ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.131.20.0/24
network10.131.20.0/24
broadcast10.131.20.255
first host10.131.20.1
last host10.131.20.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.131.20.0/24
address00001010.10000011.00010100.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.10000011.00010100.00000000
broadcast00001010.10000011.00010100.11111111
green = network part, grey = host part
hex0x0a831400
decimal176362496
reverse dns0.20.131.10.in-addr.arpa
ipv4-mapped::ffff:a83:1400

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.131.20.0/3010.131.20.1 – 10.131.20.210.131.20.3
210.131.20.4/3010.131.20.5 – 10.131.20.610.131.20.7
310.131.20.8/3010.131.20.9 – 10.131.20.1010.131.20.11
410.131.20.12/3010.131.20.13 – 10.131.20.1410.131.20.15
510.131.20.16/3010.131.20.17 – 10.131.20.1810.131.20.19
610.131.20.20/3010.131.20.21 – 10.131.20.2210.131.20.23
710.131.20.24/3010.131.20.25 – 10.131.20.2610.131.20.27
810.131.20.28/3010.131.20.29 – 10.131.20.3010.131.20.31
910.131.20.32/3010.131.20.33 – 10.131.20.3410.131.20.35
1010.131.20.36/3010.131.20.37 – 10.131.20.3810.131.20.39
1110.131.20.40/3010.131.20.41 – 10.131.20.4210.131.20.43
1210.131.20.44/3010.131.20.45 – 10.131.20.4610.131.20.47
1310.131.20.48/3010.131.20.49 – 10.131.20.5010.131.20.51
1410.131.20.52/3010.131.20.53 – 10.131.20.5410.131.20.55
1510.131.20.56/3010.131.20.57 – 10.131.20.5810.131.20.59
1610.131.20.60/3010.131.20.61 – 10.131.20.6210.131.20.63
1710.131.20.64/3010.131.20.65 – 10.131.20.6610.131.20.67
1810.131.20.68/3010.131.20.69 – 10.131.20.7010.131.20.71
1910.131.20.72/3010.131.20.73 – 10.131.20.7410.131.20.75
2010.131.20.76/3010.131.20.77 – 10.131.20.7810.131.20.79
2110.131.20.80/3010.131.20.81 – 10.131.20.8210.131.20.83
2210.131.20.84/3010.131.20.85 – 10.131.20.8610.131.20.87
2310.131.20.88/3010.131.20.89 – 10.131.20.9010.131.20.91
2410.131.20.92/3010.131.20.93 – 10.131.20.9410.131.20.95
2510.131.20.96/3010.131.20.97 – 10.131.20.9810.131.20.99
2610.131.20.100/3010.131.20.101 – 10.131.20.10210.131.20.103
2710.131.20.104/3010.131.20.105 – 10.131.20.10610.131.20.107
2810.131.20.108/3010.131.20.109 – 10.131.20.11010.131.20.111
2910.131.20.112/3010.131.20.113 – 10.131.20.11410.131.20.115
3010.131.20.116/3010.131.20.117 – 10.131.20.11810.131.20.119
3110.131.20.120/3010.131.20.121 – 10.131.20.12210.131.20.123
3210.131.20.124/3010.131.20.125 – 10.131.20.12610.131.20.127
3310.131.20.128/3010.131.20.129 – 10.131.20.13010.131.20.131
3410.131.20.132/3010.131.20.133 – 10.131.20.13410.131.20.135
3510.131.20.136/3010.131.20.137 – 10.131.20.13810.131.20.139
3610.131.20.140/3010.131.20.141 – 10.131.20.14210.131.20.143
3710.131.20.144/3010.131.20.145 – 10.131.20.14610.131.20.147
3810.131.20.148/3010.131.20.149 – 10.131.20.15010.131.20.151
3910.131.20.152/3010.131.20.153 – 10.131.20.15410.131.20.155
4010.131.20.156/3010.131.20.157 – 10.131.20.15810.131.20.159
4110.131.20.160/3010.131.20.161 – 10.131.20.16210.131.20.163
4210.131.20.164/3010.131.20.165 – 10.131.20.16610.131.20.167
4310.131.20.168/3010.131.20.169 – 10.131.20.17010.131.20.171
4410.131.20.172/3010.131.20.173 – 10.131.20.17410.131.20.175
4510.131.20.176/3010.131.20.177 – 10.131.20.17810.131.20.179
4610.131.20.180/3010.131.20.181 – 10.131.20.18210.131.20.183
4710.131.20.184/3010.131.20.185 – 10.131.20.18610.131.20.187
4810.131.20.188/3010.131.20.189 – 10.131.20.19010.131.20.191
4910.131.20.192/3010.131.20.193 – 10.131.20.19410.131.20.195
5010.131.20.196/3010.131.20.197 – 10.131.20.19810.131.20.199
5110.131.20.200/3010.131.20.201 – 10.131.20.20210.131.20.203
5210.131.20.204/3010.131.20.205 – 10.131.20.20610.131.20.207
5310.131.20.208/3010.131.20.209 – 10.131.20.21010.131.20.211
5410.131.20.212/3010.131.20.213 – 10.131.20.21410.131.20.215
5510.131.20.216/3010.131.20.217 – 10.131.20.21810.131.20.219
5610.131.20.220/3010.131.20.221 – 10.131.20.22210.131.20.223
5710.131.20.224/3010.131.20.225 – 10.131.20.22610.131.20.227
5810.131.20.228/3010.131.20.229 – 10.131.20.23010.131.20.231
5910.131.20.232/3010.131.20.233 – 10.131.20.23410.131.20.235
6010.131.20.236/3010.131.20.237 – 10.131.20.23810.131.20.239
6110.131.20.240/3010.131.20.241 – 10.131.20.24210.131.20.243
6210.131.20.244/3010.131.20.245 – 10.131.20.24610.131.20.247
6310.131.20.248/3010.131.20.249 – 10.131.20.25010.131.20.251
6410.131.20.252/3010.131.20.253 – 10.131.20.25410.131.20.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →