ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
private IP (RFC 1918)10.149.13.0/24
network10.149.13.0/24
broadcast10.149.13.255
first host10.149.13.1
last host10.149.13.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.149.13.0/24
address00001010.10010101.00001101.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.10010101.00001101.00000000
broadcast00001010.10010101.00001101.11111111
green = network part, grey = host part
hex0x0a950d00
decimal177540352
reverse dns0.13.149.10.in-addr.arpa
ipv4-mapped::ffff:a95:d00

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.149.13.0/3010.149.13.1 – 10.149.13.210.149.13.3
210.149.13.4/3010.149.13.5 – 10.149.13.610.149.13.7
310.149.13.8/3010.149.13.9 – 10.149.13.1010.149.13.11
410.149.13.12/3010.149.13.13 – 10.149.13.1410.149.13.15
510.149.13.16/3010.149.13.17 – 10.149.13.1810.149.13.19
610.149.13.20/3010.149.13.21 – 10.149.13.2210.149.13.23
710.149.13.24/3010.149.13.25 – 10.149.13.2610.149.13.27
810.149.13.28/3010.149.13.29 – 10.149.13.3010.149.13.31
910.149.13.32/3010.149.13.33 – 10.149.13.3410.149.13.35
1010.149.13.36/3010.149.13.37 – 10.149.13.3810.149.13.39
1110.149.13.40/3010.149.13.41 – 10.149.13.4210.149.13.43
1210.149.13.44/3010.149.13.45 – 10.149.13.4610.149.13.47
1310.149.13.48/3010.149.13.49 – 10.149.13.5010.149.13.51
1410.149.13.52/3010.149.13.53 – 10.149.13.5410.149.13.55
1510.149.13.56/3010.149.13.57 – 10.149.13.5810.149.13.59
1610.149.13.60/3010.149.13.61 – 10.149.13.6210.149.13.63
1710.149.13.64/3010.149.13.65 – 10.149.13.6610.149.13.67
1810.149.13.68/3010.149.13.69 – 10.149.13.7010.149.13.71
1910.149.13.72/3010.149.13.73 – 10.149.13.7410.149.13.75
2010.149.13.76/3010.149.13.77 – 10.149.13.7810.149.13.79
2110.149.13.80/3010.149.13.81 – 10.149.13.8210.149.13.83
2210.149.13.84/3010.149.13.85 – 10.149.13.8610.149.13.87
2310.149.13.88/3010.149.13.89 – 10.149.13.9010.149.13.91
2410.149.13.92/3010.149.13.93 – 10.149.13.9410.149.13.95
2510.149.13.96/3010.149.13.97 – 10.149.13.9810.149.13.99
2610.149.13.100/3010.149.13.101 – 10.149.13.10210.149.13.103
2710.149.13.104/3010.149.13.105 – 10.149.13.10610.149.13.107
2810.149.13.108/3010.149.13.109 – 10.149.13.11010.149.13.111
2910.149.13.112/3010.149.13.113 – 10.149.13.11410.149.13.115
3010.149.13.116/3010.149.13.117 – 10.149.13.11810.149.13.119
3110.149.13.120/3010.149.13.121 – 10.149.13.12210.149.13.123
3210.149.13.124/3010.149.13.125 – 10.149.13.12610.149.13.127
3310.149.13.128/3010.149.13.129 – 10.149.13.13010.149.13.131
3410.149.13.132/3010.149.13.133 – 10.149.13.13410.149.13.135
3510.149.13.136/3010.149.13.137 – 10.149.13.13810.149.13.139
3610.149.13.140/3010.149.13.141 – 10.149.13.14210.149.13.143
3710.149.13.144/3010.149.13.145 – 10.149.13.14610.149.13.147
3810.149.13.148/3010.149.13.149 – 10.149.13.15010.149.13.151
3910.149.13.152/3010.149.13.153 – 10.149.13.15410.149.13.155
4010.149.13.156/3010.149.13.157 – 10.149.13.15810.149.13.159
4110.149.13.160/3010.149.13.161 – 10.149.13.16210.149.13.163
4210.149.13.164/3010.149.13.165 – 10.149.13.16610.149.13.167
4310.149.13.168/3010.149.13.169 – 10.149.13.17010.149.13.171
4410.149.13.172/3010.149.13.173 – 10.149.13.17410.149.13.175
4510.149.13.176/3010.149.13.177 – 10.149.13.17810.149.13.179
4610.149.13.180/3010.149.13.181 – 10.149.13.18210.149.13.183
4710.149.13.184/3010.149.13.185 – 10.149.13.18610.149.13.187
4810.149.13.188/3010.149.13.189 – 10.149.13.19010.149.13.191
4910.149.13.192/3010.149.13.193 – 10.149.13.19410.149.13.195
5010.149.13.196/3010.149.13.197 – 10.149.13.19810.149.13.199
5110.149.13.200/3010.149.13.201 – 10.149.13.20210.149.13.203
5210.149.13.204/3010.149.13.205 – 10.149.13.20610.149.13.207
5310.149.13.208/3010.149.13.209 – 10.149.13.21010.149.13.211
5410.149.13.212/3010.149.13.213 – 10.149.13.21410.149.13.215
5510.149.13.216/3010.149.13.217 – 10.149.13.21810.149.13.219
5610.149.13.220/3010.149.13.221 – 10.149.13.22210.149.13.223
5710.149.13.224/3010.149.13.225 – 10.149.13.22610.149.13.227
5810.149.13.228/3010.149.13.229 – 10.149.13.23010.149.13.231
5910.149.13.232/3010.149.13.233 – 10.149.13.23410.149.13.235
6010.149.13.236/3010.149.13.237 – 10.149.13.23810.149.13.239
6110.149.13.240/3010.149.13.241 – 10.149.13.24210.149.13.243
6210.149.13.244/3010.149.13.245 – 10.149.13.24610.149.13.247
6310.149.13.248/3010.149.13.249 – 10.149.13.25010.149.13.251
6410.149.13.252/3010.149.13.253 – 10.149.13.25410.149.13.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →