ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.149.64.0/19
network10.149.64.0/19
broadcast10.149.95.255
first host10.149.64.1
last host10.149.95.254
subnet mask255.255.224.0
wildcard0.0.31.255
addresses8,192
usable hosts8,190
classA
ipcalc 10.149.64.0/19
address00001010.10010101.01000000.00000000
subnet mask11111111.11111111.11100000.00000000
network00001010.10010101.01000000.00000000
broadcast00001010.10010101.01011111.11111111
green = network part, grey = host part
hex0x0a954000
decimal177553408
reverse dns0.64.149.10.in-addr.arpa
ipv4-mapped::ffff:a95:4000

/19 split into /24 · 32 subnets

close ×
#networkhost rangebroadcast
110.149.64.0/2410.149.64.1 – 10.149.64.25410.149.64.255
210.149.65.0/2410.149.65.1 – 10.149.65.25410.149.65.255
310.149.66.0/2410.149.66.1 – 10.149.66.25410.149.66.255
410.149.67.0/2410.149.67.1 – 10.149.67.25410.149.67.255
510.149.68.0/2410.149.68.1 – 10.149.68.25410.149.68.255
610.149.69.0/2410.149.69.1 – 10.149.69.25410.149.69.255
710.149.70.0/2410.149.70.1 – 10.149.70.25410.149.70.255
810.149.71.0/2410.149.71.1 – 10.149.71.25410.149.71.255
910.149.72.0/2410.149.72.1 – 10.149.72.25410.149.72.255
1010.149.73.0/2410.149.73.1 – 10.149.73.25410.149.73.255
1110.149.74.0/2410.149.74.1 – 10.149.74.25410.149.74.255
1210.149.75.0/2410.149.75.1 – 10.149.75.25410.149.75.255
1310.149.76.0/2410.149.76.1 – 10.149.76.25410.149.76.255
1410.149.77.0/2410.149.77.1 – 10.149.77.25410.149.77.255
1510.149.78.0/2410.149.78.1 – 10.149.78.25410.149.78.255
1610.149.79.0/2410.149.79.1 – 10.149.79.25410.149.79.255
1710.149.80.0/2410.149.80.1 – 10.149.80.25410.149.80.255
1810.149.81.0/2410.149.81.1 – 10.149.81.25410.149.81.255
1910.149.82.0/2410.149.82.1 – 10.149.82.25410.149.82.255
2010.149.83.0/2410.149.83.1 – 10.149.83.25410.149.83.255
2110.149.84.0/2410.149.84.1 – 10.149.84.25410.149.84.255
2210.149.85.0/2410.149.85.1 – 10.149.85.25410.149.85.255
2310.149.86.0/2410.149.86.1 – 10.149.86.25410.149.86.255
2410.149.87.0/2410.149.87.1 – 10.149.87.25410.149.87.255
2510.149.88.0/2410.149.88.1 – 10.149.88.25410.149.88.255
2610.149.89.0/2410.149.89.1 – 10.149.89.25410.149.89.255
2710.149.90.0/2410.149.90.1 – 10.149.90.25410.149.90.255
2810.149.91.0/2410.149.91.1 – 10.149.91.25410.149.91.255
2910.149.92.0/2410.149.92.1 – 10.149.92.25410.149.92.255
3010.149.93.0/2410.149.93.1 – 10.149.93.25410.149.93.255
3110.149.94.0/2410.149.94.1 – 10.149.94.25410.149.94.255
3210.149.95.0/2410.149.95.1 – 10.149.95.25410.149.95.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /19
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,1901
/20255.255.240.04,0964,0942 split →
/21255.255.248.02,0482,0464 split →
/22255.255.252.01,0241,0228 split →
/23255.255.254.051251016 split →
/24255.255.255.025625432 split →
/25255.255.255.12812812664 split →
/26255.255.255.1926462128 split →
/27255.255.255.2243230256 split →
/28255.255.255.2401614512 split →
/29255.255.255.248861,024 split →
/30255.255.255.252422,048 split →
/31255.255.255.254224,096 split →
/32255.255.255.255118,192 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →