ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.152.26.0/26
network10.152.26.0/26
broadcast10.152.26.63
first host10.152.26.1
last host10.152.26.62
subnet mask255.255.255.192
wildcard0.0.0.63
addresses64
usable hosts62
classA
ipcalc 10.152.26.0/26
address00001010.10011000.00011010.00000000
subnet mask11111111.11111111.11111111.11000000
network00001010.10011000.00011010.00000000
broadcast00001010.10011000.00011010.00111111
green = network part, grey = host part
hex0x0a981a00
decimal177740288
reverse dns0.26.152.10.in-addr.arpa
ipv4-mapped::ffff:a98:1a00

/26 split into /32 · 64 subnets

close ×
#networkhost rangebroadcast
110.152.26.0/3210.152.26.0 – 10.152.26.010.152.26.0
210.152.26.1/3210.152.26.1 – 10.152.26.110.152.26.1
310.152.26.2/3210.152.26.2 – 10.152.26.210.152.26.2
410.152.26.3/3210.152.26.3 – 10.152.26.310.152.26.3
510.152.26.4/3210.152.26.4 – 10.152.26.410.152.26.4
610.152.26.5/3210.152.26.5 – 10.152.26.510.152.26.5
710.152.26.6/3210.152.26.6 – 10.152.26.610.152.26.6
810.152.26.7/3210.152.26.7 – 10.152.26.710.152.26.7
910.152.26.8/3210.152.26.8 – 10.152.26.810.152.26.8
1010.152.26.9/3210.152.26.9 – 10.152.26.910.152.26.9
1110.152.26.10/3210.152.26.10 – 10.152.26.1010.152.26.10
1210.152.26.11/3210.152.26.11 – 10.152.26.1110.152.26.11
1310.152.26.12/3210.152.26.12 – 10.152.26.1210.152.26.12
1410.152.26.13/3210.152.26.13 – 10.152.26.1310.152.26.13
1510.152.26.14/3210.152.26.14 – 10.152.26.1410.152.26.14
1610.152.26.15/3210.152.26.15 – 10.152.26.1510.152.26.15
1710.152.26.16/3210.152.26.16 – 10.152.26.1610.152.26.16
1810.152.26.17/3210.152.26.17 – 10.152.26.1710.152.26.17
1910.152.26.18/3210.152.26.18 – 10.152.26.1810.152.26.18
2010.152.26.19/3210.152.26.19 – 10.152.26.1910.152.26.19
2110.152.26.20/3210.152.26.20 – 10.152.26.2010.152.26.20
2210.152.26.21/3210.152.26.21 – 10.152.26.2110.152.26.21
2310.152.26.22/3210.152.26.22 – 10.152.26.2210.152.26.22
2410.152.26.23/3210.152.26.23 – 10.152.26.2310.152.26.23
2510.152.26.24/3210.152.26.24 – 10.152.26.2410.152.26.24
2610.152.26.25/3210.152.26.25 – 10.152.26.2510.152.26.25
2710.152.26.26/3210.152.26.26 – 10.152.26.2610.152.26.26
2810.152.26.27/3210.152.26.27 – 10.152.26.2710.152.26.27
2910.152.26.28/3210.152.26.28 – 10.152.26.2810.152.26.28
3010.152.26.29/3210.152.26.29 – 10.152.26.2910.152.26.29
3110.152.26.30/3210.152.26.30 – 10.152.26.3010.152.26.30
3210.152.26.31/3210.152.26.31 – 10.152.26.3110.152.26.31
3310.152.26.32/3210.152.26.32 – 10.152.26.3210.152.26.32
3410.152.26.33/3210.152.26.33 – 10.152.26.3310.152.26.33
3510.152.26.34/3210.152.26.34 – 10.152.26.3410.152.26.34
3610.152.26.35/3210.152.26.35 – 10.152.26.3510.152.26.35
3710.152.26.36/3210.152.26.36 – 10.152.26.3610.152.26.36
3810.152.26.37/3210.152.26.37 – 10.152.26.3710.152.26.37
3910.152.26.38/3210.152.26.38 – 10.152.26.3810.152.26.38
4010.152.26.39/3210.152.26.39 – 10.152.26.3910.152.26.39
4110.152.26.40/3210.152.26.40 – 10.152.26.4010.152.26.40
4210.152.26.41/3210.152.26.41 – 10.152.26.4110.152.26.41
4310.152.26.42/3210.152.26.42 – 10.152.26.4210.152.26.42
4410.152.26.43/3210.152.26.43 – 10.152.26.4310.152.26.43
4510.152.26.44/3210.152.26.44 – 10.152.26.4410.152.26.44
4610.152.26.45/3210.152.26.45 – 10.152.26.4510.152.26.45
4710.152.26.46/3210.152.26.46 – 10.152.26.4610.152.26.46
4810.152.26.47/3210.152.26.47 – 10.152.26.4710.152.26.47
4910.152.26.48/3210.152.26.48 – 10.152.26.4810.152.26.48
5010.152.26.49/3210.152.26.49 – 10.152.26.4910.152.26.49
5110.152.26.50/3210.152.26.50 – 10.152.26.5010.152.26.50
5210.152.26.51/3210.152.26.51 – 10.152.26.5110.152.26.51
5310.152.26.52/3210.152.26.52 – 10.152.26.5210.152.26.52
5410.152.26.53/3210.152.26.53 – 10.152.26.5310.152.26.53
5510.152.26.54/3210.152.26.54 – 10.152.26.5410.152.26.54
5610.152.26.55/3210.152.26.55 – 10.152.26.5510.152.26.55
5710.152.26.56/3210.152.26.56 – 10.152.26.5610.152.26.56
5810.152.26.57/3210.152.26.57 – 10.152.26.5710.152.26.57
5910.152.26.58/3210.152.26.58 – 10.152.26.5810.152.26.58
6010.152.26.59/3210.152.26.59 – 10.152.26.5910.152.26.59
6110.152.26.60/3210.152.26.60 – 10.152.26.6010.152.26.60
6210.152.26.61/3210.152.26.61 – 10.152.26.6110.152.26.61
6310.152.26.62/3210.152.26.62 – 10.152.26.6210.152.26.62
6410.152.26.63/3210.152.26.63 – 10.152.26.6310.152.26.63
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /26
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.19264621
/27255.255.255.22432302 split →
/28255.255.255.24016144 split →
/29255.255.255.248868 split →
/30255.255.255.2524216 split →
/31255.255.255.2542232 split →
/32255.255.255.2551164 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →