ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
private IP (RFC 1918)10.149.92.0/24
network10.149.92.0/24
broadcast10.149.92.255
first host10.149.92.1
last host10.149.92.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.149.92.0/24
address00001010.10010101.01011100.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.10010101.01011100.00000000
broadcast00001010.10010101.01011100.11111111
green = network part, grey = host part
hex0x0a955c00
decimal177560576
reverse dns0.92.149.10.in-addr.arpa
ipv4-mapped::ffff:a95:5c00

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.149.92.0/3010.149.92.1 – 10.149.92.210.149.92.3
210.149.92.4/3010.149.92.5 – 10.149.92.610.149.92.7
310.149.92.8/3010.149.92.9 – 10.149.92.1010.149.92.11
410.149.92.12/3010.149.92.13 – 10.149.92.1410.149.92.15
510.149.92.16/3010.149.92.17 – 10.149.92.1810.149.92.19
610.149.92.20/3010.149.92.21 – 10.149.92.2210.149.92.23
710.149.92.24/3010.149.92.25 – 10.149.92.2610.149.92.27
810.149.92.28/3010.149.92.29 – 10.149.92.3010.149.92.31
910.149.92.32/3010.149.92.33 – 10.149.92.3410.149.92.35
1010.149.92.36/3010.149.92.37 – 10.149.92.3810.149.92.39
1110.149.92.40/3010.149.92.41 – 10.149.92.4210.149.92.43
1210.149.92.44/3010.149.92.45 – 10.149.92.4610.149.92.47
1310.149.92.48/3010.149.92.49 – 10.149.92.5010.149.92.51
1410.149.92.52/3010.149.92.53 – 10.149.92.5410.149.92.55
1510.149.92.56/3010.149.92.57 – 10.149.92.5810.149.92.59
1610.149.92.60/3010.149.92.61 – 10.149.92.6210.149.92.63
1710.149.92.64/3010.149.92.65 – 10.149.92.6610.149.92.67
1810.149.92.68/3010.149.92.69 – 10.149.92.7010.149.92.71
1910.149.92.72/3010.149.92.73 – 10.149.92.7410.149.92.75
2010.149.92.76/3010.149.92.77 – 10.149.92.7810.149.92.79
2110.149.92.80/3010.149.92.81 – 10.149.92.8210.149.92.83
2210.149.92.84/3010.149.92.85 – 10.149.92.8610.149.92.87
2310.149.92.88/3010.149.92.89 – 10.149.92.9010.149.92.91
2410.149.92.92/3010.149.92.93 – 10.149.92.9410.149.92.95
2510.149.92.96/3010.149.92.97 – 10.149.92.9810.149.92.99
2610.149.92.100/3010.149.92.101 – 10.149.92.10210.149.92.103
2710.149.92.104/3010.149.92.105 – 10.149.92.10610.149.92.107
2810.149.92.108/3010.149.92.109 – 10.149.92.11010.149.92.111
2910.149.92.112/3010.149.92.113 – 10.149.92.11410.149.92.115
3010.149.92.116/3010.149.92.117 – 10.149.92.11810.149.92.119
3110.149.92.120/3010.149.92.121 – 10.149.92.12210.149.92.123
3210.149.92.124/3010.149.92.125 – 10.149.92.12610.149.92.127
3310.149.92.128/3010.149.92.129 – 10.149.92.13010.149.92.131
3410.149.92.132/3010.149.92.133 – 10.149.92.13410.149.92.135
3510.149.92.136/3010.149.92.137 – 10.149.92.13810.149.92.139
3610.149.92.140/3010.149.92.141 – 10.149.92.14210.149.92.143
3710.149.92.144/3010.149.92.145 – 10.149.92.14610.149.92.147
3810.149.92.148/3010.149.92.149 – 10.149.92.15010.149.92.151
3910.149.92.152/3010.149.92.153 – 10.149.92.15410.149.92.155
4010.149.92.156/3010.149.92.157 – 10.149.92.15810.149.92.159
4110.149.92.160/3010.149.92.161 – 10.149.92.16210.149.92.163
4210.149.92.164/3010.149.92.165 – 10.149.92.16610.149.92.167
4310.149.92.168/3010.149.92.169 – 10.149.92.17010.149.92.171
4410.149.92.172/3010.149.92.173 – 10.149.92.17410.149.92.175
4510.149.92.176/3010.149.92.177 – 10.149.92.17810.149.92.179
4610.149.92.180/3010.149.92.181 – 10.149.92.18210.149.92.183
4710.149.92.184/3010.149.92.185 – 10.149.92.18610.149.92.187
4810.149.92.188/3010.149.92.189 – 10.149.92.19010.149.92.191
4910.149.92.192/3010.149.92.193 – 10.149.92.19410.149.92.195
5010.149.92.196/3010.149.92.197 – 10.149.92.19810.149.92.199
5110.149.92.200/3010.149.92.201 – 10.149.92.20210.149.92.203
5210.149.92.204/3010.149.92.205 – 10.149.92.20610.149.92.207
5310.149.92.208/3010.149.92.209 – 10.149.92.21010.149.92.211
5410.149.92.212/3010.149.92.213 – 10.149.92.21410.149.92.215
5510.149.92.216/3010.149.92.217 – 10.149.92.21810.149.92.219
5610.149.92.220/3010.149.92.221 – 10.149.92.22210.149.92.223
5710.149.92.224/3010.149.92.225 – 10.149.92.22610.149.92.227
5810.149.92.228/3010.149.92.229 – 10.149.92.23010.149.92.231
5910.149.92.232/3010.149.92.233 – 10.149.92.23410.149.92.235
6010.149.92.236/3010.149.92.237 – 10.149.92.23810.149.92.239
6110.149.92.240/3010.149.92.241 – 10.149.92.24210.149.92.243
6210.149.92.244/3010.149.92.245 – 10.149.92.24610.149.92.247
6310.149.92.248/3010.149.92.249 – 10.149.92.25010.149.92.251
6410.149.92.252/3010.149.92.253 – 10.149.92.25410.149.92.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →