ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.158.4.0/24
network10.158.4.0/24
broadcast10.158.4.255
first host10.158.4.1
last host10.158.4.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.158.4.0/24
address00001010.10011110.00000100.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.10011110.00000100.00000000
broadcast00001010.10011110.00000100.11111111
green = network part, grey = host part
hex0x0a9e0400
decimal178127872
reverse dns0.4.158.10.in-addr.arpa
ipv4-mapped::ffff:a9e:400

/24 split into /29 · 32 subnets

close ×
#networkhost rangebroadcast
110.158.4.0/2910.158.4.1 – 10.158.4.610.158.4.7
210.158.4.8/2910.158.4.9 – 10.158.4.1410.158.4.15
310.158.4.16/2910.158.4.17 – 10.158.4.2210.158.4.23
410.158.4.24/2910.158.4.25 – 10.158.4.3010.158.4.31
510.158.4.32/2910.158.4.33 – 10.158.4.3810.158.4.39
610.158.4.40/2910.158.4.41 – 10.158.4.4610.158.4.47
710.158.4.48/2910.158.4.49 – 10.158.4.5410.158.4.55
810.158.4.56/2910.158.4.57 – 10.158.4.6210.158.4.63
910.158.4.64/2910.158.4.65 – 10.158.4.7010.158.4.71
1010.158.4.72/2910.158.4.73 – 10.158.4.7810.158.4.79
1110.158.4.80/2910.158.4.81 – 10.158.4.8610.158.4.87
1210.158.4.88/2910.158.4.89 – 10.158.4.9410.158.4.95
1310.158.4.96/2910.158.4.97 – 10.158.4.10210.158.4.103
1410.158.4.104/2910.158.4.105 – 10.158.4.11010.158.4.111
1510.158.4.112/2910.158.4.113 – 10.158.4.11810.158.4.119
1610.158.4.120/2910.158.4.121 – 10.158.4.12610.158.4.127
1710.158.4.128/2910.158.4.129 – 10.158.4.13410.158.4.135
1810.158.4.136/2910.158.4.137 – 10.158.4.14210.158.4.143
1910.158.4.144/2910.158.4.145 – 10.158.4.15010.158.4.151
2010.158.4.152/2910.158.4.153 – 10.158.4.15810.158.4.159
2110.158.4.160/2910.158.4.161 – 10.158.4.16610.158.4.167
2210.158.4.168/2910.158.4.169 – 10.158.4.17410.158.4.175
2310.158.4.176/2910.158.4.177 – 10.158.4.18210.158.4.183
2410.158.4.184/2910.158.4.185 – 10.158.4.19010.158.4.191
2510.158.4.192/2910.158.4.193 – 10.158.4.19810.158.4.199
2610.158.4.200/2910.158.4.201 – 10.158.4.20610.158.4.207
2710.158.4.208/2910.158.4.209 – 10.158.4.21410.158.4.215
2810.158.4.216/2910.158.4.217 – 10.158.4.22210.158.4.223
2910.158.4.224/2910.158.4.225 – 10.158.4.23010.158.4.231
3010.158.4.232/2910.158.4.233 – 10.158.4.23810.158.4.239
3110.158.4.240/2910.158.4.241 – 10.158.4.24610.158.4.247
3210.158.4.248/2910.158.4.249 – 10.158.4.25410.158.4.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →