IPv4 Subnet Calculator
Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.
private IP (RFC 1918)10.11.64.0/19
network10.11.64.0/19
broadcast10.11.95.255
first host10.11.64.1
last host10.11.95.254
subnet mask255.255.224.0
wildcard0.0.31.255
addresses8,192
usable hosts8,190
classA
ipcalc 10.11.64.0/19
address00001010.00001011.01000000.00000000
subnet mask11111111.11111111.11100000.00000000
network00001010.00001011.01000000.00000000
broadcast00001010.00001011.01011111.11111111
green = network part, grey = host part
hex0x0a0b4000
decimal168509440
reverse dns0.64.11.10.in-addr.arpa
ipv4-mapped::ffff:a0b:4000
/19 split into /24 · 32 subnets
close ×| # | network | host range | broadcast |
|---|---|---|---|
| 1 | 10.11.64.0/24 | 10.11.64.1 – 10.11.64.254 | 10.11.64.255 |
| 2 | 10.11.65.0/24 | 10.11.65.1 – 10.11.65.254 | 10.11.65.255 |
| 3 | 10.11.66.0/24 | 10.11.66.1 – 10.11.66.254 | 10.11.66.255 |
| 4 | 10.11.67.0/24 | 10.11.67.1 – 10.11.67.254 | 10.11.67.255 |
| 5 | 10.11.68.0/24 | 10.11.68.1 – 10.11.68.254 | 10.11.68.255 |
| 6 | 10.11.69.0/24 | 10.11.69.1 – 10.11.69.254 | 10.11.69.255 |
| 7 | 10.11.70.0/24 | 10.11.70.1 – 10.11.70.254 | 10.11.70.255 |
| 8 | 10.11.71.0/24 | 10.11.71.1 – 10.11.71.254 | 10.11.71.255 |
| 9 | 10.11.72.0/24 | 10.11.72.1 – 10.11.72.254 | 10.11.72.255 |
| 10 | 10.11.73.0/24 | 10.11.73.1 – 10.11.73.254 | 10.11.73.255 |
| 11 | 10.11.74.0/24 | 10.11.74.1 – 10.11.74.254 | 10.11.74.255 |
| 12 | 10.11.75.0/24 | 10.11.75.1 – 10.11.75.254 | 10.11.75.255 |
| 13 | 10.11.76.0/24 | 10.11.76.1 – 10.11.76.254 | 10.11.76.255 |
| 14 | 10.11.77.0/24 | 10.11.77.1 – 10.11.77.254 | 10.11.77.255 |
| 15 | 10.11.78.0/24 | 10.11.78.1 – 10.11.78.254 | 10.11.78.255 |
| 16 | 10.11.79.0/24 | 10.11.79.1 – 10.11.79.254 | 10.11.79.255 |
| 17 | 10.11.80.0/24 | 10.11.80.1 – 10.11.80.254 | 10.11.80.255 |
| 18 | 10.11.81.0/24 | 10.11.81.1 – 10.11.81.254 | 10.11.81.255 |
| 19 | 10.11.82.0/24 | 10.11.82.1 – 10.11.82.254 | 10.11.82.255 |
| 20 | 10.11.83.0/24 | 10.11.83.1 – 10.11.83.254 | 10.11.83.255 |
| 21 | 10.11.84.0/24 | 10.11.84.1 – 10.11.84.254 | 10.11.84.255 |
| 22 | 10.11.85.0/24 | 10.11.85.1 – 10.11.85.254 | 10.11.85.255 |
| 23 | 10.11.86.0/24 | 10.11.86.1 – 10.11.86.254 | 10.11.86.255 |
| 24 | 10.11.87.0/24 | 10.11.87.1 – 10.11.87.254 | 10.11.87.255 |
| 25 | 10.11.88.0/24 | 10.11.88.1 – 10.11.88.254 | 10.11.88.255 |
| 26 | 10.11.89.0/24 | 10.11.89.1 – 10.11.89.254 | 10.11.89.255 |
| 27 | 10.11.90.0/24 | 10.11.90.1 – 10.11.90.254 | 10.11.90.255 |
| 28 | 10.11.91.0/24 | 10.11.91.1 – 10.11.91.254 | 10.11.91.255 |
| 29 | 10.11.92.0/24 | 10.11.92.1 – 10.11.92.254 | 10.11.92.255 |
| 30 | 10.11.93.0/24 | 10.11.93.1 – 10.11.93.254 | 10.11.93.255 |
| 31 | 10.11.94.0/24 | 10.11.94.1 – 10.11.94.254 | 10.11.94.255 |
| 32 | 10.11.95.0/24 | 10.11.95.1 – 10.11.95.254 | 10.11.95.255 |
01 / table
IPv4 CIDR prefix table.
Click a prefix longer than your network to split it into subnets.
| prefix | subnet mask | addresses | hosts | in your /19 |
|---|---|---|---|---|
| /0 | 0.0.0.0 | 4,294,967,296 | 4,294,967,294 | - |
| /1 | 128.0.0.0 | 2,147,483,648 | 2,147,483,646 | - |
| /2 | 192.0.0.0 | 1,073,741,824 | 1,073,741,822 | - |
| /3 | 224.0.0.0 | 536,870,912 | 536,870,910 | - |
| /4 | 240.0.0.0 | 268,435,456 | 268,435,454 | - |
| /5 | 248.0.0.0 | 134,217,728 | 134,217,726 | - |
| /6 | 252.0.0.0 | 67,108,864 | 67,108,862 | - |
| /7 | 254.0.0.0 | 33,554,432 | 33,554,430 | - |
| /8 | 255.0.0.0 | 16,777,216 | 16,777,214 | - |
| /9 | 255.128.0.0 | 8,388,608 | 8,388,606 | - |
| /10 | 255.192.0.0 | 4,194,304 | 4,194,302 | - |
| /11 | 255.224.0.0 | 2,097,152 | 2,097,150 | - |
| /12 | 255.240.0.0 | 1,048,576 | 1,048,574 | - |
| /13 | 255.248.0.0 | 524,288 | 524,286 | - |
| /14 | 255.252.0.0 | 262,144 | 262,142 | - |
| /15 | 255.254.0.0 | 131,072 | 131,070 | - |
| /16 | 255.255.0.0 | 65,536 | 65,534 | - |
| /17 | 255.255.128.0 | 32,768 | 32,766 | - |
| /18 | 255.255.192.0 | 16,384 | 16,382 | - |
| /19 | 255.255.224.0 | 8,192 | 8,190 | 1 |
| /20 | 255.255.240.0 | 4,096 | 4,094 | 2 split → |
| /21 | 255.255.248.0 | 2,048 | 2,046 | 4 split → |
| /22 | 255.255.252.0 | 1,024 | 1,022 | 8 split → |
| /23 | 255.255.254.0 | 512 | 510 | 16 split → |
| /24 | 255.255.255.0 | 256 | 254 | 32 split → |
| /25 | 255.255.255.128 | 128 | 126 | 64 split → |
| /26 | 255.255.255.192 | 64 | 62 | 128 split → |
| /27 | 255.255.255.224 | 32 | 30 | 256 split → |
| /28 | 255.255.255.240 | 16 | 14 | 512 split → |
| /29 | 255.255.255.248 | 8 | 6 | 1,024 split → |
| /30 | 255.255.255.252 | 4 | 2 | 2,048 split → |
| /31 | 255.255.255.254 | 2 | 2 | 4,096 split → |
| /32 | 255.255.255.255 | 1 | 1 | 8,192 split → |
02 / faq
About this calculator.
How do I use this subnet calculator?
▼
Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.
Why are usable hosts always 2 fewer?
▼
The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.
Can I use it from a terminal?
▼
Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.