IPv4 Subnet Calculator
Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.
private IP (RFC 1918)10.14.208.0/20
network10.14.208.0/20
broadcast10.14.223.255
first host10.14.208.1
last host10.14.223.254
subnet mask255.255.240.0
wildcard0.0.15.255
addresses4,096
usable hosts4,094
classA
ipcalc 10.14.208.0/20
address00001010.00001110.11010000.00000000
subnet mask11111111.11111111.11110000.00000000
network00001010.00001110.11010000.00000000
broadcast00001010.00001110.11011111.11111111
green = network part, grey = host part
hex0x0a0ed000
decimal168742912
reverse dns0.208.14.10.in-addr.arpa
ipv4-mapped::ffff:a0e:d000
/20 split into /25 · 32 subnets
close ×| # | network | host range | broadcast |
|---|---|---|---|
| 1 | 10.14.208.0/25 | 10.14.208.1 – 10.14.208.126 | 10.14.208.127 |
| 2 | 10.14.208.128/25 | 10.14.208.129 – 10.14.208.254 | 10.14.208.255 |
| 3 | 10.14.209.0/25 | 10.14.209.1 – 10.14.209.126 | 10.14.209.127 |
| 4 | 10.14.209.128/25 | 10.14.209.129 – 10.14.209.254 | 10.14.209.255 |
| 5 | 10.14.210.0/25 | 10.14.210.1 – 10.14.210.126 | 10.14.210.127 |
| 6 | 10.14.210.128/25 | 10.14.210.129 – 10.14.210.254 | 10.14.210.255 |
| 7 | 10.14.211.0/25 | 10.14.211.1 – 10.14.211.126 | 10.14.211.127 |
| 8 | 10.14.211.128/25 | 10.14.211.129 – 10.14.211.254 | 10.14.211.255 |
| 9 | 10.14.212.0/25 | 10.14.212.1 – 10.14.212.126 | 10.14.212.127 |
| 10 | 10.14.212.128/25 | 10.14.212.129 – 10.14.212.254 | 10.14.212.255 |
| 11 | 10.14.213.0/25 | 10.14.213.1 – 10.14.213.126 | 10.14.213.127 |
| 12 | 10.14.213.128/25 | 10.14.213.129 – 10.14.213.254 | 10.14.213.255 |
| 13 | 10.14.214.0/25 | 10.14.214.1 – 10.14.214.126 | 10.14.214.127 |
| 14 | 10.14.214.128/25 | 10.14.214.129 – 10.14.214.254 | 10.14.214.255 |
| 15 | 10.14.215.0/25 | 10.14.215.1 – 10.14.215.126 | 10.14.215.127 |
| 16 | 10.14.215.128/25 | 10.14.215.129 – 10.14.215.254 | 10.14.215.255 |
| 17 | 10.14.216.0/25 | 10.14.216.1 – 10.14.216.126 | 10.14.216.127 |
| 18 | 10.14.216.128/25 | 10.14.216.129 – 10.14.216.254 | 10.14.216.255 |
| 19 | 10.14.217.0/25 | 10.14.217.1 – 10.14.217.126 | 10.14.217.127 |
| 20 | 10.14.217.128/25 | 10.14.217.129 – 10.14.217.254 | 10.14.217.255 |
| 21 | 10.14.218.0/25 | 10.14.218.1 – 10.14.218.126 | 10.14.218.127 |
| 22 | 10.14.218.128/25 | 10.14.218.129 – 10.14.218.254 | 10.14.218.255 |
| 23 | 10.14.219.0/25 | 10.14.219.1 – 10.14.219.126 | 10.14.219.127 |
| 24 | 10.14.219.128/25 | 10.14.219.129 – 10.14.219.254 | 10.14.219.255 |
| 25 | 10.14.220.0/25 | 10.14.220.1 – 10.14.220.126 | 10.14.220.127 |
| 26 | 10.14.220.128/25 | 10.14.220.129 – 10.14.220.254 | 10.14.220.255 |
| 27 | 10.14.221.0/25 | 10.14.221.1 – 10.14.221.126 | 10.14.221.127 |
| 28 | 10.14.221.128/25 | 10.14.221.129 – 10.14.221.254 | 10.14.221.255 |
| 29 | 10.14.222.0/25 | 10.14.222.1 – 10.14.222.126 | 10.14.222.127 |
| 30 | 10.14.222.128/25 | 10.14.222.129 – 10.14.222.254 | 10.14.222.255 |
| 31 | 10.14.223.0/25 | 10.14.223.1 – 10.14.223.126 | 10.14.223.127 |
| 32 | 10.14.223.128/25 | 10.14.223.129 – 10.14.223.254 | 10.14.223.255 |
01 / table
IPv4 CIDR prefix table.
Click a prefix longer than your network to split it into subnets.
| prefix | subnet mask | addresses | hosts | in your /20 |
|---|---|---|---|---|
| /0 | 0.0.0.0 | 4,294,967,296 | 4,294,967,294 | - |
| /1 | 128.0.0.0 | 2,147,483,648 | 2,147,483,646 | - |
| /2 | 192.0.0.0 | 1,073,741,824 | 1,073,741,822 | - |
| /3 | 224.0.0.0 | 536,870,912 | 536,870,910 | - |
| /4 | 240.0.0.0 | 268,435,456 | 268,435,454 | - |
| /5 | 248.0.0.0 | 134,217,728 | 134,217,726 | - |
| /6 | 252.0.0.0 | 67,108,864 | 67,108,862 | - |
| /7 | 254.0.0.0 | 33,554,432 | 33,554,430 | - |
| /8 | 255.0.0.0 | 16,777,216 | 16,777,214 | - |
| /9 | 255.128.0.0 | 8,388,608 | 8,388,606 | - |
| /10 | 255.192.0.0 | 4,194,304 | 4,194,302 | - |
| /11 | 255.224.0.0 | 2,097,152 | 2,097,150 | - |
| /12 | 255.240.0.0 | 1,048,576 | 1,048,574 | - |
| /13 | 255.248.0.0 | 524,288 | 524,286 | - |
| /14 | 255.252.0.0 | 262,144 | 262,142 | - |
| /15 | 255.254.0.0 | 131,072 | 131,070 | - |
| /16 | 255.255.0.0 | 65,536 | 65,534 | - |
| /17 | 255.255.128.0 | 32,768 | 32,766 | - |
| /18 | 255.255.192.0 | 16,384 | 16,382 | - |
| /19 | 255.255.224.0 | 8,192 | 8,190 | - |
| /20 | 255.255.240.0 | 4,096 | 4,094 | 1 |
| /21 | 255.255.248.0 | 2,048 | 2,046 | 2 split → |
| /22 | 255.255.252.0 | 1,024 | 1,022 | 4 split → |
| /23 | 255.255.254.0 | 512 | 510 | 8 split → |
| /24 | 255.255.255.0 | 256 | 254 | 16 split → |
| /25 | 255.255.255.128 | 128 | 126 | 32 split → |
| /26 | 255.255.255.192 | 64 | 62 | 64 split → |
| /27 | 255.255.255.224 | 32 | 30 | 128 split → |
| /28 | 255.255.255.240 | 16 | 14 | 256 split → |
| /29 | 255.255.255.248 | 8 | 6 | 512 split → |
| /30 | 255.255.255.252 | 4 | 2 | 1,024 split → |
| /31 | 255.255.255.254 | 2 | 2 | 2,048 split → |
| /32 | 255.255.255.255 | 1 | 1 | 4,096 split → |
02 / faq
About this calculator.
How do I use this subnet calculator?
▼
Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.
Why are usable hosts always 2 fewer?
▼
The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.
Can I use it from a terminal?
▼
Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.