ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
private IP (RFC 1918)10.151.67.0/24
network10.151.67.0/24
broadcast10.151.67.255
first host10.151.67.1
last host10.151.67.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.151.67.0/24
address00001010.10010111.01000011.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.10010111.01000011.00000000
broadcast00001010.10010111.01000011.11111111
green = network part, grey = host part
hex0x0a974300
decimal177685248
reverse dns0.67.151.10.in-addr.arpa
ipv4-mapped::ffff:a97:4300

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.151.67.0/3010.151.67.1 – 10.151.67.210.151.67.3
210.151.67.4/3010.151.67.5 – 10.151.67.610.151.67.7
310.151.67.8/3010.151.67.9 – 10.151.67.1010.151.67.11
410.151.67.12/3010.151.67.13 – 10.151.67.1410.151.67.15
510.151.67.16/3010.151.67.17 – 10.151.67.1810.151.67.19
610.151.67.20/3010.151.67.21 – 10.151.67.2210.151.67.23
710.151.67.24/3010.151.67.25 – 10.151.67.2610.151.67.27
810.151.67.28/3010.151.67.29 – 10.151.67.3010.151.67.31
910.151.67.32/3010.151.67.33 – 10.151.67.3410.151.67.35
1010.151.67.36/3010.151.67.37 – 10.151.67.3810.151.67.39
1110.151.67.40/3010.151.67.41 – 10.151.67.4210.151.67.43
1210.151.67.44/3010.151.67.45 – 10.151.67.4610.151.67.47
1310.151.67.48/3010.151.67.49 – 10.151.67.5010.151.67.51
1410.151.67.52/3010.151.67.53 – 10.151.67.5410.151.67.55
1510.151.67.56/3010.151.67.57 – 10.151.67.5810.151.67.59
1610.151.67.60/3010.151.67.61 – 10.151.67.6210.151.67.63
1710.151.67.64/3010.151.67.65 – 10.151.67.6610.151.67.67
1810.151.67.68/3010.151.67.69 – 10.151.67.7010.151.67.71
1910.151.67.72/3010.151.67.73 – 10.151.67.7410.151.67.75
2010.151.67.76/3010.151.67.77 – 10.151.67.7810.151.67.79
2110.151.67.80/3010.151.67.81 – 10.151.67.8210.151.67.83
2210.151.67.84/3010.151.67.85 – 10.151.67.8610.151.67.87
2310.151.67.88/3010.151.67.89 – 10.151.67.9010.151.67.91
2410.151.67.92/3010.151.67.93 – 10.151.67.9410.151.67.95
2510.151.67.96/3010.151.67.97 – 10.151.67.9810.151.67.99
2610.151.67.100/3010.151.67.101 – 10.151.67.10210.151.67.103
2710.151.67.104/3010.151.67.105 – 10.151.67.10610.151.67.107
2810.151.67.108/3010.151.67.109 – 10.151.67.11010.151.67.111
2910.151.67.112/3010.151.67.113 – 10.151.67.11410.151.67.115
3010.151.67.116/3010.151.67.117 – 10.151.67.11810.151.67.119
3110.151.67.120/3010.151.67.121 – 10.151.67.12210.151.67.123
3210.151.67.124/3010.151.67.125 – 10.151.67.12610.151.67.127
3310.151.67.128/3010.151.67.129 – 10.151.67.13010.151.67.131
3410.151.67.132/3010.151.67.133 – 10.151.67.13410.151.67.135
3510.151.67.136/3010.151.67.137 – 10.151.67.13810.151.67.139
3610.151.67.140/3010.151.67.141 – 10.151.67.14210.151.67.143
3710.151.67.144/3010.151.67.145 – 10.151.67.14610.151.67.147
3810.151.67.148/3010.151.67.149 – 10.151.67.15010.151.67.151
3910.151.67.152/3010.151.67.153 – 10.151.67.15410.151.67.155
4010.151.67.156/3010.151.67.157 – 10.151.67.15810.151.67.159
4110.151.67.160/3010.151.67.161 – 10.151.67.16210.151.67.163
4210.151.67.164/3010.151.67.165 – 10.151.67.16610.151.67.167
4310.151.67.168/3010.151.67.169 – 10.151.67.17010.151.67.171
4410.151.67.172/3010.151.67.173 – 10.151.67.17410.151.67.175
4510.151.67.176/3010.151.67.177 – 10.151.67.17810.151.67.179
4610.151.67.180/3010.151.67.181 – 10.151.67.18210.151.67.183
4710.151.67.184/3010.151.67.185 – 10.151.67.18610.151.67.187
4810.151.67.188/3010.151.67.189 – 10.151.67.19010.151.67.191
4910.151.67.192/3010.151.67.193 – 10.151.67.19410.151.67.195
5010.151.67.196/3010.151.67.197 – 10.151.67.19810.151.67.199
5110.151.67.200/3010.151.67.201 – 10.151.67.20210.151.67.203
5210.151.67.204/3010.151.67.205 – 10.151.67.20610.151.67.207
5310.151.67.208/3010.151.67.209 – 10.151.67.21010.151.67.211
5410.151.67.212/3010.151.67.213 – 10.151.67.21410.151.67.215
5510.151.67.216/3010.151.67.217 – 10.151.67.21810.151.67.219
5610.151.67.220/3010.151.67.221 – 10.151.67.22210.151.67.223
5710.151.67.224/3010.151.67.225 – 10.151.67.22610.151.67.227
5810.151.67.228/3010.151.67.229 – 10.151.67.23010.151.67.231
5910.151.67.232/3010.151.67.233 – 10.151.67.23410.151.67.235
6010.151.67.236/3010.151.67.237 – 10.151.67.23810.151.67.239
6110.151.67.240/3010.151.67.241 – 10.151.67.24210.151.67.243
6210.151.67.244/3010.151.67.245 – 10.151.67.24610.151.67.247
6310.151.67.248/3010.151.67.249 – 10.151.67.25010.151.67.251
6410.151.67.252/3010.151.67.253 – 10.151.67.25410.151.67.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →