ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
private IP (RFC 1918)10.149.52.0/24
network10.149.52.0/24
broadcast10.149.52.255
first host10.149.52.1
last host10.149.52.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.149.52.0/24
address00001010.10010101.00110100.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.10010101.00110100.00000000
broadcast00001010.10010101.00110100.11111111
green = network part, grey = host part
hex0x0a953400
decimal177550336
reverse dns0.52.149.10.in-addr.arpa
ipv4-mapped::ffff:a95:3400

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.149.52.0/3010.149.52.1 – 10.149.52.210.149.52.3
210.149.52.4/3010.149.52.5 – 10.149.52.610.149.52.7
310.149.52.8/3010.149.52.9 – 10.149.52.1010.149.52.11
410.149.52.12/3010.149.52.13 – 10.149.52.1410.149.52.15
510.149.52.16/3010.149.52.17 – 10.149.52.1810.149.52.19
610.149.52.20/3010.149.52.21 – 10.149.52.2210.149.52.23
710.149.52.24/3010.149.52.25 – 10.149.52.2610.149.52.27
810.149.52.28/3010.149.52.29 – 10.149.52.3010.149.52.31
910.149.52.32/3010.149.52.33 – 10.149.52.3410.149.52.35
1010.149.52.36/3010.149.52.37 – 10.149.52.3810.149.52.39
1110.149.52.40/3010.149.52.41 – 10.149.52.4210.149.52.43
1210.149.52.44/3010.149.52.45 – 10.149.52.4610.149.52.47
1310.149.52.48/3010.149.52.49 – 10.149.52.5010.149.52.51
1410.149.52.52/3010.149.52.53 – 10.149.52.5410.149.52.55
1510.149.52.56/3010.149.52.57 – 10.149.52.5810.149.52.59
1610.149.52.60/3010.149.52.61 – 10.149.52.6210.149.52.63
1710.149.52.64/3010.149.52.65 – 10.149.52.6610.149.52.67
1810.149.52.68/3010.149.52.69 – 10.149.52.7010.149.52.71
1910.149.52.72/3010.149.52.73 – 10.149.52.7410.149.52.75
2010.149.52.76/3010.149.52.77 – 10.149.52.7810.149.52.79
2110.149.52.80/3010.149.52.81 – 10.149.52.8210.149.52.83
2210.149.52.84/3010.149.52.85 – 10.149.52.8610.149.52.87
2310.149.52.88/3010.149.52.89 – 10.149.52.9010.149.52.91
2410.149.52.92/3010.149.52.93 – 10.149.52.9410.149.52.95
2510.149.52.96/3010.149.52.97 – 10.149.52.9810.149.52.99
2610.149.52.100/3010.149.52.101 – 10.149.52.10210.149.52.103
2710.149.52.104/3010.149.52.105 – 10.149.52.10610.149.52.107
2810.149.52.108/3010.149.52.109 – 10.149.52.11010.149.52.111
2910.149.52.112/3010.149.52.113 – 10.149.52.11410.149.52.115
3010.149.52.116/3010.149.52.117 – 10.149.52.11810.149.52.119
3110.149.52.120/3010.149.52.121 – 10.149.52.12210.149.52.123
3210.149.52.124/3010.149.52.125 – 10.149.52.12610.149.52.127
3310.149.52.128/3010.149.52.129 – 10.149.52.13010.149.52.131
3410.149.52.132/3010.149.52.133 – 10.149.52.13410.149.52.135
3510.149.52.136/3010.149.52.137 – 10.149.52.13810.149.52.139
3610.149.52.140/3010.149.52.141 – 10.149.52.14210.149.52.143
3710.149.52.144/3010.149.52.145 – 10.149.52.14610.149.52.147
3810.149.52.148/3010.149.52.149 – 10.149.52.15010.149.52.151
3910.149.52.152/3010.149.52.153 – 10.149.52.15410.149.52.155
4010.149.52.156/3010.149.52.157 – 10.149.52.15810.149.52.159
4110.149.52.160/3010.149.52.161 – 10.149.52.16210.149.52.163
4210.149.52.164/3010.149.52.165 – 10.149.52.16610.149.52.167
4310.149.52.168/3010.149.52.169 – 10.149.52.17010.149.52.171
4410.149.52.172/3010.149.52.173 – 10.149.52.17410.149.52.175
4510.149.52.176/3010.149.52.177 – 10.149.52.17810.149.52.179
4610.149.52.180/3010.149.52.181 – 10.149.52.18210.149.52.183
4710.149.52.184/3010.149.52.185 – 10.149.52.18610.149.52.187
4810.149.52.188/3010.149.52.189 – 10.149.52.19010.149.52.191
4910.149.52.192/3010.149.52.193 – 10.149.52.19410.149.52.195
5010.149.52.196/3010.149.52.197 – 10.149.52.19810.149.52.199
5110.149.52.200/3010.149.52.201 – 10.149.52.20210.149.52.203
5210.149.52.204/3010.149.52.205 – 10.149.52.20610.149.52.207
5310.149.52.208/3010.149.52.209 – 10.149.52.21010.149.52.211
5410.149.52.212/3010.149.52.213 – 10.149.52.21410.149.52.215
5510.149.52.216/3010.149.52.217 – 10.149.52.21810.149.52.219
5610.149.52.220/3010.149.52.221 – 10.149.52.22210.149.52.223
5710.149.52.224/3010.149.52.225 – 10.149.52.22610.149.52.227
5810.149.52.228/3010.149.52.229 – 10.149.52.23010.149.52.231
5910.149.52.232/3010.149.52.233 – 10.149.52.23410.149.52.235
6010.149.52.236/3010.149.52.237 – 10.149.52.23810.149.52.239
6110.149.52.240/3010.149.52.241 – 10.149.52.24210.149.52.243
6210.149.52.244/3010.149.52.245 – 10.149.52.24610.149.52.247
6310.149.52.248/3010.149.52.249 – 10.149.52.25010.149.52.251
6410.149.52.252/3010.149.52.253 – 10.149.52.25410.149.52.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →