ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
private IP (RFC 1918)10.131.68.0/24
network10.131.68.0/24
broadcast10.131.68.255
first host10.131.68.1
last host10.131.68.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.131.68.0/24
address00001010.10000011.01000100.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.10000011.01000100.00000000
broadcast00001010.10000011.01000100.11111111
green = network part, grey = host part
hex0x0a834400
decimal176374784
reverse dns0.68.131.10.in-addr.arpa
ipv4-mapped::ffff:a83:4400

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.131.68.0/3010.131.68.1 – 10.131.68.210.131.68.3
210.131.68.4/3010.131.68.5 – 10.131.68.610.131.68.7
310.131.68.8/3010.131.68.9 – 10.131.68.1010.131.68.11
410.131.68.12/3010.131.68.13 – 10.131.68.1410.131.68.15
510.131.68.16/3010.131.68.17 – 10.131.68.1810.131.68.19
610.131.68.20/3010.131.68.21 – 10.131.68.2210.131.68.23
710.131.68.24/3010.131.68.25 – 10.131.68.2610.131.68.27
810.131.68.28/3010.131.68.29 – 10.131.68.3010.131.68.31
910.131.68.32/3010.131.68.33 – 10.131.68.3410.131.68.35
1010.131.68.36/3010.131.68.37 – 10.131.68.3810.131.68.39
1110.131.68.40/3010.131.68.41 – 10.131.68.4210.131.68.43
1210.131.68.44/3010.131.68.45 – 10.131.68.4610.131.68.47
1310.131.68.48/3010.131.68.49 – 10.131.68.5010.131.68.51
1410.131.68.52/3010.131.68.53 – 10.131.68.5410.131.68.55
1510.131.68.56/3010.131.68.57 – 10.131.68.5810.131.68.59
1610.131.68.60/3010.131.68.61 – 10.131.68.6210.131.68.63
1710.131.68.64/3010.131.68.65 – 10.131.68.6610.131.68.67
1810.131.68.68/3010.131.68.69 – 10.131.68.7010.131.68.71
1910.131.68.72/3010.131.68.73 – 10.131.68.7410.131.68.75
2010.131.68.76/3010.131.68.77 – 10.131.68.7810.131.68.79
2110.131.68.80/3010.131.68.81 – 10.131.68.8210.131.68.83
2210.131.68.84/3010.131.68.85 – 10.131.68.8610.131.68.87
2310.131.68.88/3010.131.68.89 – 10.131.68.9010.131.68.91
2410.131.68.92/3010.131.68.93 – 10.131.68.9410.131.68.95
2510.131.68.96/3010.131.68.97 – 10.131.68.9810.131.68.99
2610.131.68.100/3010.131.68.101 – 10.131.68.10210.131.68.103
2710.131.68.104/3010.131.68.105 – 10.131.68.10610.131.68.107
2810.131.68.108/3010.131.68.109 – 10.131.68.11010.131.68.111
2910.131.68.112/3010.131.68.113 – 10.131.68.11410.131.68.115
3010.131.68.116/3010.131.68.117 – 10.131.68.11810.131.68.119
3110.131.68.120/3010.131.68.121 – 10.131.68.12210.131.68.123
3210.131.68.124/3010.131.68.125 – 10.131.68.12610.131.68.127
3310.131.68.128/3010.131.68.129 – 10.131.68.13010.131.68.131
3410.131.68.132/3010.131.68.133 – 10.131.68.13410.131.68.135
3510.131.68.136/3010.131.68.137 – 10.131.68.13810.131.68.139
3610.131.68.140/3010.131.68.141 – 10.131.68.14210.131.68.143
3710.131.68.144/3010.131.68.145 – 10.131.68.14610.131.68.147
3810.131.68.148/3010.131.68.149 – 10.131.68.15010.131.68.151
3910.131.68.152/3010.131.68.153 – 10.131.68.15410.131.68.155
4010.131.68.156/3010.131.68.157 – 10.131.68.15810.131.68.159
4110.131.68.160/3010.131.68.161 – 10.131.68.16210.131.68.163
4210.131.68.164/3010.131.68.165 – 10.131.68.16610.131.68.167
4310.131.68.168/3010.131.68.169 – 10.131.68.17010.131.68.171
4410.131.68.172/3010.131.68.173 – 10.131.68.17410.131.68.175
4510.131.68.176/3010.131.68.177 – 10.131.68.17810.131.68.179
4610.131.68.180/3010.131.68.181 – 10.131.68.18210.131.68.183
4710.131.68.184/3010.131.68.185 – 10.131.68.18610.131.68.187
4810.131.68.188/3010.131.68.189 – 10.131.68.19010.131.68.191
4910.131.68.192/3010.131.68.193 – 10.131.68.19410.131.68.195
5010.131.68.196/3010.131.68.197 – 10.131.68.19810.131.68.199
5110.131.68.200/3010.131.68.201 – 10.131.68.20210.131.68.203
5210.131.68.204/3010.131.68.205 – 10.131.68.20610.131.68.207
5310.131.68.208/3010.131.68.209 – 10.131.68.21010.131.68.211
5410.131.68.212/3010.131.68.213 – 10.131.68.21410.131.68.215
5510.131.68.216/3010.131.68.217 – 10.131.68.21810.131.68.219
5610.131.68.220/3010.131.68.221 – 10.131.68.22210.131.68.223
5710.131.68.224/3010.131.68.225 – 10.131.68.22610.131.68.227
5810.131.68.228/3010.131.68.229 – 10.131.68.23010.131.68.231
5910.131.68.232/3010.131.68.233 – 10.131.68.23410.131.68.235
6010.131.68.236/3010.131.68.237 – 10.131.68.23810.131.68.239
6110.131.68.240/3010.131.68.241 – 10.131.68.24210.131.68.243
6210.131.68.244/3010.131.68.245 – 10.131.68.24610.131.68.247
6310.131.68.248/3010.131.68.249 – 10.131.68.25010.131.68.251
6410.131.68.252/3010.131.68.253 – 10.131.68.25410.131.68.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →