ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.136.20.0/22
network10.136.20.0/22
broadcast10.136.23.255
first host10.136.20.1
last host10.136.23.254
subnet mask255.255.252.0
wildcard0.0.3.255
addresses1,024
usable hosts1,022
classA
ipcalc 10.136.20.0/22
address00001010.10001000.00010100.00000000
subnet mask11111111.11111111.11111100.00000000
network00001010.10001000.00010100.00000000
broadcast00001010.10001000.00010111.11111111
green = network part, grey = host part
hex0x0a881400
decimal176690176
reverse dns0.20.136.10.in-addr.arpa
ipv4-mapped::ffff:a88:1400

/22 split into /28 · 64 subnets

close ×
#networkhost rangebroadcast
110.136.20.0/2810.136.20.1 – 10.136.20.1410.136.20.15
210.136.20.16/2810.136.20.17 – 10.136.20.3010.136.20.31
310.136.20.32/2810.136.20.33 – 10.136.20.4610.136.20.47
410.136.20.48/2810.136.20.49 – 10.136.20.6210.136.20.63
510.136.20.64/2810.136.20.65 – 10.136.20.7810.136.20.79
610.136.20.80/2810.136.20.81 – 10.136.20.9410.136.20.95
710.136.20.96/2810.136.20.97 – 10.136.20.11010.136.20.111
810.136.20.112/2810.136.20.113 – 10.136.20.12610.136.20.127
910.136.20.128/2810.136.20.129 – 10.136.20.14210.136.20.143
1010.136.20.144/2810.136.20.145 – 10.136.20.15810.136.20.159
1110.136.20.160/2810.136.20.161 – 10.136.20.17410.136.20.175
1210.136.20.176/2810.136.20.177 – 10.136.20.19010.136.20.191
1310.136.20.192/2810.136.20.193 – 10.136.20.20610.136.20.207
1410.136.20.208/2810.136.20.209 – 10.136.20.22210.136.20.223
1510.136.20.224/2810.136.20.225 – 10.136.20.23810.136.20.239
1610.136.20.240/2810.136.20.241 – 10.136.20.25410.136.20.255
1710.136.21.0/2810.136.21.1 – 10.136.21.1410.136.21.15
1810.136.21.16/2810.136.21.17 – 10.136.21.3010.136.21.31
1910.136.21.32/2810.136.21.33 – 10.136.21.4610.136.21.47
2010.136.21.48/2810.136.21.49 – 10.136.21.6210.136.21.63
2110.136.21.64/2810.136.21.65 – 10.136.21.7810.136.21.79
2210.136.21.80/2810.136.21.81 – 10.136.21.9410.136.21.95
2310.136.21.96/2810.136.21.97 – 10.136.21.11010.136.21.111
2410.136.21.112/2810.136.21.113 – 10.136.21.12610.136.21.127
2510.136.21.128/2810.136.21.129 – 10.136.21.14210.136.21.143
2610.136.21.144/2810.136.21.145 – 10.136.21.15810.136.21.159
2710.136.21.160/2810.136.21.161 – 10.136.21.17410.136.21.175
2810.136.21.176/2810.136.21.177 – 10.136.21.19010.136.21.191
2910.136.21.192/2810.136.21.193 – 10.136.21.20610.136.21.207
3010.136.21.208/2810.136.21.209 – 10.136.21.22210.136.21.223
3110.136.21.224/2810.136.21.225 – 10.136.21.23810.136.21.239
3210.136.21.240/2810.136.21.241 – 10.136.21.25410.136.21.255
3310.136.22.0/2810.136.22.1 – 10.136.22.1410.136.22.15
3410.136.22.16/2810.136.22.17 – 10.136.22.3010.136.22.31
3510.136.22.32/2810.136.22.33 – 10.136.22.4610.136.22.47
3610.136.22.48/2810.136.22.49 – 10.136.22.6210.136.22.63
3710.136.22.64/2810.136.22.65 – 10.136.22.7810.136.22.79
3810.136.22.80/2810.136.22.81 – 10.136.22.9410.136.22.95
3910.136.22.96/2810.136.22.97 – 10.136.22.11010.136.22.111
4010.136.22.112/2810.136.22.113 – 10.136.22.12610.136.22.127
4110.136.22.128/2810.136.22.129 – 10.136.22.14210.136.22.143
4210.136.22.144/2810.136.22.145 – 10.136.22.15810.136.22.159
4310.136.22.160/2810.136.22.161 – 10.136.22.17410.136.22.175
4410.136.22.176/2810.136.22.177 – 10.136.22.19010.136.22.191
4510.136.22.192/2810.136.22.193 – 10.136.22.20610.136.22.207
4610.136.22.208/2810.136.22.209 – 10.136.22.22210.136.22.223
4710.136.22.224/2810.136.22.225 – 10.136.22.23810.136.22.239
4810.136.22.240/2810.136.22.241 – 10.136.22.25410.136.22.255
4910.136.23.0/2810.136.23.1 – 10.136.23.1410.136.23.15
5010.136.23.16/2810.136.23.17 – 10.136.23.3010.136.23.31
5110.136.23.32/2810.136.23.33 – 10.136.23.4610.136.23.47
5210.136.23.48/2810.136.23.49 – 10.136.23.6210.136.23.63
5310.136.23.64/2810.136.23.65 – 10.136.23.7810.136.23.79
5410.136.23.80/2810.136.23.81 – 10.136.23.9410.136.23.95
5510.136.23.96/2810.136.23.97 – 10.136.23.11010.136.23.111
5610.136.23.112/2810.136.23.113 – 10.136.23.12610.136.23.127
5710.136.23.128/2810.136.23.129 – 10.136.23.14210.136.23.143
5810.136.23.144/2810.136.23.145 – 10.136.23.15810.136.23.159
5910.136.23.160/2810.136.23.161 – 10.136.23.17410.136.23.175
6010.136.23.176/2810.136.23.177 – 10.136.23.19010.136.23.191
6110.136.23.192/2810.136.23.193 – 10.136.23.20610.136.23.207
6210.136.23.208/2810.136.23.209 – 10.136.23.22210.136.23.223
6310.136.23.224/2810.136.23.225 – 10.136.23.23810.136.23.239
6410.136.23.240/2810.136.23.241 – 10.136.23.25410.136.23.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /22
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,0221
/23255.255.254.05125102 split →
/24255.255.255.02562544 split →
/25255.255.255.1281281268 split →
/26255.255.255.192646216 split →
/27255.255.255.224323032 split →
/28255.255.255.240161464 split →
/29255.255.255.24886128 split →
/30255.255.255.25242256 split →
/31255.255.255.25422512 split →
/32255.255.255.255111,024 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →