ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.141.78.0/26
network10.141.78.0/26
broadcast10.141.78.63
first host10.141.78.1
last host10.141.78.62
subnet mask255.255.255.192
wildcard0.0.0.63
addresses64
usable hosts62
classA
ipcalc 10.141.78.0/26
address00001010.10001101.01001110.00000000
subnet mask11111111.11111111.11111111.11000000
network00001010.10001101.01001110.00000000
broadcast00001010.10001101.01001110.00111111
green = network part, grey = host part
hex0x0a8d4e00
decimal177032704
reverse dns0.78.141.10.in-addr.arpa
ipv4-mapped::ffff:a8d:4e00

/26 split into /32 · 64 subnets

close ×
#networkhost rangebroadcast
110.141.78.0/3210.141.78.0 – 10.141.78.010.141.78.0
210.141.78.1/3210.141.78.1 – 10.141.78.110.141.78.1
310.141.78.2/3210.141.78.2 – 10.141.78.210.141.78.2
410.141.78.3/3210.141.78.3 – 10.141.78.310.141.78.3
510.141.78.4/3210.141.78.4 – 10.141.78.410.141.78.4
610.141.78.5/3210.141.78.5 – 10.141.78.510.141.78.5
710.141.78.6/3210.141.78.6 – 10.141.78.610.141.78.6
810.141.78.7/3210.141.78.7 – 10.141.78.710.141.78.7
910.141.78.8/3210.141.78.8 – 10.141.78.810.141.78.8
1010.141.78.9/3210.141.78.9 – 10.141.78.910.141.78.9
1110.141.78.10/3210.141.78.10 – 10.141.78.1010.141.78.10
1210.141.78.11/3210.141.78.11 – 10.141.78.1110.141.78.11
1310.141.78.12/3210.141.78.12 – 10.141.78.1210.141.78.12
1410.141.78.13/3210.141.78.13 – 10.141.78.1310.141.78.13
1510.141.78.14/3210.141.78.14 – 10.141.78.1410.141.78.14
1610.141.78.15/3210.141.78.15 – 10.141.78.1510.141.78.15
1710.141.78.16/3210.141.78.16 – 10.141.78.1610.141.78.16
1810.141.78.17/3210.141.78.17 – 10.141.78.1710.141.78.17
1910.141.78.18/3210.141.78.18 – 10.141.78.1810.141.78.18
2010.141.78.19/3210.141.78.19 – 10.141.78.1910.141.78.19
2110.141.78.20/3210.141.78.20 – 10.141.78.2010.141.78.20
2210.141.78.21/3210.141.78.21 – 10.141.78.2110.141.78.21
2310.141.78.22/3210.141.78.22 – 10.141.78.2210.141.78.22
2410.141.78.23/3210.141.78.23 – 10.141.78.2310.141.78.23
2510.141.78.24/3210.141.78.24 – 10.141.78.2410.141.78.24
2610.141.78.25/3210.141.78.25 – 10.141.78.2510.141.78.25
2710.141.78.26/3210.141.78.26 – 10.141.78.2610.141.78.26
2810.141.78.27/3210.141.78.27 – 10.141.78.2710.141.78.27
2910.141.78.28/3210.141.78.28 – 10.141.78.2810.141.78.28
3010.141.78.29/3210.141.78.29 – 10.141.78.2910.141.78.29
3110.141.78.30/3210.141.78.30 – 10.141.78.3010.141.78.30
3210.141.78.31/3210.141.78.31 – 10.141.78.3110.141.78.31
3310.141.78.32/3210.141.78.32 – 10.141.78.3210.141.78.32
3410.141.78.33/3210.141.78.33 – 10.141.78.3310.141.78.33
3510.141.78.34/3210.141.78.34 – 10.141.78.3410.141.78.34
3610.141.78.35/3210.141.78.35 – 10.141.78.3510.141.78.35
3710.141.78.36/3210.141.78.36 – 10.141.78.3610.141.78.36
3810.141.78.37/3210.141.78.37 – 10.141.78.3710.141.78.37
3910.141.78.38/3210.141.78.38 – 10.141.78.3810.141.78.38
4010.141.78.39/3210.141.78.39 – 10.141.78.3910.141.78.39
4110.141.78.40/3210.141.78.40 – 10.141.78.4010.141.78.40
4210.141.78.41/3210.141.78.41 – 10.141.78.4110.141.78.41
4310.141.78.42/3210.141.78.42 – 10.141.78.4210.141.78.42
4410.141.78.43/3210.141.78.43 – 10.141.78.4310.141.78.43
4510.141.78.44/3210.141.78.44 – 10.141.78.4410.141.78.44
4610.141.78.45/3210.141.78.45 – 10.141.78.4510.141.78.45
4710.141.78.46/3210.141.78.46 – 10.141.78.4610.141.78.46
4810.141.78.47/3210.141.78.47 – 10.141.78.4710.141.78.47
4910.141.78.48/3210.141.78.48 – 10.141.78.4810.141.78.48
5010.141.78.49/3210.141.78.49 – 10.141.78.4910.141.78.49
5110.141.78.50/3210.141.78.50 – 10.141.78.5010.141.78.50
5210.141.78.51/3210.141.78.51 – 10.141.78.5110.141.78.51
5310.141.78.52/3210.141.78.52 – 10.141.78.5210.141.78.52
5410.141.78.53/3210.141.78.53 – 10.141.78.5310.141.78.53
5510.141.78.54/3210.141.78.54 – 10.141.78.5410.141.78.54
5610.141.78.55/3210.141.78.55 – 10.141.78.5510.141.78.55
5710.141.78.56/3210.141.78.56 – 10.141.78.5610.141.78.56
5810.141.78.57/3210.141.78.57 – 10.141.78.5710.141.78.57
5910.141.78.58/3210.141.78.58 – 10.141.78.5810.141.78.58
6010.141.78.59/3210.141.78.59 – 10.141.78.5910.141.78.59
6110.141.78.60/3210.141.78.60 – 10.141.78.6010.141.78.60
6210.141.78.61/3210.141.78.61 – 10.141.78.6110.141.78.61
6310.141.78.62/3210.141.78.62 – 10.141.78.6210.141.78.62
6410.141.78.63/3210.141.78.63 – 10.141.78.6310.141.78.63
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /26
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.19264621
/27255.255.255.22432302 split →
/28255.255.255.24016144 split →
/29255.255.255.248868 split →
/30255.255.255.2524216 split →
/31255.255.255.2542232 split →
/32255.255.255.2551164 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →