ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.13.231.0/24
network10.13.231.0/24
broadcast10.13.231.255
first host10.13.231.1
last host10.13.231.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.13.231.0/24
address00001010.00001101.11100111.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.00001101.11100111.00000000
broadcast00001010.00001101.11100111.11111111
green = network part, grey = host part
hex0x0a0de700
decimal168683264
reverse dns0.231.13.10.in-addr.arpa
ipv4-mapped::ffff:a0d:e700

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.13.231.0/3010.13.231.1 – 10.13.231.210.13.231.3
210.13.231.4/3010.13.231.5 – 10.13.231.610.13.231.7
310.13.231.8/3010.13.231.9 – 10.13.231.1010.13.231.11
410.13.231.12/3010.13.231.13 – 10.13.231.1410.13.231.15
510.13.231.16/3010.13.231.17 – 10.13.231.1810.13.231.19
610.13.231.20/3010.13.231.21 – 10.13.231.2210.13.231.23
710.13.231.24/3010.13.231.25 – 10.13.231.2610.13.231.27
810.13.231.28/3010.13.231.29 – 10.13.231.3010.13.231.31
910.13.231.32/3010.13.231.33 – 10.13.231.3410.13.231.35
1010.13.231.36/3010.13.231.37 – 10.13.231.3810.13.231.39
1110.13.231.40/3010.13.231.41 – 10.13.231.4210.13.231.43
1210.13.231.44/3010.13.231.45 – 10.13.231.4610.13.231.47
1310.13.231.48/3010.13.231.49 – 10.13.231.5010.13.231.51
1410.13.231.52/3010.13.231.53 – 10.13.231.5410.13.231.55
1510.13.231.56/3010.13.231.57 – 10.13.231.5810.13.231.59
1610.13.231.60/3010.13.231.61 – 10.13.231.6210.13.231.63
1710.13.231.64/3010.13.231.65 – 10.13.231.6610.13.231.67
1810.13.231.68/3010.13.231.69 – 10.13.231.7010.13.231.71
1910.13.231.72/3010.13.231.73 – 10.13.231.7410.13.231.75
2010.13.231.76/3010.13.231.77 – 10.13.231.7810.13.231.79
2110.13.231.80/3010.13.231.81 – 10.13.231.8210.13.231.83
2210.13.231.84/3010.13.231.85 – 10.13.231.8610.13.231.87
2310.13.231.88/3010.13.231.89 – 10.13.231.9010.13.231.91
2410.13.231.92/3010.13.231.93 – 10.13.231.9410.13.231.95
2510.13.231.96/3010.13.231.97 – 10.13.231.9810.13.231.99
2610.13.231.100/3010.13.231.101 – 10.13.231.10210.13.231.103
2710.13.231.104/3010.13.231.105 – 10.13.231.10610.13.231.107
2810.13.231.108/3010.13.231.109 – 10.13.231.11010.13.231.111
2910.13.231.112/3010.13.231.113 – 10.13.231.11410.13.231.115
3010.13.231.116/3010.13.231.117 – 10.13.231.11810.13.231.119
3110.13.231.120/3010.13.231.121 – 10.13.231.12210.13.231.123
3210.13.231.124/3010.13.231.125 – 10.13.231.12610.13.231.127
3310.13.231.128/3010.13.231.129 – 10.13.231.13010.13.231.131
3410.13.231.132/3010.13.231.133 – 10.13.231.13410.13.231.135
3510.13.231.136/3010.13.231.137 – 10.13.231.13810.13.231.139
3610.13.231.140/3010.13.231.141 – 10.13.231.14210.13.231.143
3710.13.231.144/3010.13.231.145 – 10.13.231.14610.13.231.147
3810.13.231.148/3010.13.231.149 – 10.13.231.15010.13.231.151
3910.13.231.152/3010.13.231.153 – 10.13.231.15410.13.231.155
4010.13.231.156/3010.13.231.157 – 10.13.231.15810.13.231.159
4110.13.231.160/3010.13.231.161 – 10.13.231.16210.13.231.163
4210.13.231.164/3010.13.231.165 – 10.13.231.16610.13.231.167
4310.13.231.168/3010.13.231.169 – 10.13.231.17010.13.231.171
4410.13.231.172/3010.13.231.173 – 10.13.231.17410.13.231.175
4510.13.231.176/3010.13.231.177 – 10.13.231.17810.13.231.179
4610.13.231.180/3010.13.231.181 – 10.13.231.18210.13.231.183
4710.13.231.184/3010.13.231.185 – 10.13.231.18610.13.231.187
4810.13.231.188/3010.13.231.189 – 10.13.231.19010.13.231.191
4910.13.231.192/3010.13.231.193 – 10.13.231.19410.13.231.195
5010.13.231.196/3010.13.231.197 – 10.13.231.19810.13.231.199
5110.13.231.200/3010.13.231.201 – 10.13.231.20210.13.231.203
5210.13.231.204/3010.13.231.205 – 10.13.231.20610.13.231.207
5310.13.231.208/3010.13.231.209 – 10.13.231.21010.13.231.211
5410.13.231.212/3010.13.231.213 – 10.13.231.21410.13.231.215
5510.13.231.216/3010.13.231.217 – 10.13.231.21810.13.231.219
5610.13.231.220/3010.13.231.221 – 10.13.231.22210.13.231.223
5710.13.231.224/3010.13.231.225 – 10.13.231.22610.13.231.227
5810.13.231.228/3010.13.231.229 – 10.13.231.23010.13.231.231
5910.13.231.232/3010.13.231.233 – 10.13.231.23410.13.231.235
6010.13.231.236/3010.13.231.237 – 10.13.231.23810.13.231.239
6110.13.231.240/3010.13.231.241 – 10.13.231.24210.13.231.243
6210.13.231.244/3010.13.231.245 – 10.13.231.24610.13.231.247
6310.13.231.248/3010.13.231.249 – 10.13.231.25010.13.231.251
6410.13.231.252/3010.13.231.253 – 10.13.231.25410.13.231.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →