ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.151.71.0/25
network10.151.71.0/25
broadcast10.151.71.127
first host10.151.71.1
last host10.151.71.126
subnet mask255.255.255.128
wildcard0.0.0.127
addresses128
usable hosts126
classA
ipcalc 10.151.71.0/25
address00001010.10010111.01000111.00000000
subnet mask11111111.11111111.11111111.10000000
network00001010.10010111.01000111.00000000
broadcast00001010.10010111.01000111.01111111
green = network part, grey = host part
hex0x0a974700
decimal177686272
reverse dns0.71.151.10.in-addr.arpa
ipv4-mapped::ffff:a97:4700

/25 split into /31 · 64 subnets

close ×
#networkhost rangebroadcast
110.151.71.0/3110.151.71.0 – 10.151.71.110.151.71.1
210.151.71.2/3110.151.71.2 – 10.151.71.310.151.71.3
310.151.71.4/3110.151.71.4 – 10.151.71.510.151.71.5
410.151.71.6/3110.151.71.6 – 10.151.71.710.151.71.7
510.151.71.8/3110.151.71.8 – 10.151.71.910.151.71.9
610.151.71.10/3110.151.71.10 – 10.151.71.1110.151.71.11
710.151.71.12/3110.151.71.12 – 10.151.71.1310.151.71.13
810.151.71.14/3110.151.71.14 – 10.151.71.1510.151.71.15
910.151.71.16/3110.151.71.16 – 10.151.71.1710.151.71.17
1010.151.71.18/3110.151.71.18 – 10.151.71.1910.151.71.19
1110.151.71.20/3110.151.71.20 – 10.151.71.2110.151.71.21
1210.151.71.22/3110.151.71.22 – 10.151.71.2310.151.71.23
1310.151.71.24/3110.151.71.24 – 10.151.71.2510.151.71.25
1410.151.71.26/3110.151.71.26 – 10.151.71.2710.151.71.27
1510.151.71.28/3110.151.71.28 – 10.151.71.2910.151.71.29
1610.151.71.30/3110.151.71.30 – 10.151.71.3110.151.71.31
1710.151.71.32/3110.151.71.32 – 10.151.71.3310.151.71.33
1810.151.71.34/3110.151.71.34 – 10.151.71.3510.151.71.35
1910.151.71.36/3110.151.71.36 – 10.151.71.3710.151.71.37
2010.151.71.38/3110.151.71.38 – 10.151.71.3910.151.71.39
2110.151.71.40/3110.151.71.40 – 10.151.71.4110.151.71.41
2210.151.71.42/3110.151.71.42 – 10.151.71.4310.151.71.43
2310.151.71.44/3110.151.71.44 – 10.151.71.4510.151.71.45
2410.151.71.46/3110.151.71.46 – 10.151.71.4710.151.71.47
2510.151.71.48/3110.151.71.48 – 10.151.71.4910.151.71.49
2610.151.71.50/3110.151.71.50 – 10.151.71.5110.151.71.51
2710.151.71.52/3110.151.71.52 – 10.151.71.5310.151.71.53
2810.151.71.54/3110.151.71.54 – 10.151.71.5510.151.71.55
2910.151.71.56/3110.151.71.56 – 10.151.71.5710.151.71.57
3010.151.71.58/3110.151.71.58 – 10.151.71.5910.151.71.59
3110.151.71.60/3110.151.71.60 – 10.151.71.6110.151.71.61
3210.151.71.62/3110.151.71.62 – 10.151.71.6310.151.71.63
3310.151.71.64/3110.151.71.64 – 10.151.71.6510.151.71.65
3410.151.71.66/3110.151.71.66 – 10.151.71.6710.151.71.67
3510.151.71.68/3110.151.71.68 – 10.151.71.6910.151.71.69
3610.151.71.70/3110.151.71.70 – 10.151.71.7110.151.71.71
3710.151.71.72/3110.151.71.72 – 10.151.71.7310.151.71.73
3810.151.71.74/3110.151.71.74 – 10.151.71.7510.151.71.75
3910.151.71.76/3110.151.71.76 – 10.151.71.7710.151.71.77
4010.151.71.78/3110.151.71.78 – 10.151.71.7910.151.71.79
4110.151.71.80/3110.151.71.80 – 10.151.71.8110.151.71.81
4210.151.71.82/3110.151.71.82 – 10.151.71.8310.151.71.83
4310.151.71.84/3110.151.71.84 – 10.151.71.8510.151.71.85
4410.151.71.86/3110.151.71.86 – 10.151.71.8710.151.71.87
4510.151.71.88/3110.151.71.88 – 10.151.71.8910.151.71.89
4610.151.71.90/3110.151.71.90 – 10.151.71.9110.151.71.91
4710.151.71.92/3110.151.71.92 – 10.151.71.9310.151.71.93
4810.151.71.94/3110.151.71.94 – 10.151.71.9510.151.71.95
4910.151.71.96/3110.151.71.96 – 10.151.71.9710.151.71.97
5010.151.71.98/3110.151.71.98 – 10.151.71.9910.151.71.99
5110.151.71.100/3110.151.71.100 – 10.151.71.10110.151.71.101
5210.151.71.102/3110.151.71.102 – 10.151.71.10310.151.71.103
5310.151.71.104/3110.151.71.104 – 10.151.71.10510.151.71.105
5410.151.71.106/3110.151.71.106 – 10.151.71.10710.151.71.107
5510.151.71.108/3110.151.71.108 – 10.151.71.10910.151.71.109
5610.151.71.110/3110.151.71.110 – 10.151.71.11110.151.71.111
5710.151.71.112/3110.151.71.112 – 10.151.71.11310.151.71.113
5810.151.71.114/3110.151.71.114 – 10.151.71.11510.151.71.115
5910.151.71.116/3110.151.71.116 – 10.151.71.11710.151.71.117
6010.151.71.118/3110.151.71.118 – 10.151.71.11910.151.71.119
6110.151.71.120/3110.151.71.120 – 10.151.71.12110.151.71.121
6210.151.71.122/3110.151.71.122 – 10.151.71.12310.151.71.123
6310.151.71.124/3110.151.71.124 – 10.151.71.12510.151.71.125
6410.151.71.126/3110.151.71.126 – 10.151.71.12710.151.71.127
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /25
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.1281281261
/26255.255.255.19264622 split →
/27255.255.255.22432304 split →
/28255.255.255.24016148 split →
/29255.255.255.2488616 split →
/30255.255.255.2524232 split →
/31255.255.255.2542264 split →
/32255.255.255.25511128 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →