ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.149.83.80/28
network10.149.83.80/28
broadcast10.149.83.95
first host10.149.83.81
last host10.149.83.94
subnet mask255.255.255.240
wildcard0.0.0.15
addresses16
usable hosts14
classA
ipcalc 10.149.83.80/28
address00001010.10010101.01010011.01010000
subnet mask11111111.11111111.11111111.11110000
network00001010.10010101.01010011.01010000
broadcast00001010.10010101.01010011.01011111
green = network part, grey = host part
hex0x0a955350
decimal177558352
reverse dns80.83.149.10.in-addr.arpa
ipv4-mapped::ffff:a95:5350

/28 split into /32 · 16 subnets

close ×
#networkhost rangebroadcast
110.149.83.80/3210.149.83.80 – 10.149.83.8010.149.83.80
210.149.83.81/3210.149.83.81 – 10.149.83.8110.149.83.81
310.149.83.82/3210.149.83.82 – 10.149.83.8210.149.83.82
410.149.83.83/3210.149.83.83 – 10.149.83.8310.149.83.83
510.149.83.84/3210.149.83.84 – 10.149.83.8410.149.83.84
610.149.83.85/3210.149.83.85 – 10.149.83.8510.149.83.85
710.149.83.86/3210.149.83.86 – 10.149.83.8610.149.83.86
810.149.83.87/3210.149.83.87 – 10.149.83.8710.149.83.87
910.149.83.88/3210.149.83.88 – 10.149.83.8810.149.83.88
1010.149.83.89/3210.149.83.89 – 10.149.83.8910.149.83.89
1110.149.83.90/3210.149.83.90 – 10.149.83.9010.149.83.90
1210.149.83.91/3210.149.83.91 – 10.149.83.9110.149.83.91
1310.149.83.92/3210.149.83.92 – 10.149.83.9210.149.83.92
1410.149.83.93/3210.149.83.93 – 10.149.83.9310.149.83.93
1510.149.83.94/3210.149.83.94 – 10.149.83.9410.149.83.94
1610.149.83.95/3210.149.83.95 – 10.149.83.9510.149.83.95
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /28
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.1926462-
/27255.255.255.2243230-
/28255.255.255.24016141
/29255.255.255.248862 split →
/30255.255.255.252424 split →
/31255.255.255.254228 split →
/32255.255.255.2551116 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →