ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
private IP (RFC 1918)10.131.64.0/24
network10.131.64.0/24
broadcast10.131.64.255
first host10.131.64.1
last host10.131.64.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.131.64.0/24
address00001010.10000011.01000000.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.10000011.01000000.00000000
broadcast00001010.10000011.01000000.11111111
green = network part, grey = host part
hex0x0a834000
decimal176373760
reverse dns0.64.131.10.in-addr.arpa
ipv4-mapped::ffff:a83:4000

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.131.64.0/3010.131.64.1 – 10.131.64.210.131.64.3
210.131.64.4/3010.131.64.5 – 10.131.64.610.131.64.7
310.131.64.8/3010.131.64.9 – 10.131.64.1010.131.64.11
410.131.64.12/3010.131.64.13 – 10.131.64.1410.131.64.15
510.131.64.16/3010.131.64.17 – 10.131.64.1810.131.64.19
610.131.64.20/3010.131.64.21 – 10.131.64.2210.131.64.23
710.131.64.24/3010.131.64.25 – 10.131.64.2610.131.64.27
810.131.64.28/3010.131.64.29 – 10.131.64.3010.131.64.31
910.131.64.32/3010.131.64.33 – 10.131.64.3410.131.64.35
1010.131.64.36/3010.131.64.37 – 10.131.64.3810.131.64.39
1110.131.64.40/3010.131.64.41 – 10.131.64.4210.131.64.43
1210.131.64.44/3010.131.64.45 – 10.131.64.4610.131.64.47
1310.131.64.48/3010.131.64.49 – 10.131.64.5010.131.64.51
1410.131.64.52/3010.131.64.53 – 10.131.64.5410.131.64.55
1510.131.64.56/3010.131.64.57 – 10.131.64.5810.131.64.59
1610.131.64.60/3010.131.64.61 – 10.131.64.6210.131.64.63
1710.131.64.64/3010.131.64.65 – 10.131.64.6610.131.64.67
1810.131.64.68/3010.131.64.69 – 10.131.64.7010.131.64.71
1910.131.64.72/3010.131.64.73 – 10.131.64.7410.131.64.75
2010.131.64.76/3010.131.64.77 – 10.131.64.7810.131.64.79
2110.131.64.80/3010.131.64.81 – 10.131.64.8210.131.64.83
2210.131.64.84/3010.131.64.85 – 10.131.64.8610.131.64.87
2310.131.64.88/3010.131.64.89 – 10.131.64.9010.131.64.91
2410.131.64.92/3010.131.64.93 – 10.131.64.9410.131.64.95
2510.131.64.96/3010.131.64.97 – 10.131.64.9810.131.64.99
2610.131.64.100/3010.131.64.101 – 10.131.64.10210.131.64.103
2710.131.64.104/3010.131.64.105 – 10.131.64.10610.131.64.107
2810.131.64.108/3010.131.64.109 – 10.131.64.11010.131.64.111
2910.131.64.112/3010.131.64.113 – 10.131.64.11410.131.64.115
3010.131.64.116/3010.131.64.117 – 10.131.64.11810.131.64.119
3110.131.64.120/3010.131.64.121 – 10.131.64.12210.131.64.123
3210.131.64.124/3010.131.64.125 – 10.131.64.12610.131.64.127
3310.131.64.128/3010.131.64.129 – 10.131.64.13010.131.64.131
3410.131.64.132/3010.131.64.133 – 10.131.64.13410.131.64.135
3510.131.64.136/3010.131.64.137 – 10.131.64.13810.131.64.139
3610.131.64.140/3010.131.64.141 – 10.131.64.14210.131.64.143
3710.131.64.144/3010.131.64.145 – 10.131.64.14610.131.64.147
3810.131.64.148/3010.131.64.149 – 10.131.64.15010.131.64.151
3910.131.64.152/3010.131.64.153 – 10.131.64.15410.131.64.155
4010.131.64.156/3010.131.64.157 – 10.131.64.15810.131.64.159
4110.131.64.160/3010.131.64.161 – 10.131.64.16210.131.64.163
4210.131.64.164/3010.131.64.165 – 10.131.64.16610.131.64.167
4310.131.64.168/3010.131.64.169 – 10.131.64.17010.131.64.171
4410.131.64.172/3010.131.64.173 – 10.131.64.17410.131.64.175
4510.131.64.176/3010.131.64.177 – 10.131.64.17810.131.64.179
4610.131.64.180/3010.131.64.181 – 10.131.64.18210.131.64.183
4710.131.64.184/3010.131.64.185 – 10.131.64.18610.131.64.187
4810.131.64.188/3010.131.64.189 – 10.131.64.19010.131.64.191
4910.131.64.192/3010.131.64.193 – 10.131.64.19410.131.64.195
5010.131.64.196/3010.131.64.197 – 10.131.64.19810.131.64.199
5110.131.64.200/3010.131.64.201 – 10.131.64.20210.131.64.203
5210.131.64.204/3010.131.64.205 – 10.131.64.20610.131.64.207
5310.131.64.208/3010.131.64.209 – 10.131.64.21010.131.64.211
5410.131.64.212/3010.131.64.213 – 10.131.64.21410.131.64.215
5510.131.64.216/3010.131.64.217 – 10.131.64.21810.131.64.219
5610.131.64.220/3010.131.64.221 – 10.131.64.22210.131.64.223
5710.131.64.224/3010.131.64.225 – 10.131.64.22610.131.64.227
5810.131.64.228/3010.131.64.229 – 10.131.64.23010.131.64.231
5910.131.64.232/3010.131.64.233 – 10.131.64.23410.131.64.235
6010.131.64.236/3010.131.64.237 – 10.131.64.23810.131.64.239
6110.131.64.240/3010.131.64.241 – 10.131.64.24210.131.64.243
6210.131.64.244/3010.131.64.245 – 10.131.64.24610.131.64.247
6310.131.64.248/3010.131.64.249 – 10.131.64.25010.131.64.251
6410.131.64.252/3010.131.64.253 – 10.131.64.25410.131.64.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →