.1 – 10.183.63.25410.183.63.255
9410.183.64.0/1810.183.64.1 – 10.183.127.25410.183.127.255
9510.183.128.0/1810.183.128.1 – 10.183.191.25410.183.191.255
9610.183.192.0/1810.183.192.1 – 10.183.255.25410.183.255.255
9710.184.0.0/1810.184.0.1 – 10.184.63.25410.184.63.255
9810.184.64.0/1810.184.64.1 – 10.184.127.25410.184.127.255
9910.184.128.0/1810.184.128.1 – 10.184.191.25410.184.191.255
10010.184.192.0/1810.184.192.1 – 10.184.255.25410.184.255.255
10110.185.0.0/1810.185.0.1 – 10.185.63.25410.185.63.255
10210.185.64.0/1810.185.64.1 – 10.185.127.25410.185.127.255
10310.185.128.0/1810.185.128.1 – 10.185.191.25410.185.191.255
10410.185.192.0/1810.185.192.1 – 10.185.255.25410.185.255.255
10510.186.0.0/1810.186.0.1 – 10.186.63.25410.186.63.255
10610.186.64.0/1810.186.64.1 – 10.186.127.25410.186.127.255
10710.186.128.0/1810.186.128.1 – 10.186.191.25410.186.191.255
10810.186.192.0/1810.186.192.1 – 10.186.255.25410.186.255.255
10910.187.0.0/1810.187.0.1 – 10.187.63.25410.187.63.255
11010.187.64.0/1810.187.64.1 – 10.187.127.25410.187.127.255
11110.187.128.0/1810.187.128.1 – 10.187.191.25410.187.191.255
11210.187.192.0/1810.187.192.1 – 10.187.255.25410.187.255.255
11310.188.0.0/1810.188.0.1 – 10.188.63.25410.188.63.255
11410.188.64.0/1810.188.64.1 – 10.188.127.25410.188.127.255
11510.188.128.0/1810.188.128.1 – 10.188.191.25410.188.191.255
11610.188.192.0/1810.188.192.1 – 10.188.255.25410.188.255.255
11710.189.0.0/1810.189.0.1 – 10.189.63.25410.189.63.255
11810.189.64.0/1810.189.64.1 – 10.189.127.25410.189.127.255
11910.189.128.0/1810.189.128.1 – 10.189.191.25410.189.191.255
12010.189.192.0/1810.189.192.1 – 10.189.255.25410.189.255.255
12110.190.0.0/1810.190.0.1 – 10.190.63.25410.190.63.255
12210.190.64.0/1810.190.64.1 – 10.190.127.25410.190.127.255
12310.190.128.0/1810.190.128.1 – 10.190.191.25410.190.191.255
12410.190.192.0/1810.190.192.1 – 10.190.255.25410.190.255.255
12510.191.0.0/1810.191.0.1 – 10.191.63.25410.191.63.255
12610.191.64.0/1810.191.64.1 – 10.191.127.25410.191.127.255
12710.191.128.0/1810.191.128.1 – 10.191.191.25410.191.191.255
12810.191.192.0/1810.191.192.1 – 10.191.255.25410.191.255.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /11
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,1501
/12255.240.0.01,048,5761,048,5742 split →
/13255.248.0.0524,288524,2864 split →
/14255.252.0.0262,144262,1428 split →
/15255.254.0.0131,072131,07016 split →
/16255.255.0.065,53665,53432 split →
/17255.255.128.032,76832,76664 split →
/18255.255.192.016,38416,382128 split →
/19255.255.224.08,1928,190256 split →
/20255.255.240.04,0964,094512 split →
/21255.255.248.02,0482,0461,024 split →
/22255.255.252.01,0241,0222,048 split →
/23255.255.254.05125104,096 split →
/24255.255.255.02562548,192 split →
/25255.255.255.12812812616,384 split →
/26255.255.255.192646232,768 split →
/27255.255.255.224323065,536 split →
/28255.255.255.2401614131,072 split →
/29255.255.255.24886262,144 split →
/30255.255.255.25242524,288 split →
/31255.255.255.254221,048,576 split →
/32255.255.255.255112,097,152 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →