ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
private IP (RFC 1918)10.15.192.0/19
network10.15.192.0/19
broadcast10.15.223.255
first host10.15.192.1
last host10.15.223.254
subnet mask255.255.224.0
wildcard0.0.31.255
addresses8,192
usable hosts8,190
classA
ipcalc 10.15.192.0/19
address00001010.00001111.11000000.00000000
subnet mask11111111.11111111.11100000.00000000
network00001010.00001111.11000000.00000000
broadcast00001010.00001111.11011111.11111111
green = network part, grey = host part
hex0x0a0fc000
decimal168804352
reverse dns0.192.15.10.in-addr.arpa
ipv4-mapped::ffff:a0f:c000

/19 split into /24 · 32 subnets

close ×
#networkhost rangebroadcast
110.15.192.0/2410.15.192.1 – 10.15.192.25410.15.192.255
210.15.193.0/2410.15.193.1 – 10.15.193.25410.15.193.255
310.15.194.0/2410.15.194.1 – 10.15.194.25410.15.194.255
410.15.195.0/2410.15.195.1 – 10.15.195.25410.15.195.255
510.15.196.0/2410.15.196.1 – 10.15.196.25410.15.196.255
610.15.197.0/2410.15.197.1 – 10.15.197.25410.15.197.255
710.15.198.0/2410.15.198.1 – 10.15.198.25410.15.198.255
810.15.199.0/2410.15.199.1 – 10.15.199.25410.15.199.255
910.15.200.0/2410.15.200.1 – 10.15.200.25410.15.200.255
1010.15.201.0/2410.15.201.1 – 10.15.201.25410.15.201.255
1110.15.202.0/2410.15.202.1 – 10.15.202.25410.15.202.255
1210.15.203.0/2410.15.203.1 – 10.15.203.25410.15.203.255
1310.15.204.0/2410.15.204.1 – 10.15.204.25410.15.204.255
1410.15.205.0/2410.15.205.1 – 10.15.205.25410.15.205.255
1510.15.206.0/2410.15.206.1 – 10.15.206.25410.15.206.255
1610.15.207.0/2410.15.207.1 – 10.15.207.25410.15.207.255
1710.15.208.0/2410.15.208.1 – 10.15.208.25410.15.208.255
1810.15.209.0/2410.15.209.1 – 10.15.209.25410.15.209.255
1910.15.210.0/2410.15.210.1 – 10.15.210.25410.15.210.255
2010.15.211.0/2410.15.211.1 – 10.15.211.25410.15.211.255
2110.15.212.0/2410.15.212.1 – 10.15.212.25410.15.212.255
2210.15.213.0/2410.15.213.1 – 10.15.213.25410.15.213.255
2310.15.214.0/2410.15.214.1 – 10.15.214.25410.15.214.255
2410.15.215.0/2410.15.215.1 – 10.15.215.25410.15.215.255
2510.15.216.0/2410.15.216.1 – 10.15.216.25410.15.216.255
2610.15.217.0/2410.15.217.1 – 10.15.217.25410.15.217.255
2710.15.218.0/2410.15.218.1 – 10.15.218.25410.15.218.255
2810.15.219.0/2410.15.219.1 – 10.15.219.25410.15.219.255
2910.15.220.0/2410.15.220.1 – 10.15.220.25410.15.220.255
3010.15.221.0/2410.15.221.1 – 10.15.221.25410.15.221.255
3110.15.222.0/2410.15.222.1 – 10.15.222.25410.15.222.255
3210.15.223.0/2410.15.223.1 – 10.15.223.25410.15.223.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /19
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,1901
/20255.255.240.04,0964,0942 split →
/21255.255.248.02,0482,0464 split →
/22255.255.252.01,0241,0228 split →
/23255.255.254.051251016 split →
/24255.255.255.025625432 split →
/25255.255.255.12812812664 split →
/26255.255.255.1926462128 split →
/27255.255.255.2243230256 split →
/28255.255.255.2401614512 split →
/29255.255.255.248861,024 split →
/30255.255.255.252422,048 split →
/31255.255.255.254224,096 split →
/32255.255.255.255118,192 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →