ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.136.64.0/24
network10.136.64.0/24
broadcast10.136.64.255
first host10.136.64.1
last host10.136.64.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.136.64.0/24
address00001010.10001000.01000000.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.10001000.01000000.00000000
broadcast00001010.10001000.01000000.11111111
green = network part, grey = host part
hex0x0a884000
decimal176701440
reverse dns0.64.136.10.in-addr.arpa
ipv4-mapped::ffff:a88:4000

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.136.64.0/3010.136.64.1 – 10.136.64.210.136.64.3
210.136.64.4/3010.136.64.5 – 10.136.64.610.136.64.7
310.136.64.8/3010.136.64.9 – 10.136.64.1010.136.64.11
410.136.64.12/3010.136.64.13 – 10.136.64.1410.136.64.15
510.136.64.16/3010.136.64.17 – 10.136.64.1810.136.64.19
610.136.64.20/3010.136.64.21 – 10.136.64.2210.136.64.23
710.136.64.24/3010.136.64.25 – 10.136.64.2610.136.64.27
810.136.64.28/3010.136.64.29 – 10.136.64.3010.136.64.31
910.136.64.32/3010.136.64.33 – 10.136.64.3410.136.64.35
1010.136.64.36/3010.136.64.37 – 10.136.64.3810.136.64.39
1110.136.64.40/3010.136.64.41 – 10.136.64.4210.136.64.43
1210.136.64.44/3010.136.64.45 – 10.136.64.4610.136.64.47
1310.136.64.48/3010.136.64.49 – 10.136.64.5010.136.64.51
1410.136.64.52/3010.136.64.53 – 10.136.64.5410.136.64.55
1510.136.64.56/3010.136.64.57 – 10.136.64.5810.136.64.59
1610.136.64.60/3010.136.64.61 – 10.136.64.6210.136.64.63
1710.136.64.64/3010.136.64.65 – 10.136.64.6610.136.64.67
1810.136.64.68/3010.136.64.69 – 10.136.64.7010.136.64.71
1910.136.64.72/3010.136.64.73 – 10.136.64.7410.136.64.75
2010.136.64.76/3010.136.64.77 – 10.136.64.7810.136.64.79
2110.136.64.80/3010.136.64.81 – 10.136.64.8210.136.64.83
2210.136.64.84/3010.136.64.85 – 10.136.64.8610.136.64.87
2310.136.64.88/3010.136.64.89 – 10.136.64.9010.136.64.91
2410.136.64.92/3010.136.64.93 – 10.136.64.9410.136.64.95
2510.136.64.96/3010.136.64.97 – 10.136.64.9810.136.64.99
2610.136.64.100/3010.136.64.101 – 10.136.64.10210.136.64.103
2710.136.64.104/3010.136.64.105 – 10.136.64.10610.136.64.107
2810.136.64.108/3010.136.64.109 – 10.136.64.11010.136.64.111
2910.136.64.112/3010.136.64.113 – 10.136.64.11410.136.64.115
3010.136.64.116/3010.136.64.117 – 10.136.64.11810.136.64.119
3110.136.64.120/3010.136.64.121 – 10.136.64.12210.136.64.123
3210.136.64.124/3010.136.64.125 – 10.136.64.12610.136.64.127
3310.136.64.128/3010.136.64.129 – 10.136.64.13010.136.64.131
3410.136.64.132/3010.136.64.133 – 10.136.64.13410.136.64.135
3510.136.64.136/3010.136.64.137 – 10.136.64.13810.136.64.139
3610.136.64.140/3010.136.64.141 – 10.136.64.14210.136.64.143
3710.136.64.144/3010.136.64.145 – 10.136.64.14610.136.64.147
3810.136.64.148/3010.136.64.149 – 10.136.64.15010.136.64.151
3910.136.64.152/3010.136.64.153 – 10.136.64.15410.136.64.155
4010.136.64.156/3010.136.64.157 – 10.136.64.15810.136.64.159
4110.136.64.160/3010.136.64.161 – 10.136.64.16210.136.64.163
4210.136.64.164/3010.136.64.165 – 10.136.64.16610.136.64.167
4310.136.64.168/3010.136.64.169 – 10.136.64.17010.136.64.171
4410.136.64.172/3010.136.64.173 – 10.136.64.17410.136.64.175
4510.136.64.176/3010.136.64.177 – 10.136.64.17810.136.64.179
4610.136.64.180/3010.136.64.181 – 10.136.64.18210.136.64.183
4710.136.64.184/3010.136.64.185 – 10.136.64.18610.136.64.187
4810.136.64.188/3010.136.64.189 – 10.136.64.19010.136.64.191
4910.136.64.192/3010.136.64.193 – 10.136.64.19410.136.64.195
5010.136.64.196/3010.136.64.197 – 10.136.64.19810.136.64.199
5110.136.64.200/3010.136.64.201 – 10.136.64.20210.136.64.203
5210.136.64.204/3010.136.64.205 – 10.136.64.20610.136.64.207
5310.136.64.208/3010.136.64.209 – 10.136.64.21010.136.64.211
5410.136.64.212/3010.136.64.213 – 10.136.64.21410.136.64.215
5510.136.64.216/3010.136.64.217 – 10.136.64.21810.136.64.219
5610.136.64.220/3010.136.64.221 – 10.136.64.22210.136.64.223
5710.136.64.224/3010.136.64.225 – 10.136.64.22610.136.64.227
5810.136.64.228/3010.136.64.229 – 10.136.64.23010.136.64.231
5910.136.64.232/3010.136.64.233 – 10.136.64.23410.136.64.235
6010.136.64.236/3010.136.64.237 – 10.136.64.23810.136.64.239
6110.136.64.240/3010.136.64.241 – 10.136.64.24210.136.64.243
6210.136.64.244/3010.136.64.245 – 10.136.64.24610.136.64.247
6310.136.64.248/3010.136.64.249 – 10.136.64.25010.136.64.251
6410.136.64.252/3010.136.64.253 – 10.136.64.25410.136.64.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →