ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.131.37.0/24
network10.131.37.0/24
broadcast10.131.37.255
first host10.131.37.1
last host10.131.37.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.131.37.0/24
address00001010.10000011.00100101.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.10000011.00100101.00000000
broadcast00001010.10000011.00100101.11111111
green = network part, grey = host part
hex0x0a832500
decimal176366848
reverse dns0.37.131.10.in-addr.arpa
ipv4-mapped::ffff:a83:2500

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.131.37.0/3010.131.37.1 – 10.131.37.210.131.37.3
210.131.37.4/3010.131.37.5 – 10.131.37.610.131.37.7
310.131.37.8/3010.131.37.9 – 10.131.37.1010.131.37.11
410.131.37.12/3010.131.37.13 – 10.131.37.1410.131.37.15
510.131.37.16/3010.131.37.17 – 10.131.37.1810.131.37.19
610.131.37.20/3010.131.37.21 – 10.131.37.2210.131.37.23
710.131.37.24/3010.131.37.25 – 10.131.37.2610.131.37.27
810.131.37.28/3010.131.37.29 – 10.131.37.3010.131.37.31
910.131.37.32/3010.131.37.33 – 10.131.37.3410.131.37.35
1010.131.37.36/3010.131.37.37 – 10.131.37.3810.131.37.39
1110.131.37.40/3010.131.37.41 – 10.131.37.4210.131.37.43
1210.131.37.44/3010.131.37.45 – 10.131.37.4610.131.37.47
1310.131.37.48/3010.131.37.49 – 10.131.37.5010.131.37.51
1410.131.37.52/3010.131.37.53 – 10.131.37.5410.131.37.55
1510.131.37.56/3010.131.37.57 – 10.131.37.5810.131.37.59
1610.131.37.60/3010.131.37.61 – 10.131.37.6210.131.37.63
1710.131.37.64/3010.131.37.65 – 10.131.37.6610.131.37.67
1810.131.37.68/3010.131.37.69 – 10.131.37.7010.131.37.71
1910.131.37.72/3010.131.37.73 – 10.131.37.7410.131.37.75
2010.131.37.76/3010.131.37.77 – 10.131.37.7810.131.37.79
2110.131.37.80/3010.131.37.81 – 10.131.37.8210.131.37.83
2210.131.37.84/3010.131.37.85 – 10.131.37.8610.131.37.87
2310.131.37.88/3010.131.37.89 – 10.131.37.9010.131.37.91
2410.131.37.92/3010.131.37.93 – 10.131.37.9410.131.37.95
2510.131.37.96/3010.131.37.97 – 10.131.37.9810.131.37.99
2610.131.37.100/3010.131.37.101 – 10.131.37.10210.131.37.103
2710.131.37.104/3010.131.37.105 – 10.131.37.10610.131.37.107
2810.131.37.108/3010.131.37.109 – 10.131.37.11010.131.37.111
2910.131.37.112/3010.131.37.113 – 10.131.37.11410.131.37.115
3010.131.37.116/3010.131.37.117 – 10.131.37.11810.131.37.119
3110.131.37.120/3010.131.37.121 – 10.131.37.12210.131.37.123
3210.131.37.124/3010.131.37.125 – 10.131.37.12610.131.37.127
3310.131.37.128/3010.131.37.129 – 10.131.37.13010.131.37.131
3410.131.37.132/3010.131.37.133 – 10.131.37.13410.131.37.135
3510.131.37.136/3010.131.37.137 – 10.131.37.13810.131.37.139
3610.131.37.140/3010.131.37.141 – 10.131.37.14210.131.37.143
3710.131.37.144/3010.131.37.145 – 10.131.37.14610.131.37.147
3810.131.37.148/3010.131.37.149 – 10.131.37.15010.131.37.151
3910.131.37.152/3010.131.37.153 – 10.131.37.15410.131.37.155
4010.131.37.156/3010.131.37.157 – 10.131.37.15810.131.37.159
4110.131.37.160/3010.131.37.161 – 10.131.37.16210.131.37.163
4210.131.37.164/3010.131.37.165 – 10.131.37.16610.131.37.167
4310.131.37.168/3010.131.37.169 – 10.131.37.17010.131.37.171
4410.131.37.172/3010.131.37.173 – 10.131.37.17410.131.37.175
4510.131.37.176/3010.131.37.177 – 10.131.37.17810.131.37.179
4610.131.37.180/3010.131.37.181 – 10.131.37.18210.131.37.183
4710.131.37.184/3010.131.37.185 – 10.131.37.18610.131.37.187
4810.131.37.188/3010.131.37.189 – 10.131.37.19010.131.37.191
4910.131.37.192/3010.131.37.193 – 10.131.37.19410.131.37.195
5010.131.37.196/3010.131.37.197 – 10.131.37.19810.131.37.199
5110.131.37.200/3010.131.37.201 – 10.131.37.20210.131.37.203
5210.131.37.204/3010.131.37.205 – 10.131.37.20610.131.37.207
5310.131.37.208/3010.131.37.209 – 10.131.37.21010.131.37.211
5410.131.37.212/3010.131.37.213 – 10.131.37.21410.131.37.215
5510.131.37.216/3010.131.37.217 – 10.131.37.21810.131.37.219
5610.131.37.220/3010.131.37.221 – 10.131.37.22210.131.37.223
5710.131.37.224/3010.131.37.225 – 10.131.37.22610.131.37.227
5810.131.37.228/3010.131.37.229 – 10.131.37.23010.131.37.231
5910.131.37.232/3010.131.37.233 – 10.131.37.23410.131.37.235
6010.131.37.236/3010.131.37.237 – 10.131.37.23810.131.37.239
6110.131.37.240/3010.131.37.241 – 10.131.37.24210.131.37.243
6210.131.37.244/3010.131.37.245 – 10.131.37.24610.131.37.247
6310.131.37.248/3010.131.37.249 – 10.131.37.25010.131.37.251
6410.131.37.252/3010.131.37.253 – 10.131.37.25410.131.37.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →