ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
private IP (RFC 1918)10.131.20.0/23
network10.131.20.0/23
broadcast10.131.21.255
first host10.131.20.1
last host10.131.21.254
subnet mask255.255.254.0
wildcard0.0.1.255
addresses512
usable hosts510
classA
ipcalc 10.131.20.0/23
address00001010.10000011.00010100.00000000
subnet mask11111111.11111111.11111110.00000000
network00001010.10000011.00010100.00000000
broadcast00001010.10000011.00010101.11111111
green = network part, grey = host part
hex0x0a831400
decimal176362496
reverse dns0.20.131.10.in-addr.arpa
ipv4-mapped::ffff:a83:1400

/23 split into /29 · 64 subnets

close ×
#networkhost rangebroadcast
110.131.20.0/2910.131.20.1 – 10.131.20.610.131.20.7
210.131.20.8/2910.131.20.9 – 10.131.20.1410.131.20.15
310.131.20.16/2910.131.20.17 – 10.131.20.2210.131.20.23
410.131.20.24/2910.131.20.25 – 10.131.20.3010.131.20.31
510.131.20.32/2910.131.20.33 – 10.131.20.3810.131.20.39
610.131.20.40/2910.131.20.41 – 10.131.20.4610.131.20.47
710.131.20.48/2910.131.20.49 – 10.131.20.5410.131.20.55
810.131.20.56/2910.131.20.57 – 10.131.20.6210.131.20.63
910.131.20.64/2910.131.20.65 – 10.131.20.7010.131.20.71
1010.131.20.72/2910.131.20.73 – 10.131.20.7810.131.20.79
1110.131.20.80/2910.131.20.81 – 10.131.20.8610.131.20.87
1210.131.20.88/2910.131.20.89 – 10.131.20.9410.131.20.95
1310.131.20.96/2910.131.20.97 – 10.131.20.10210.131.20.103
1410.131.20.104/2910.131.20.105 – 10.131.20.11010.131.20.111
1510.131.20.112/2910.131.20.113 – 10.131.20.11810.131.20.119
1610.131.20.120/2910.131.20.121 – 10.131.20.12610.131.20.127
1710.131.20.128/2910.131.20.129 – 10.131.20.13410.131.20.135
1810.131.20.136/2910.131.20.137 – 10.131.20.14210.131.20.143
1910.131.20.144/2910.131.20.145 – 10.131.20.15010.131.20.151
2010.131.20.152/2910.131.20.153 – 10.131.20.15810.131.20.159
2110.131.20.160/2910.131.20.161 – 10.131.20.16610.131.20.167
2210.131.20.168/2910.131.20.169 – 10.131.20.17410.131.20.175
2310.131.20.176/2910.131.20.177 – 10.131.20.18210.131.20.183
2410.131.20.184/2910.131.20.185 – 10.131.20.19010.131.20.191
2510.131.20.192/2910.131.20.193 – 10.131.20.19810.131.20.199
2610.131.20.200/2910.131.20.201 – 10.131.20.20610.131.20.207
2710.131.20.208/2910.131.20.209 – 10.131.20.21410.131.20.215
2810.131.20.216/2910.131.20.217 – 10.131.20.22210.131.20.223
2910.131.20.224/2910.131.20.225 – 10.131.20.23010.131.20.231
3010.131.20.232/2910.131.20.233 – 10.131.20.23810.131.20.239
3110.131.20.240/2910.131.20.241 – 10.131.20.24610.131.20.247
3210.131.20.248/2910.131.20.249 – 10.131.20.25410.131.20.255
3310.131.21.0/2910.131.21.1 – 10.131.21.610.131.21.7
3410.131.21.8/2910.131.21.9 – 10.131.21.1410.131.21.15
3510.131.21.16/2910.131.21.17 – 10.131.21.2210.131.21.23
3610.131.21.24/2910.131.21.25 – 10.131.21.3010.131.21.31
3710.131.21.32/2910.131.21.33 – 10.131.21.3810.131.21.39
3810.131.21.40/2910.131.21.41 – 10.131.21.4610.131.21.47
3910.131.21.48/2910.131.21.49 – 10.131.21.5410.131.21.55
4010.131.21.56/2910.131.21.57 – 10.131.21.6210.131.21.63
4110.131.21.64/2910.131.21.65 – 10.131.21.7010.131.21.71
4210.131.21.72/2910.131.21.73 – 10.131.21.7810.131.21.79
4310.131.21.80/2910.131.21.81 – 10.131.21.8610.131.21.87
4410.131.21.88/2910.131.21.89 – 10.131.21.9410.131.21.95
4510.131.21.96/2910.131.21.97 – 10.131.21.10210.131.21.103
4610.131.21.104/2910.131.21.105 – 10.131.21.11010.131.21.111
4710.131.21.112/2910.131.21.113 – 10.131.21.11810.131.21.119
4810.131.21.120/2910.131.21.121 – 10.131.21.12610.131.21.127
4910.131.21.128/2910.131.21.129 – 10.131.21.13410.131.21.135
5010.131.21.136/2910.131.21.137 – 10.131.21.14210.131.21.143
5110.131.21.144/2910.131.21.145 – 10.131.21.15010.131.21.151
5210.131.21.152/2910.131.21.153 – 10.131.21.15810.131.21.159
5310.131.21.160/2910.131.21.161 – 10.131.21.16610.131.21.167
5410.131.21.168/2910.131.21.169 – 10.131.21.17410.131.21.175
5510.131.21.176/2910.131.21.177 – 10.131.21.18210.131.21.183
5610.131.21.184/2910.131.21.185 – 10.131.21.19010.131.21.191
5710.131.21.192/2910.131.21.193 – 10.131.21.19810.131.21.199
5810.131.21.200/2910.131.21.201 – 10.131.21.20610.131.21.207
5910.131.21.208/2910.131.21.209 – 10.131.21.21410.131.21.215
6010.131.21.216/2910.131.21.217 – 10.131.21.22210.131.21.223
6110.131.21.224/2910.131.21.225 – 10.131.21.23010.131.21.231
6210.131.21.232/2910.131.21.233 – 10.131.21.23810.131.21.239
6310.131.21.240/2910.131.21.241 – 10.131.21.24610.131.21.247
6410.131.21.248/2910.131.21.249 – 10.131.21.25410.131.21.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /23
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.05125101
/24255.255.255.02562542 split →
/25255.255.255.1281281264 split →
/26255.255.255.19264628 split →
/27255.255.255.224323016 split →
/28255.255.255.240161432 split →
/29255.255.255.2488664 split →
/30255.255.255.25242128 split →
/31255.255.255.25422256 split →
/32255.255.255.25511512 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →