ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.13.208.0/20
network10.13.208.0/20
broadcast10.13.223.255
first host10.13.208.1
last host10.13.223.254
subnet mask255.255.240.0
wildcard0.0.15.255
addresses4,096
usable hosts4,094
classA
ipcalc 10.13.208.0/20
address00001010.00001101.11010000.00000000
subnet mask11111111.11111111.11110000.00000000
network00001010.00001101.11010000.00000000
broadcast00001010.00001101.11011111.11111111
green = network part, grey = host part
hex0x0a0dd000
decimal168677376
reverse dns0.208.13.10.in-addr.arpa
ipv4-mapped::ffff:a0d:d000

/20 split into /25 · 32 subnets

close ×
#networkhost rangebroadcast
110.13.208.0/2510.13.208.1 – 10.13.208.12610.13.208.127
210.13.208.128/2510.13.208.129 – 10.13.208.25410.13.208.255
310.13.209.0/2510.13.209.1 – 10.13.209.12610.13.209.127
410.13.209.128/2510.13.209.129 – 10.13.209.25410.13.209.255
510.13.210.0/2510.13.210.1 – 10.13.210.12610.13.210.127
610.13.210.128/2510.13.210.129 – 10.13.210.25410.13.210.255
710.13.211.0/2510.13.211.1 – 10.13.211.12610.13.211.127
810.13.211.128/2510.13.211.129 – 10.13.211.25410.13.211.255
910.13.212.0/2510.13.212.1 – 10.13.212.12610.13.212.127
1010.13.212.128/2510.13.212.129 – 10.13.212.25410.13.212.255
1110.13.213.0/2510.13.213.1 – 10.13.213.12610.13.213.127
1210.13.213.128/2510.13.213.129 – 10.13.213.25410.13.213.255
1310.13.214.0/2510.13.214.1 – 10.13.214.12610.13.214.127
1410.13.214.128/2510.13.214.129 – 10.13.214.25410.13.214.255
1510.13.215.0/2510.13.215.1 – 10.13.215.12610.13.215.127
1610.13.215.128/2510.13.215.129 – 10.13.215.25410.13.215.255
1710.13.216.0/2510.13.216.1 – 10.13.216.12610.13.216.127
1810.13.216.128/2510.13.216.129 – 10.13.216.25410.13.216.255
1910.13.217.0/2510.13.217.1 – 10.13.217.12610.13.217.127
2010.13.217.128/2510.13.217.129 – 10.13.217.25410.13.217.255
2110.13.218.0/2510.13.218.1 – 10.13.218.12610.13.218.127
2210.13.218.128/2510.13.218.129 – 10.13.218.25410.13.218.255
2310.13.219.0/2510.13.219.1 – 10.13.219.12610.13.219.127
2410.13.219.128/2510.13.219.129 – 10.13.219.25410.13.219.255
2510.13.220.0/2510.13.220.1 – 10.13.220.12610.13.220.127
2610.13.220.128/2510.13.220.129 – 10.13.220.25410.13.220.255
2710.13.221.0/2510.13.221.1 – 10.13.221.12610.13.221.127
2810.13.221.128/2510.13.221.129 – 10.13.221.25410.13.221.255
2910.13.222.0/2510.13.222.1 – 10.13.222.12610.13.222.127
3010.13.222.128/2510.13.222.129 – 10.13.222.25410.13.222.255
3110.13.223.0/2510.13.223.1 – 10.13.223.12610.13.223.127
3210.13.223.128/2510.13.223.129 – 10.13.223.25410.13.223.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /20
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,0941
/21255.255.248.02,0482,0462 split →
/22255.255.252.01,0241,0224 split →
/23255.255.254.05125108 split →
/24255.255.255.025625416 split →
/25255.255.255.12812812632 split →
/26255.255.255.192646264 split →
/27255.255.255.2243230128 split →
/28255.255.255.2401614256 split →
/29255.255.255.24886512 split →
/30255.255.255.252421,024 split →
/31255.255.255.254222,048 split →
/32255.255.255.255114,096 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →