ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
private IP (RFC 1918)10.131.14.0/24
network10.131.14.0/24
broadcast10.131.14.255
first host10.131.14.1
last host10.131.14.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.131.14.0/24
address00001010.10000011.00001110.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.10000011.00001110.00000000
broadcast00001010.10000011.00001110.11111111
green = network part, grey = host part
hex0x0a830e00
decimal176360960
reverse dns0.14.131.10.in-addr.arpa
ipv4-mapped::ffff:a83:e00

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.131.14.0/3010.131.14.1 – 10.131.14.210.131.14.3
210.131.14.4/3010.131.14.5 – 10.131.14.610.131.14.7
310.131.14.8/3010.131.14.9 – 10.131.14.1010.131.14.11
410.131.14.12/3010.131.14.13 – 10.131.14.1410.131.14.15
510.131.14.16/3010.131.14.17 – 10.131.14.1810.131.14.19
610.131.14.20/3010.131.14.21 – 10.131.14.2210.131.14.23
710.131.14.24/3010.131.14.25 – 10.131.14.2610.131.14.27
810.131.14.28/3010.131.14.29 – 10.131.14.3010.131.14.31
910.131.14.32/3010.131.14.33 – 10.131.14.3410.131.14.35
1010.131.14.36/3010.131.14.37 – 10.131.14.3810.131.14.39
1110.131.14.40/3010.131.14.41 – 10.131.14.4210.131.14.43
1210.131.14.44/3010.131.14.45 – 10.131.14.4610.131.14.47
1310.131.14.48/3010.131.14.49 – 10.131.14.5010.131.14.51
1410.131.14.52/3010.131.14.53 – 10.131.14.5410.131.14.55
1510.131.14.56/3010.131.14.57 – 10.131.14.5810.131.14.59
1610.131.14.60/3010.131.14.61 – 10.131.14.6210.131.14.63
1710.131.14.64/3010.131.14.65 – 10.131.14.6610.131.14.67
1810.131.14.68/3010.131.14.69 – 10.131.14.7010.131.14.71
1910.131.14.72/3010.131.14.73 – 10.131.14.7410.131.14.75
2010.131.14.76/3010.131.14.77 – 10.131.14.7810.131.14.79
2110.131.14.80/3010.131.14.81 – 10.131.14.8210.131.14.83
2210.131.14.84/3010.131.14.85 – 10.131.14.8610.131.14.87
2310.131.14.88/3010.131.14.89 – 10.131.14.9010.131.14.91
2410.131.14.92/3010.131.14.93 – 10.131.14.9410.131.14.95
2510.131.14.96/3010.131.14.97 – 10.131.14.9810.131.14.99
2610.131.14.100/3010.131.14.101 – 10.131.14.10210.131.14.103
2710.131.14.104/3010.131.14.105 – 10.131.14.10610.131.14.107
2810.131.14.108/3010.131.14.109 – 10.131.14.11010.131.14.111
2910.131.14.112/3010.131.14.113 – 10.131.14.11410.131.14.115
3010.131.14.116/3010.131.14.117 – 10.131.14.11810.131.14.119
3110.131.14.120/3010.131.14.121 – 10.131.14.12210.131.14.123
3210.131.14.124/3010.131.14.125 – 10.131.14.12610.131.14.127
3310.131.14.128/3010.131.14.129 – 10.131.14.13010.131.14.131
3410.131.14.132/3010.131.14.133 – 10.131.14.13410.131.14.135
3510.131.14.136/3010.131.14.137 – 10.131.14.13810.131.14.139
3610.131.14.140/3010.131.14.141 – 10.131.14.14210.131.14.143
3710.131.14.144/3010.131.14.145 – 10.131.14.14610.131.14.147
3810.131.14.148/3010.131.14.149 – 10.131.14.15010.131.14.151
3910.131.14.152/3010.131.14.153 – 10.131.14.15410.131.14.155
4010.131.14.156/3010.131.14.157 – 10.131.14.15810.131.14.159
4110.131.14.160/3010.131.14.161 – 10.131.14.16210.131.14.163
4210.131.14.164/3010.131.14.165 – 10.131.14.16610.131.14.167
4310.131.14.168/3010.131.14.169 – 10.131.14.17010.131.14.171
4410.131.14.172/3010.131.14.173 – 10.131.14.17410.131.14.175
4510.131.14.176/3010.131.14.177 – 10.131.14.17810.131.14.179
4610.131.14.180/3010.131.14.181 – 10.131.14.18210.131.14.183
4710.131.14.184/3010.131.14.185 – 10.131.14.18610.131.14.187
4810.131.14.188/3010.131.14.189 – 10.131.14.19010.131.14.191
4910.131.14.192/3010.131.14.193 – 10.131.14.19410.131.14.195
5010.131.14.196/3010.131.14.197 – 10.131.14.19810.131.14.199
5110.131.14.200/3010.131.14.201 – 10.131.14.20210.131.14.203
5210.131.14.204/3010.131.14.205 – 10.131.14.20610.131.14.207
5310.131.14.208/3010.131.14.209 – 10.131.14.21010.131.14.211
5410.131.14.212/3010.131.14.213 – 10.131.14.21410.131.14.215
5510.131.14.216/3010.131.14.217 – 10.131.14.21810.131.14.219
5610.131.14.220/3010.131.14.221 – 10.131.14.22210.131.14.223
5710.131.14.224/3010.131.14.225 – 10.131.14.22610.131.14.227
5810.131.14.228/3010.131.14.229 – 10.131.14.23010.131.14.231
5910.131.14.232/3010.131.14.233 – 10.131.14.23410.131.14.235
6010.131.14.236/3010.131.14.237 – 10.131.14.23810.131.14.239
6110.131.14.240/3010.131.14.241 – 10.131.14.24210.131.14.243
6210.131.14.244/3010.131.14.245 – 10.131.14.24610.131.14.247
6310.131.14.248/3010.131.14.249 – 10.131.14.25010.131.14.251
6410.131.14.252/3010.131.14.253 – 10.131.14.25410.131.14.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →