ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
private IP (RFC 1918)10.15.112.0/20
network10.15.112.0/20
broadcast10.15.127.255
first host10.15.112.1
last host10.15.127.254
subnet mask255.255.240.0
wildcard0.0.15.255
addresses4,096
usable hosts4,094
classA
ipcalc 10.15.112.0/20
address00001010.00001111.01110000.00000000
subnet mask11111111.11111111.11110000.00000000
network00001010.00001111.01110000.00000000
broadcast00001010.00001111.01111111.11111111
green = network part, grey = host part
hex0x0a0f7000
decimal168783872
reverse dns0.112.15.10.in-addr.arpa
ipv4-mapped::ffff:a0f:7000

/20 split into /25 · 32 subnets

close ×
#networkhost rangebroadcast
110.15.112.0/2510.15.112.1 – 10.15.112.12610.15.112.127
210.15.112.128/2510.15.112.129 – 10.15.112.25410.15.112.255
310.15.113.0/2510.15.113.1 – 10.15.113.12610.15.113.127
410.15.113.128/2510.15.113.129 – 10.15.113.25410.15.113.255
510.15.114.0/2510.15.114.1 – 10.15.114.12610.15.114.127
610.15.114.128/2510.15.114.129 – 10.15.114.25410.15.114.255
710.15.115.0/2510.15.115.1 – 10.15.115.12610.15.115.127
810.15.115.128/2510.15.115.129 – 10.15.115.25410.15.115.255
910.15.116.0/2510.15.116.1 – 10.15.116.12610.15.116.127
1010.15.116.128/2510.15.116.129 – 10.15.116.25410.15.116.255
1110.15.117.0/2510.15.117.1 – 10.15.117.12610.15.117.127
1210.15.117.128/2510.15.117.129 – 10.15.117.25410.15.117.255
1310.15.118.0/2510.15.118.1 – 10.15.118.12610.15.118.127
1410.15.118.128/2510.15.118.129 – 10.15.118.25410.15.118.255
1510.15.119.0/2510.15.119.1 – 10.15.119.12610.15.119.127
1610.15.119.128/2510.15.119.129 – 10.15.119.25410.15.119.255
1710.15.120.0/2510.15.120.1 – 10.15.120.12610.15.120.127
1810.15.120.128/2510.15.120.129 – 10.15.120.25410.15.120.255
1910.15.121.0/2510.15.121.1 – 10.15.121.12610.15.121.127
2010.15.121.128/2510.15.121.129 – 10.15.121.25410.15.121.255
2110.15.122.0/2510.15.122.1 – 10.15.122.12610.15.122.127
2210.15.122.128/2510.15.122.129 – 10.15.122.25410.15.122.255
2310.15.123.0/2510.15.123.1 – 10.15.123.12610.15.123.127
2410.15.123.128/2510.15.123.129 – 10.15.123.25410.15.123.255
2510.15.124.0/2510.15.124.1 – 10.15.124.12610.15.124.127
2610.15.124.128/2510.15.124.129 – 10.15.124.25410.15.124.255
2710.15.125.0/2510.15.125.1 – 10.15.125.12610.15.125.127
2810.15.125.128/2510.15.125.129 – 10.15.125.25410.15.125.255
2910.15.126.0/2510.15.126.1 – 10.15.126.12610.15.126.127
3010.15.126.128/2510.15.126.129 – 10.15.126.25410.15.126.255
3110.15.127.0/2510.15.127.1 – 10.15.127.12610.15.127.127
3210.15.127.128/2510.15.127.129 – 10.15.127.25410.15.127.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /20
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,0941
/21255.255.248.02,0482,0462 split →
/22255.255.252.01,0241,0224 split →
/23255.255.254.05125108 split →
/24255.255.255.025625416 split →
/25255.255.255.12812812632 split →
/26255.255.255.192646264 split →
/27255.255.255.2243230128 split →
/28255.255.255.2401614256 split →
/29255.255.255.24886512 split →
/30255.255.255.252421,024 split →
/31255.255.255.254222,048 split →
/32255.255.255.255114,096 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →