IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

Try:192.168.1.10/24 10.0.0.0/8 172.16.5.4/20 203.0.113.9/29

IPv6 calculator →

private IP (RFC 1918)10.131.8.80/28

network10.131.8.80/28

broadcast10.131.8.95

first host10.131.8.81

last host10.131.8.94

subnet mask255.255.255.240

wildcard0.0.0.15

addresses16

usable hosts14

classA

ipcalc 10.131.8.80/28

address00001010.10000011.00001000.01010000

subnet mask11111111.11111111.11111111.11110000

network00001010.10000011.00001000.01010000

broadcast00001010.10000011.00001000.01011111

green = network part, grey = host part

hex0x0a830850

decimal176359504

reverse dns80.8.131.10.in-addr.arpa

ipv4-mapped::ffff:a83:850

/28 split into /32 · 16 subnets

close ×

#	network	host range	broadcast
1	10.131.8.80/32	10.131.8.80 – 10.131.8.80	10.131.8.80
2	10.131.8.81/32	10.131.8.81 – 10.131.8.81	10.131.8.81
3	10.131.8.82/32	10.131.8.82 – 10.131.8.82	10.131.8.82
4	10.131.8.83/32	10.131.8.83 – 10.131.8.83	10.131.8.83
5	10.131.8.84/32	10.131.8.84 – 10.131.8.84	10.131.8.84
6	10.131.8.85/32	10.131.8.85 – 10.131.8.85	10.131.8.85
7	10.131.8.86/32	10.131.8.86 – 10.131.8.86	10.131.8.86
8	10.131.8.87/32	10.131.8.87 – 10.131.8.87	10.131.8.87
9	10.131.8.88/32	10.131.8.88 – 10.131.8.88	10.131.8.88
10	10.131.8.89/32	10.131.8.89 – 10.131.8.89	10.131.8.89
11	10.131.8.90/32	10.131.8.90 – 10.131.8.90	10.131.8.90
12	10.131.8.91/32	10.131.8.91 – 10.131.8.91	10.131.8.91
13	10.131.8.92/32	10.131.8.92 – 10.131.8.92	10.131.8.92
14	10.131.8.93/32	10.131.8.93 – 10.131.8.93	10.131.8.93
15	10.131.8.94/32	10.131.8.94 – 10.131.8.94	10.131.8.94
16	10.131.8.95/32	10.131.8.95 – 10.131.8.95	10.131.8.95

01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefix	subnet mask	addresses	hosts	in your /28
/0	0.0.0.0	4,294,967,296	4,294,967,294	-
/1	128.0.0.0	2,147,483,648	2,147,483,646	-
/2	192.0.0.0	1,073,741,824	1,073,741,822	-
/3	224.0.0.0	536,870,912	536,870,910	-
/4	240.0.0.0	268,435,456	268,435,454	-
/5	248.0.0.0	134,217,728	134,217,726	-
/6	252.0.0.0	67,108,864	67,108,862	-
/7	254.0.0.0	33,554,432	33,554,430	-
/8	255.0.0.0	16,777,216	16,777,214	-
/9	255.128.0.0	8,388,608	8,388,606	-
/10	255.192.0.0	4,194,304	4,194,302	-
/11	255.224.0.0	2,097,152	2,097,150	-
/12	255.240.0.0	1,048,576	1,048,574	-
/13	255.248.0.0	524,288	524,286	-
/14	255.252.0.0	262,144	262,142	-
/15	255.254.0.0	131,072	131,070	-
/16	255.255.0.0	65,536	65,534	-
/17	255.255.128.0	32,768	32,766	-
/18	255.255.192.0	16,384	16,382	-
/19	255.255.224.0	8,192	8,190	-
/20	255.255.240.0	4,096	4,094	-
/21	255.255.248.0	2,048	2,046	-
/22	255.255.252.0	1,024	1,022	-
/23	255.255.254.0	512	510	-
/24	255.255.255.0	256	254	-
/25	255.255.255.128	128	126	-
/26	255.255.255.192	64	62	-
/27	255.255.255.224	32	30	-
/28	255.255.255.240	16	14	1
/29	255.255.255.248	8	6	2 split →
/30	255.255.255.252	4	2	4 split →
/31	255.255.255.254	2	2	8 split →
/32	255.255.255.255	1	1	16 split →

02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →