ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.13.232.64/26
network10.13.232.64/26
broadcast10.13.232.127
first host10.13.232.65
last host10.13.232.126
subnet mask255.255.255.192
wildcard0.0.0.63
addresses64
usable hosts62
classA
ipcalc 10.13.232.64/26
address00001010.00001101.11101000.01000000
subnet mask11111111.11111111.11111111.11000000
network00001010.00001101.11101000.01000000
broadcast00001010.00001101.11101000.01111111
green = network part, grey = host part
hex0x0a0de840
decimal168683584
reverse dns64.232.13.10.in-addr.arpa
ipv4-mapped::ffff:a0d:e840

/26 split into /32 · 64 subnets

close ×
#networkhost rangebroadcast
110.13.232.64/3210.13.232.64 – 10.13.232.6410.13.232.64
210.13.232.65/3210.13.232.65 – 10.13.232.6510.13.232.65
310.13.232.66/3210.13.232.66 – 10.13.232.6610.13.232.66
410.13.232.67/3210.13.232.67 – 10.13.232.6710.13.232.67
510.13.232.68/3210.13.232.68 – 10.13.232.6810.13.232.68
610.13.232.69/3210.13.232.69 – 10.13.232.6910.13.232.69
710.13.232.70/3210.13.232.70 – 10.13.232.7010.13.232.70
810.13.232.71/3210.13.232.71 – 10.13.232.7110.13.232.71
910.13.232.72/3210.13.232.72 – 10.13.232.7210.13.232.72
1010.13.232.73/3210.13.232.73 – 10.13.232.7310.13.232.73
1110.13.232.74/3210.13.232.74 – 10.13.232.7410.13.232.74
1210.13.232.75/3210.13.232.75 – 10.13.232.7510.13.232.75
1310.13.232.76/3210.13.232.76 – 10.13.232.7610.13.232.76
1410.13.232.77/3210.13.232.77 – 10.13.232.7710.13.232.77
1510.13.232.78/3210.13.232.78 – 10.13.232.7810.13.232.78
1610.13.232.79/3210.13.232.79 – 10.13.232.7910.13.232.79
1710.13.232.80/3210.13.232.80 – 10.13.232.8010.13.232.80
1810.13.232.81/3210.13.232.81 – 10.13.232.8110.13.232.81
1910.13.232.82/3210.13.232.82 – 10.13.232.8210.13.232.82
2010.13.232.83/3210.13.232.83 – 10.13.232.8310.13.232.83
2110.13.232.84/3210.13.232.84 – 10.13.232.8410.13.232.84
2210.13.232.85/3210.13.232.85 – 10.13.232.8510.13.232.85
2310.13.232.86/3210.13.232.86 – 10.13.232.8610.13.232.86
2410.13.232.87/3210.13.232.87 – 10.13.232.8710.13.232.87
2510.13.232.88/3210.13.232.88 – 10.13.232.8810.13.232.88
2610.13.232.89/3210.13.232.89 – 10.13.232.8910.13.232.89
2710.13.232.90/3210.13.232.90 – 10.13.232.9010.13.232.90
2810.13.232.91/3210.13.232.91 – 10.13.232.9110.13.232.91
2910.13.232.92/3210.13.232.92 – 10.13.232.9210.13.232.92
3010.13.232.93/3210.13.232.93 – 10.13.232.9310.13.232.93
3110.13.232.94/3210.13.232.94 – 10.13.232.9410.13.232.94
3210.13.232.95/3210.13.232.95 – 10.13.232.9510.13.232.95
3310.13.232.96/3210.13.232.96 – 10.13.232.9610.13.232.96
3410.13.232.97/3210.13.232.97 – 10.13.232.9710.13.232.97
3510.13.232.98/3210.13.232.98 – 10.13.232.9810.13.232.98
3610.13.232.99/3210.13.232.99 – 10.13.232.9910.13.232.99
3710.13.232.100/3210.13.232.100 – 10.13.232.10010.13.232.100
3810.13.232.101/3210.13.232.101 – 10.13.232.10110.13.232.101
3910.13.232.102/3210.13.232.102 – 10.13.232.10210.13.232.102
4010.13.232.103/3210.13.232.103 – 10.13.232.10310.13.232.103
4110.13.232.104/3210.13.232.104 – 10.13.232.10410.13.232.104
4210.13.232.105/3210.13.232.105 – 10.13.232.10510.13.232.105
4310.13.232.106/3210.13.232.106 – 10.13.232.10610.13.232.106
4410.13.232.107/3210.13.232.107 – 10.13.232.10710.13.232.107
4510.13.232.108/3210.13.232.108 – 10.13.232.10810.13.232.108
4610.13.232.109/3210.13.232.109 – 10.13.232.10910.13.232.109
4710.13.232.110/3210.13.232.110 – 10.13.232.11010.13.232.110
4810.13.232.111/3210.13.232.111 – 10.13.232.11110.13.232.111
4910.13.232.112/3210.13.232.112 – 10.13.232.11210.13.232.112
5010.13.232.113/3210.13.232.113 – 10.13.232.11310.13.232.113
5110.13.232.114/3210.13.232.114 – 10.13.232.11410.13.232.114
5210.13.232.115/3210.13.232.115 – 10.13.232.11510.13.232.115
5310.13.232.116/3210.13.232.116 – 10.13.232.11610.13.232.116
5410.13.232.117/3210.13.232.117 – 10.13.232.11710.13.232.117
5510.13.232.118/3210.13.232.118 – 10.13.232.11810.13.232.118
5610.13.232.119/3210.13.232.119 – 10.13.232.11910.13.232.119
5710.13.232.120/3210.13.232.120 – 10.13.232.12010.13.232.120
5810.13.232.121/3210.13.232.121 – 10.13.232.12110.13.232.121
5910.13.232.122/3210.13.232.122 – 10.13.232.12210.13.232.122
6010.13.232.123/3210.13.232.123 – 10.13.232.12310.13.232.123
6110.13.232.124/3210.13.232.124 – 10.13.232.12410.13.232.124
6210.13.232.125/3210.13.232.125 – 10.13.232.12510.13.232.125
6310.13.232.126/3210.13.232.126 – 10.13.232.12610.13.232.126
6410.13.232.127/3210.13.232.127 – 10.13.232.12710.13.232.127
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /26
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.19264621
/27255.255.255.22432302 split →
/28255.255.255.24016144 split →
/29255.255.255.248868 split →
/30255.255.255.2524216 split →
/31255.255.255.2542232 split →
/32255.255.255.2551164 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →