ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.136.95.0/24
network10.136.95.0/24
broadcast10.136.95.255
first host10.136.95.1
last host10.136.95.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.136.95.0/24
address00001010.10001000.01011111.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.10001000.01011111.00000000
broadcast00001010.10001000.01011111.11111111
green = network part, grey = host part
hex0x0a885f00
decimal176709376
reverse dns0.95.136.10.in-addr.arpa
ipv4-mapped::ffff:a88:5f00

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.136.95.0/3010.136.95.1 – 10.136.95.210.136.95.3
210.136.95.4/3010.136.95.5 – 10.136.95.610.136.95.7
310.136.95.8/3010.136.95.9 – 10.136.95.1010.136.95.11
410.136.95.12/3010.136.95.13 – 10.136.95.1410.136.95.15
510.136.95.16/3010.136.95.17 – 10.136.95.1810.136.95.19
610.136.95.20/3010.136.95.21 – 10.136.95.2210.136.95.23
710.136.95.24/3010.136.95.25 – 10.136.95.2610.136.95.27
810.136.95.28/3010.136.95.29 – 10.136.95.3010.136.95.31
910.136.95.32/3010.136.95.33 – 10.136.95.3410.136.95.35
1010.136.95.36/3010.136.95.37 – 10.136.95.3810.136.95.39
1110.136.95.40/3010.136.95.41 – 10.136.95.4210.136.95.43
1210.136.95.44/3010.136.95.45 – 10.136.95.4610.136.95.47
1310.136.95.48/3010.136.95.49 – 10.136.95.5010.136.95.51
1410.136.95.52/3010.136.95.53 – 10.136.95.5410.136.95.55
1510.136.95.56/3010.136.95.57 – 10.136.95.5810.136.95.59
1610.136.95.60/3010.136.95.61 – 10.136.95.6210.136.95.63
1710.136.95.64/3010.136.95.65 – 10.136.95.6610.136.95.67
1810.136.95.68/3010.136.95.69 – 10.136.95.7010.136.95.71
1910.136.95.72/3010.136.95.73 – 10.136.95.7410.136.95.75
2010.136.95.76/3010.136.95.77 – 10.136.95.7810.136.95.79
2110.136.95.80/3010.136.95.81 – 10.136.95.8210.136.95.83
2210.136.95.84/3010.136.95.85 – 10.136.95.8610.136.95.87
2310.136.95.88/3010.136.95.89 – 10.136.95.9010.136.95.91
2410.136.95.92/3010.136.95.93 – 10.136.95.9410.136.95.95
2510.136.95.96/3010.136.95.97 – 10.136.95.9810.136.95.99
2610.136.95.100/3010.136.95.101 – 10.136.95.10210.136.95.103
2710.136.95.104/3010.136.95.105 – 10.136.95.10610.136.95.107
2810.136.95.108/3010.136.95.109 – 10.136.95.11010.136.95.111
2910.136.95.112/3010.136.95.113 – 10.136.95.11410.136.95.115
3010.136.95.116/3010.136.95.117 – 10.136.95.11810.136.95.119
3110.136.95.120/3010.136.95.121 – 10.136.95.12210.136.95.123
3210.136.95.124/3010.136.95.125 – 10.136.95.12610.136.95.127
3310.136.95.128/3010.136.95.129 – 10.136.95.13010.136.95.131
3410.136.95.132/3010.136.95.133 – 10.136.95.13410.136.95.135
3510.136.95.136/3010.136.95.137 – 10.136.95.13810.136.95.139
3610.136.95.140/3010.136.95.141 – 10.136.95.14210.136.95.143
3710.136.95.144/3010.136.95.145 – 10.136.95.14610.136.95.147
3810.136.95.148/3010.136.95.149 – 10.136.95.15010.136.95.151
3910.136.95.152/3010.136.95.153 – 10.136.95.15410.136.95.155
4010.136.95.156/3010.136.95.157 – 10.136.95.15810.136.95.159
4110.136.95.160/3010.136.95.161 – 10.136.95.16210.136.95.163
4210.136.95.164/3010.136.95.165 – 10.136.95.16610.136.95.167
4310.136.95.168/3010.136.95.169 – 10.136.95.17010.136.95.171
4410.136.95.172/3010.136.95.173 – 10.136.95.17410.136.95.175
4510.136.95.176/3010.136.95.177 – 10.136.95.17810.136.95.179
4610.136.95.180/3010.136.95.181 – 10.136.95.18210.136.95.183
4710.136.95.184/3010.136.95.185 – 10.136.95.18610.136.95.187
4810.136.95.188/3010.136.95.189 – 10.136.95.19010.136.95.191
4910.136.95.192/3010.136.95.193 – 10.136.95.19410.136.95.195
5010.136.95.196/3010.136.95.197 – 10.136.95.19810.136.95.199
5110.136.95.200/3010.136.95.201 – 10.136.95.20210.136.95.203
5210.136.95.204/3010.136.95.205 – 10.136.95.20610.136.95.207
5310.136.95.208/3010.136.95.209 – 10.136.95.21010.136.95.211
5410.136.95.212/3010.136.95.213 – 10.136.95.21410.136.95.215
5510.136.95.216/3010.136.95.217 – 10.136.95.21810.136.95.219
5610.136.95.220/3010.136.95.221 – 10.136.95.22210.136.95.223
5710.136.95.224/3010.136.95.225 – 10.136.95.22610.136.95.227
5810.136.95.228/3010.136.95.229 – 10.136.95.23010.136.95.231
5910.136.95.232/3010.136.95.233 – 10.136.95.23410.136.95.235
6010.136.95.236/3010.136.95.237 – 10.136.95.23810.136.95.239
6110.136.95.240/3010.136.95.241 – 10.136.95.24210.136.95.243
6210.136.95.244/3010.136.95.245 – 10.136.95.24610.136.95.247
6310.136.95.248/3010.136.95.249 – 10.136.95.25010.136.95.251
6410.136.95.252/3010.136.95.253 – 10.136.95.25410.136.95.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →