ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
private IP (RFC 1918)10.131.136.0/22
network10.131.136.0/22
broadcast10.131.139.255
first host10.131.136.1
last host10.131.139.254
subnet mask255.255.252.0
wildcard0.0.3.255
addresses1,024
usable hosts1,022
classA
ipcalc 10.131.136.0/22
address00001010.10000011.10001000.00000000
subnet mask11111111.11111111.11111100.00000000
network00001010.10000011.10001000.00000000
broadcast00001010.10000011.10001011.11111111
green = network part, grey = host part
hex0x0a838800
decimal176392192
reverse dns0.136.131.10.in-addr.arpa
ipv4-mapped::ffff:a83:8800

/22 split into /27 · 32 subnets

close ×
#networkhost rangebroadcast
110.131.136.0/2710.131.136.1 – 10.131.136.3010.131.136.31
210.131.136.32/2710.131.136.33 – 10.131.136.6210.131.136.63
310.131.136.64/2710.131.136.65 – 10.131.136.9410.131.136.95
410.131.136.96/2710.131.136.97 – 10.131.136.12610.131.136.127
510.131.136.128/2710.131.136.129 – 10.131.136.15810.131.136.159
610.131.136.160/2710.131.136.161 – 10.131.136.19010.131.136.191
710.131.136.192/2710.131.136.193 – 10.131.136.22210.131.136.223
810.131.136.224/2710.131.136.225 – 10.131.136.25410.131.136.255
910.131.137.0/2710.131.137.1 – 10.131.137.3010.131.137.31
1010.131.137.32/2710.131.137.33 – 10.131.137.6210.131.137.63
1110.131.137.64/2710.131.137.65 – 10.131.137.9410.131.137.95
1210.131.137.96/2710.131.137.97 – 10.131.137.12610.131.137.127
1310.131.137.128/2710.131.137.129 – 10.131.137.15810.131.137.159
1410.131.137.160/2710.131.137.161 – 10.131.137.19010.131.137.191
1510.131.137.192/2710.131.137.193 – 10.131.137.22210.131.137.223
1610.131.137.224/2710.131.137.225 – 10.131.137.25410.131.137.255
1710.131.138.0/2710.131.138.1 – 10.131.138.3010.131.138.31
1810.131.138.32/2710.131.138.33 – 10.131.138.6210.131.138.63
1910.131.138.64/2710.131.138.65 – 10.131.138.9410.131.138.95
2010.131.138.96/2710.131.138.97 – 10.131.138.12610.131.138.127
2110.131.138.128/2710.131.138.129 – 10.131.138.15810.131.138.159
2210.131.138.160/2710.131.138.161 – 10.131.138.19010.131.138.191
2310.131.138.192/2710.131.138.193 – 10.131.138.22210.131.138.223
2410.131.138.224/2710.131.138.225 – 10.131.138.25410.131.138.255
2510.131.139.0/2710.131.139.1 – 10.131.139.3010.131.139.31
2610.131.139.32/2710.131.139.33 – 10.131.139.6210.131.139.63
2710.131.139.64/2710.131.139.65 – 10.131.139.9410.131.139.95
2810.131.139.96/2710.131.139.97 – 10.131.139.12610.131.139.127
2910.131.139.128/2710.131.139.129 – 10.131.139.15810.131.139.159
3010.131.139.160/2710.131.139.161 – 10.131.139.19010.131.139.191
3110.131.139.192/2710.131.139.193 – 10.131.139.22210.131.139.223
3210.131.139.224/2710.131.139.225 – 10.131.139.25410.131.139.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /22
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,0221
/23255.255.254.05125102 split →
/24255.255.255.02562544 split →
/25255.255.255.1281281268 split →
/26255.255.255.192646216 split →
/27255.255.255.224323032 split →
/28255.255.255.240161464 split →
/29255.255.255.24886128 split →
/30255.255.255.25242256 split →
/31255.255.255.25422512 split →
/32255.255.255.255111,024 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →